BLFS制作KDE的命令
来源：互联网 发布：联想网络同传 编辑：程序博客网 时间：2024/06/05 14:15
BLFS
wget
wget http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
tar xvf wget-1.10.2.tar.gz
cd wget-1.10.2
./configure –prefix=/usr –sysconfdir=/etc&&
make
make install
openssh
wgethttp://www.openssl.org/source/openssl-0.9.8g.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/6.3/openssl-0.9.8g-fix_manpages-1.patch
wget ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-4.7p1.tar.gz
wget http://www.linuxfromscratch.org/blfs/downloads/6.2.0/blfs-bootscripts-20060910.tar.bz2
tar xvfopenssl-0.9.8g.tar.gz
cd openssl-0.9.8g
patch -Np1 -i ../openssl-0.9.8g-fix_manpages-1.patch &&
./config --openssldir=/etc/ssl --prefix=/usr shared &&
make MANDIR=/usr/share/man
make test
make MANDIR=/usr/share/man install &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-0.9.8g &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-0.9.8g
cd ..
rm -rf openssl-0.9.8g
-------------openssh----------------
tar xvf openssh-4.7p1.tar.gz
cd openssh-4.7p1
install -v -m700 -d /var/lib/sshd &&
chown -v root:sys /var/lib/sshd &&
groupadd -g 50 sshd &&
useradd -c 'sshd PrivSep' -d /var/lib/sshd -g sshd \
-s /bin/false -u 50 sshd
sed -i 's@-lcrypto@/usr/lib/libcrypto.a -ldl@' configure
sed -i 's@ -ldes@@' configure &&
./configure --prefix=/usr --sysconfdir=/etc/ssh --datadir=/usr/share/sshd \
--libexecdir=/usr/lib/openssh --with-md5-passwords \
--with-privsep-path=/var/lib/sshd \
--with-xauth=/usr/bin/xauth &&
make
if test -f /usr/bin/scp
then
mv /usr/bin/scp /usr/bin/scp-bak
fi &&
cp scp /usr/bin/scp &&
make tests 2>&1 | tee check.log
grep "FATAL" check.log
rm /usr/bin/scp &&
if test -f /usr/bin/scp-bak
then
rm /usr/bin/scp-bak
fi &&
make install &&
install -v -m755 -d /usr/share/doc/openssh-4.7p1 &&
install -v -m644 INSTALL LICENCE OVERVIEW README* WARNING.RNG \
/usr/share/doc/openssh-4.7p1
cd ..
rm -rf openssh-4.7p1
----------------blfs-bootscripts----------------
tar xvf blfs-bootscripts-20060910.tar.bz2
cd blfs-bootscripts-20060910
make install-sshd
cd ..
rm -rf blfs-bootscripts-20060910
在blfs-bootscripts里面makeinstall-sshd后ssh就会自动启动，这时候就可以复制粘贴命令了。
libpang
wget http://downloads.sourceforge.net/libpng/libpng-1.2.12.tar.bz2
tar -xvf libpng-1.2.12.tar.bz2
cd libpng-1.2.12
./configure --prefix=/usr &&
make
make install &&
install -v -m755 -d/usr/share/doc/libpng-1.2.12 &&
install -v -m644 README libpng.txt/usr/share/doc/libpng-1.2.12
cd ..
rm -rf libpng-1.2.12
expat-2.0.0
wget http://downloads.sourceforge.net/expat/expat-2.0.0.tar.gz
tar -zxvf expat-2.0.0.tar.gz
cd expat-2.0.0
./configure --prefix=/usr &&
make
make install &&
install -v -m755 -d/usr/share/doc/expat-2.0.0 &&
install -v -m644 doc/*.{html,png,css}/usr/share/doc/expat-2.0.0
cd ..
rm -rf expat-2.0.0
freetype-2.1.10
wget http://downloads.sourceforge.net/freetype/freetype-2.1.10.tar.bz2
wget http://downloads.sourceforge.net/freetype/freetype-doc-2.1.10.tar.bz2
tar -jxvf freetype-2.1.10.tar.bz2
cd freetype-2.1.10
tar xf ../freetype-doc-2.1.10.tar.bz2 \
--strip-components=2 -C docs
sed -i -r -e 's:.*(#.*BYTE.*) .*:\1:' \
-e 's:.*(#.*SUBPIX.*) .*:\1:' \
include/freetype/config/ftoption.h &&
./configure --prefix=/usr &&
make
make install &&
install -v -m755 -d /usr/share/doc/freetype-2.1.10&&
cp -v -R docs/* /usr/share/doc/freetype-2.1.10
cd ..
rm -rf freetype-2.1.10
fontconfig-2.3.2
wget http://fontconfig.org/release/fontconfig-2.3.2.tar.gz
tar -zxvf fontconfig-2.3.2.tar.gz
cd fontconfig-2.3.2
./configure --prefix=/usr --sysconfdir=/etc--disable-docs &&
make
make install &&
install -v -m755 -d/usr/share/doc/fontconfig/fontconfig-devel &&
install -v -m644 doc/*.3/usr/share/man/man3 &&
install -v -m644 doc/*.5/usr/share/man/man5 &&
install -v -m644 doc/*.{html,pdf,txt}/usr/share/doc/fontconfig &&
install -v -m644 doc/fontconfig-devel/* \
/usr/share/doc/fontconfig/fontconfig-devel
cd ..
rm -rf fontconfig-2.3.2
linux-pam-0.99.10.0
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/l/Linux-PAM-0.99.10.0.tar.bz2
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/l/Linux-PAM-0.99.10.0-docs.tar.bz2
tar -jxvfLinux-PAM-0.99.10.0.tar.bz2
cd Linux-PAM-0.99.10.0
./configure --libdir=/lib \
--sbindir=/lib/security \
--enable-securedir=/lib/security \
--docdir=/usr/share/doc/Linux-PAM-0.99.10.0 \
--enable-read-both-confs \
--with-xauth=/usr/X11R6/bin/xauth &&
make
make install &&
chmod -v 4755 /lib/security/unix_chkpwd&&
mv -v /lib/security/pam_tally /sbin&&
mv -v /lib/libpam{,c,_misc}.la /usr/lib&&
sed -i 's| /lib| /usr/lib|'/usr/lib/libpam_misc.la &&
if [ -L /lib/libpam.so ]; then
for LINK in libpam{,c,_misc}.so; do
ln -v -sf ../../lib/$(readlink /lib/${LINK}) /usr/lib/${LINK} &&
rm -v /lib/${LINK}
done
fi
cd ..
rm -rf Linux-PAM-0.99.10.0
Xorg-6.9.0
wget http://xorg.freedesktop.org/releases/X11R6.9.0/src-single/X11R6.9.0-src.tar.bz2
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/xorg-6.9.0-luit_race-1.patch
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/xorg-6.9.0-security-4.patch
tar-jxvf X11R6.9.0-src.tar.bz2
cd xc
patch-Np1 -i ../xorg-6.9.0-luit_race-1.patch &&
patch-Np1 -i ../xorg-6.9.0-security-4.patch
sed -i's@/usr/X11R6@</usr>@' programs/luit/parser.h
sed -i '/^SUBDIRS =/s/ etc$//'programs/Xserver/Xprint/Imakefile
pushd config/util &&
make -f Makefile.ini lndir
popd
mkdir ../xcbuild &&
cd ../xcbuild &&
../xc/config/util/lndir ../xc
cat > config/cf/host.def << "EOF"
/* Begin Xorg host.def file */
/* System Related Information. If you read and configure only one
* section then itshould be this one. The Intel architecturedefaults
* are set for ai686 and higher. Axp is for the Alphaarchitecture
* and Ppc is forthe Power PC. AMD64 is for the Opteronprocessor.
* Note that therehave been reports that the Ppc optimization line
* causessegmentation faults during build. Ifthat happens, try
* building withoutthe DefaultGcc2PpcOpt line. ***********/
/* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \
-fno-strict-aliasing -march=i686 */
/* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \
-fno-strict-aliasing */
/* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */
/* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */
#define HasFreetype2 YES
#define HasFontconfig YES
#define HasExpat YES
#define HasLibpng YES
#define HasZlib YES
/* Uncomment the following define if you'd like
* xdm to useLinux-PAM
#define HasPam YES
*/
/*
* Which drivers tobuild. When building a static server,each of
* these will beincluded in it. When building theloadable server
* each of thesemodules will be built.
*
#define XF86CardDrivers mga glint nv tga s3virge sis rendition\
neomagic i740 tdfxsavage \
cirrus vmwaretseng trident chips apm \
GlideDriverfbdev i128 \
atiDevelDrivers ark \
cyrix siliconmotion vesa vga \
XF86OSCardDrivers XF86ExtraCardDrivers
*/
/*
* Select theXInput devices you want by uncommenting this.
*
#define XInputDrivers mouse keyboard acecad calcomp citron\
digitaledge dmcdynapro elographics \
microtouchmutouch penmount spaceorb \
summa wacomvoid magictouch aiptek
*/
/* Most installs will only need this */
#define XInputDrivers mouse keyboard
/* Xterm is no longer built by default */
#define BuildXterm YES
/* Disable building Xprint server and clients until weget them figured
* out but buildXprint libraries to allow precompiled binaries such as
* Acrobat Readerto run.
*/
#define XprtServer NO
#define BuildXprintClients NO
/* Uncomment the following define if you would prefer toinstall X into
* /usr or changeit to any other location that you prefer.
* The GL relateddefines disable compatibility symlinks (the links
* are not neededwhen X is installed in /usr).
#define ProjectRoot /usr
#define LinkGLToUsrInclude NO
#define LinkGLToUsrLib NO
*/
/* End Xorg host.def file */
EOF
sed -i -e "s@^#include <linux/config.h>@/*& */@" \
`grep -lrlinux/config.h *` &&
( make World 2>&1 | tee xorg-compile.log&& exit $PIPESTATUS )
make install &&
make install.man
ln -v -s ../X11R6/bin /usr/bin/X11 &&
ln -v -s ../X11R6/lib/X11 /usr/lib/X11 &&
ln -v -s ../X11R6/include/X11 /usr/include/X11
install -d -m755 /usr/share/fonts &&
ln -svn /usr/X11R6/lib/X11/fonts/OTF/usr/share/fonts/X11-OTF &&
ln -svn /usr/X11R6/lib/X11/fonts/TTF/usr/share/fonts/X11-TTF
cat >> /etc/ld.so.conf << "EOF"&&
/usr/X11R6/lib
EOF
ldconfig &&
cat >> /etc/profile << "EOF"&&
export PATH=$PATH:/usr/X11R6/bin
exportPKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/X11R6/lib/pkgconfig
EOF
/sbin/ldconfig &&
cd ~ &&
Xorg –configure
install -v -m755 -D ~/xorg.conf.new /etc/X11/xorg.conf
cat > ~/.xinitrc << "EOF" &&
# Begin .xinitrc file
xterm -g 80x40+0+0 &
xclock -g 100x100-0+0 &
twm
EOF
cat >> /etc/sysconfig/createfiles <<"EOF"
/tmp/.ICE-unix dir 1777 root root
EOF
pkg-config-0.20
wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.20.tar.gz
tar -zxvf pkg-config-0.20.tar.gz
cd pkg-config-0.20
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf pkg-config-0.20
glib-2.10.3
wget http://ftp.gnome.org/pub/gnome/sources/glib/2.12/glib-2.12.12.tar.bz2
tar -jxvf glib-2.12.12.tar.bz2
cd glib-2.12.12
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf glib-2.12.12
ATK-1.11.4
wget http://ftp.gnome.org/pub/gnome/sources/atk/1.11/atk-1.11.4.tar.bz2
tar -jxvf atk-1.11.4.tar.bz2
cd atk-1.11.4
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf atk-1.11.4
cairo-1.2.4
wget http://cairographics.org/releases/cairo-1.2.4.tar.gz
tar xvf cairo-1.2.4.tar.gz
cd cairo-1.2.4
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf cairo-1.2.4
Pango-1.12.3
wget http://ftp.gnome.org/pub/gnome/sources/pango/1.12/pango-1.12.3.tar.bz2
tar -jxvf pango-1.12.3.tar.bz2
cd pango-1.12.3
./configure --prefix=/usr --sysconfdir=/etc &&
make
make install
cd ..
rm -rf pango-1.12.3
libtiff-3.8.2
wget http://libtiff.maptools.org/dl/tiff-3.8.2.tar.gz
tar -zxvf tiff-3.8.2.tar.gz
cd tiff-3.8.2
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf tiff-3.8.2
GTK+-2.10.13
wget http://ftp.gnome.org/pub/gnome/sources/gtk+/2.10/gtk+-2.10.13.tar.bz2
tar -jxvf gtk+-2.10.13.tar.bz2
cd gtk+-2.10.13
./configure --prefix=/usr --sysconfdir=/etc --without-libjpeg&&
make
make install &&
install -v -m755 -d /usr/share/doc/gtk+-2.10.13/{faq,tutorial}&&
cp -v -R docs/faq/html/* /usr/share/doc/gtk+-2.10.13/faq&&
cp -v -R docs/tutorial/html/*/usr/share/doc/gtk+-2.10.13/tutorial &&
install -v -m644 docs/*.txt /usr/share/doc/gtk+-2.10.13
cd ..
rm -rf gtk+-2.8.20
libjpeg-6b
wget http://www.ijg.org/files/jpegsrc.v6b.tar.gz
tar xvf jpegsrc.v6b.tar.gz
cd jpeg-6b
./configure --prefix=/usr --enable-static --enable-shared&&
make
make install
cd ..
rm -rf jpeg-6b
little cms-1.15
wget http://www.littlecms.com/lcms-1.16.tar.gz
tar xvf lcms-1.16.tar.gz
cd lcms-1.16
patch -Np1 -i ../lcms-1.16-swig_fixes-1.patch &&
./configure --prefix=/usr &&
make
make install &&
install -v -m755 -d /usr/share/doc/lcms-1.16 &&
install -v -m644 README.1ST doc/*/usr/share/doc/lcms-1.16cd
cd ..
rm -rf lcms-1.16
libmng-1.0.9
wget http://downloads.sourceforge.net/libmng/libmng-1.0.9.tar.gz
tar xvf libmng-1.0.9.tar.gz
cd libmng-1.0.9
cp makefiles/makefile.linux Makefile&&
make
make prefix=/usr install &&
install -v -m644 doc/man/*.3/usr/share/man/man3 &&
install -v -m644 doc/man/*.5/usr/share/man/man5 &&
install -v -m755 -d/usr/share/doc/libmng-1.0.9 &&
install -v -m644 doc/*.{png,txt}/usr/share/doc/libmng-1.0.9
cd ..
rm -rf libmng-1.0.9
blfs-bootscripts-20060910.tar.bz2
wget http://www.linuxfromscratch.org/blfs...060910.tar.bz2
tar -jxvf blfs-bootscripts-20060910.tar.bz2
nas-1.7
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/n/nas-1.9.src.tar.gz
tar xvf nas-1.9.src.tar.gz
cd nas-1.9
xmkmf &&
make World
make install install.man &&
install -v -m755 -d/usr/share/doc/nas-1.9/{html,pdf} &&
install -v -m644 doc/html/*/usr/share/doc/nas-1.9/html &&
install -v -m644 doc/pdf/*/usr/share/doc/nas-1.9/pdf &&
install -v -m644doc/{README,actions,*.{ps,txt}} \
/usr/share/doc/nas-1.9
cd ..
rm -rf nas-1.9
qt-3.3.8b
wget http://ftp.silug.org/mirrors/ftp.trolltech.com/qt/source/qt-x11-free-3.3.8b.tar.gz
tar -zxvfqt-x11-free-3.3.8b.tar.gz
cdqt-x11-free-3.3.8b
sed -i'/QMAKE_RPATH/d' mkspecs/linux*/qmake.conf
exportQTDIR=$PWD &&
exportLD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
exportPATH=$PWD/bin:$PATH
./configure-prefix /opt/qt-3.3.8b \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
makemakesub-tools
make install&&
ln -v -sfnqt-3.3.8b /opt/qt-3.3.8b &&
ln -v -slibqt-mt.so /opt/qt-3.3.8b/lib/libqt.so &&
cp -v -r doc/man/opt/qt-3.3.8b/doc &&
cp -v -rexamples /opt/qt-3.3.8b/doc
exportQTDIR=/opt/qt-3.3.8b
cat >>/etc/ld.so.conf << "EOF" &&
# Begin qtaddition to /etc/ld.so.conf
/opt/qt/lib
# End qt addition
EOF
ldconfig&&
cat >>/etc/man_db.conf << "EOF"
# Begin qtaddition to man_db.conf
MANDATORY_MANPATH/opt/qt/doc/man
# End qtaddition to man_db.conf
EOF
ldconfig&&
cat >>/etc/man_db.conf << "EOF"
# Begin qtaddition to man_db.conf
MANDATORY_MANPATH/opt/qt/doc/man
# End qtaddition to man_db.conf
EOF
cat >>/etc/profile << "EOF"
exportPATH=$PATH:/opt/qt/bin
exportPKG_CONFIG_PATH=$PKG_CONFIG_PATH:/opt/qt/lib/pkgconfig
EOF
cd ..
alsa-lib-1.0.13
wget http://gd.tuwien.ac.at/opsys/linux/alsa/lib/alsa-lib-1.0.13.tar.bz2
tar -jxvfalsa-lib-1.0.13.tar.bz2
cdalsa-lib-1.0.13
./configure--enable-static &&
make
make install&&
install -v -m644-D doc/asoundrc.txt \
/usr/share/doc/alsa-lib-1.0.13/asoundrc.txt
make doc
install -v -d-m755 /usr/share/doc/alsa-1.0.13/html &&
install -v -m644doc/doxygen/html/* /usr/share/doc/alsa-1.0.13/html
cd ..
rm -rfalsa-lib-1.0.13
alsa-plugins-1.0.13
wget http://gd.tuwien.ac.at/opsys/linux/alsa/plugins/alsa-plugins-1.0.13.tar.bz2
tar -jxvf alsa-plugins-1.0.13.tar.bz2
cd alsa-plugins-1.0.13
./configure &&
make
make install &&
install -v -m755 -d /usr/share/doc/alsa-plugins-1.0.13&&
install -v -m644 doc/{README*,*.txt} \
/usr/share/doc/alsa-plugins-1.0.13
cd ..
rm -rf alsa-plugins-1.0.13
alsa-utils-1.0.13
wget http://gd.tuwien.ac.at/opsys/linux/alsa/utils/alsa-utils-1.0.13.tar.bz2
tar -jxvfalsa-utils-1.0.13.tar.bz2
cdalsa-utils-1.0.13
./configure&&
make
make install
cd ..
rm -rfalsa-utils-1.0.13
cd../blfs-bootscripts-20060910
makeinstall-alsa
touch/etc/asound.state &&
alsactl store
cat >/etc/udev/rules.d/40-alsa.rules << "EOF"
#/etc/udev/rules.d/40-alsa.rules
# When a sounddevice is detected, restore the volume settings
KERNEL=="controlC[0-9]*",ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
EOF
chmod -v 644/etc/udev/rules.d/40-alsa.rules
alsa-tools-1.0.13
wget http://gd.tuwien.ac.at/opsys/linux/alsa/tools/alsa-tools-1.0.13.tar.bz2
tar -jxvfalsa-tools-1.0.13.tar.bz2
cdalsa-tools-1.0.13
cd ac3dec
./configure--prefix=/usr &&
make
make install
cd ../..
rm -rfalsa-tools-1.0.13
alsa-oss-1.0.12
wget http://gd.tuwien.ac.at/opsys/linux/alsa/oss-lib/alsa-oss-1.0.12.tar.bz2
tar -jxvfalsa-oss-1.0.12.tar.bz2
cdalsa-oss-1.0.12
./configure&&
make
make install
cd ..
rm -rfalsa-oss-1.0.12
audiofile-0.2.6
wget http://www.68k.org/~michael/audiofile/audiofile-0.2.6.tar.gz
tar -zxvf audiofile-0.2.6.tar.gz
./configure--prefix=/usr &&
make
make install
cd ..
rm -rfaudiofile-0.2.6
EsounD-0.2.36
wget http://ftp.gnome.org/pub/gnome/sources/esound/0.2/esound-0.2.36.tar.bz2
tar -jxvfesound-0.2.36.tar.bz2
cd esound-0.2.36
sed -i's@doc/esound@&-0.2.36@' configure &&
./configure--prefix=/usr --sysconfdir=/etc &&
make
make install
cp -v -Rdocs/html /usr/share/doc/esound-0.2.36
cd ..
rm -rfesound-0.2.36
SDL-1.2.11
wget http://www.libsdl.org/release/SDL-1.2.11.tar.gz
tar zxvfSDL-1.2.11.tar.gz
cd SDL-1.2.11
./configure--prefix=/usr &&
make
make install&&
install -v -m755-d /usr/share/doc/SDL-1.2.11/html &&
install -v -m644docs/html/*.html /usr/share/doc/SDL-1.2.11/html
cd ..
rm -rfSDL-1.2.11
Libao-0.8.6
wget http://downloads.xiph.org/releases/ao/libao-0.8.6.tar.gz
tar xvflibao-0.8.6.tar.gz
cd libao-0.8.6
./configure--prefix=/usr &&
make
make install
cd ..
rm -rflibao-0.8.6
libogg-1.1.3
wget http://downloads.xiph.org/releases/ogg/libogg-1.1.3.tar.gz
tar -xvf libogg-1.1.3.tar.gz
cd libogg-1.1.3
./configure --prefix=/usr &&
make
make install
cd ..
rm -rf libogg-1.1.3
libvorbis-1.1.2
wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.1.2.tar.gz
tar xvflibvorbis-1.1.2.tar.gz
cdlibvorbis-1.1.2
./configure--prefix=/usr &&
make
sed -i.bak -e's/-mno-ieee-fp//' lib/Makefile
make install&&
install -v-m644 doc/Vorbis* /usr/share/doc/libvorbis-1.1.2
cd ..
rm -rflibvorbis-1.1.2
nasm-0.98.39
wget http://downloads.sourceforge.net/nasm/nasm-0.98.39.tar.bz2
wget http://www.linuxfromscratch.org/patches/blfs/6.3/nasm-0.98.39-security_fix-1.patch
tar -jxvfnasm-0.98.39.tar.bz2
cd nasm-0.98.39
patch -Np1 -i../nasm-0.98.39-security_fix-1.patch &&
./configure--prefix=/usr &&
make &&
make install&&
cd ..
rm -rfnasm-0.98.39
LibMPEG3-1.6
wget http://downloads.sourceforge.net/heroines/libmpeg3-1.6-src.tar.bz2
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/libmpeg3-1.6-blfs_install-1.patch
tar -jxvf libmpeg3-1.6-src.tar.bz2
cd libmpeg3-1.6
patch -Np1 -i../libmpeg3-1.6-blfs_install-1.patch &&
./configure&&
make
make install
cd ..
rm -rflibmpeg3-1.6
libmad-0.15
wget ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/svn/libmad-0.15.1b-fixes-1.patch
tar xvflibmad-0.15.1b.tar.gz
cdlibmad-0.15.1b
patch -Np1 -i../libmad-0.15.1b-fixes-1.patch &&
sed"s@AM_CONFIG_HEADER@AC_CONFIG_HEADERS@g" -i configure.ac &&
touch NEWSAUTHORS ChangeLog &&
autoreconf –fi
./configure--prefix=/usr --disable-static &&
make
make install
cat >/usr/lib/pkgconfig/mad.pc << "EOF"
prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: mad
Description:MPEG audio decoder
Requires:
Version:0.15.1b
Libs:-L${libdir} -lmad
Cflags:-I${includedir}
EOF
cd ..
rm -rflibmad-0.15.1b
libquicktime-1.0.0
wget http://downloads.sourceforge.net/libquicktime/libquicktime-1.0.0.tar.gz
tar xvflibquicktime-1.0.0.tar.gz
cdlibquicktime-1.0.0
./configure--prefix=/usr &&
make
make install&&
install -v-m755 -d /usr/share/doc/libquicktime-1.0.0 &&
install -v-m644 READMEdoc/{*.txt,*.html,mainpage.incl} \
/usr/share/doc/libquicktime-1.0.0
cd ..
rm -rf libquicktime-1.0.0
libFAME-0.9.1
wget http://downloads.sourceforge.net/fame/libfame-0.9.1.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/libfame-0.9.1-gcc34-1.patch
tar zxvflibfame-0.9.1.tar.gz
cdlibfame-0.9.1
patch -Np1 -i../libfame-0.9.1-gcc34-1.patch &&
sed -i 's/$CC--version/$CC -dumpversion/' configure &&
./configure--prefix=/usr &&
make
make install
cd ..
rm -rflibfame-0.9.1
FLAC-1.1.2
wget http://downloads.sourceforge.net/flac/flac-1.1.2.tar.gz
tar zxvfflac-1.1.2.tar.gz
cd flac-1.1.2
LIBS=-lm./configure --prefix=/usr &&
make
make install
cd ..
rm -rfflac-1.1.2
Liba52-0.7.4
wget http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz
tar zxvfa52dec-0.7.4.tar.gz
cd a52dec-0.7.4
./configure--prefix=/usr --enable-shared &&
make
make install&&
cpliba52/a52_internal.h /usr/include/a52dec &&
install -v-m644 -D doc/liba52.txt \
/usr/share/doc/liba52-0.7.4/liba52.txt
cd ..
rm -rfa52dec-0.7.4
XviD-1.1.0
wget http://downloads.xvid.org/downloads/xvidcore-1.1.0.tar.bz2
tar -jxvfxvidcore-1.1.0.tar.bz2
cdxvidcore-1.1.0
cdbuild/generic &&
./configure--prefix=/usr &&
make
cd ../../..
rm -rfxvidcore-1.1.0
Mpg123-0.60
wget http://downloads.sourceforge.net/mpg123/mpg123-0.60.tar.bz2
tar -jxvfmpg123-0.60.tar.bz2
cd mpg123-0.60
./configure--prefix=/usr &&
make
make install
cd ..
rm -rfmpg123-0.60
VorbisTools-1.1.1
wget http://downloads.xiph.org/releases/vorbis/vorbis-tools-1.1.1.tar.gz
tar zxvfvorbis-tools-1.1.1.tar.gz
cdvorbis-tools-1.1.1
./configure--prefix=/usr --enable-vcut &&
make
make install
cd ..
rm -rfvorbis-tools-1.1.1
lame-3.96.1
wget http://downloads.sourceforge.net/lame/lame-3.96.1.tar.gz
tar zxvflame-3.96.1.tar.gz
cd lame-3.96.1
./configure--prefix=/usr --enable-mp3rtp &&
make
make install
cd ..
rm -rflame-3.96.1
ffmpeg-0.4.9-pre1
wget http://downloads.sourceforge.net/ffmpeg/ffmpeg-0.4.9-pre1.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/ffmpeg-0.4.9-pre1-gcc4-1.patch
wget http://www.linuxfromscratch.org/patches/blfs/6.2.0/ffmpeg-0.4.9-pre1-amr_fixes-1.patch
tar zxvfffmpeg-0.4.9-pre1.tar.gz
cdffmpeg-0.4.9-pre1
patch -Np1 -i../ffmpeg-0.4.9-pre1-gcc4-1.patch &&
patch -Np1 -i../ffmpeg-0.4.9-pre1-amr_fixes-1.patch &&
sed -i"s/static uint64/const uint64/" \
libavcodec/liba52/resample_mmx.c&&
./configure--prefix=/usr --enable-shared \
--enable-pthreads--disable-ffplay &&
make
make -C docff{mpeg,play,server}.1
make install
install -v-m755 -d /usr/share/doc/ffmpeg-0.4.9-pre1 &&
install -v-m644 doc/* /usr/share/doc/ffmpeg-0.4.9-pre1
cd ..
rm -rfffmpeg-0.4.9-pre1
Avifile-0.7.45
wget http://downloads.sourceforge.net/avifile/avifile-0.7-0.7.45.tar.bz2
wget http://www.linuxfromscratch.org/patches/blfs/6.3/avifile-0.7-0.7.45-gcc41-1.patch
wget http://downloads.sourceforge.net/avifile/binaries-011002.tgz
tar -jxvf avifile-0.7-0.7.45.tar.bz2
install -v -d-m755 /usr/lib/avifile-0.7/win32 &&
tar -xvf../avifile-binaries-011002.tgz -C /usr/lib/avifile-0.7
./configure--prefix=/usr \
--with-win32-path=/usr/lib/avifile-0.7/win32&&
make
make install
cd ..
rm -rf avifile-0.7-0.7.45
libart_lgpl-2.3.17
wget http://ftp.gnome.org/pub/gnome/sources/libart_lgpl/2.3/libart_lgpl-2.3.17.tar.bz2
tar -jxvflibart_lgpl-2.3.17.tar.bz2
cdlibart_lgpl-2.3.17
./configure--prefix=/usr &&
make
make install
cd ..
rm -rflibart_lgpl-2.3.17
libxml2-2.6.26
wget http://ftp.gnome.org/pub/gnome/sources/libxml2/2.6/libxml2-2.6.26.tar.gz
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/l/libxml2-2.6.31.tar.gz
tar xvflibxml2-2.6.31.tar.gz
cd libxml2-2.6.31
./configure--prefix=/usr &&
make
make install
cd ..
rm -rf libxml2-2.6.31
libxslt-1.1.17
wget http://ftp.gnome.org/pub/gnome/sources/libxslt/1.1/libxslt-1.1.17.tar.gz
tar xvflibxslt-1.1.17.tar.gz
cdlibxslt-1.1.17
./configure--prefix=/usr &&
make
make install
cd ..
rm -rflibxslt-1.1.17
pcre-7.6
wget http://downloads.sourceforge.net/pcre/pcre-7.6.tar.bz2
wget http://www.linuxfromscratch.org/patches/blfs/6.3/pcre-7.6-abi_breakage-1.patch
wget http://www.linuxfromscratch.org/patches/blfs/6.3/pcre-7.6-security_fix-1.patch
tar -jxvf pcre-7.6.tar.bz2
cd pcre-7.6
patch -Np1 -i../pcre-7.6-abi_breakage-1.patch &&
patch -Np1 -i../pcre-7.6-security_fix-1.patch &&
./configure--prefix=/usr \
--docdir=/usr/share/doc/pcre-7.6 \
--enable-utf8 \
--enable-pcregrep-libz \
--enable-pcregrep-libbz2 &&
make
make install
mv -v/usr/lib/libpcre.so.* /lib/ &&
ln -v -sf../../lib/libpcre.so.0 /usr/lib/libpcre.so
cd ..
rm -rf pcre-7.6
gamin-0.1.9
wget http://www.gnome.org/~veillard/gamin/sources/gamin-0.1.9.tar.gz
openssl-0.9.8d
wget http://www.openssl.org/source/openssl-0.9.8d.tar.gz
tar xvf gamin-0.1.9.tar.gz
cd gamin-0.1.9
./configure --prefix=/usr --libexecdir=/usr/sbin &&
make
make install &&
install -v -m755 -d /usr/share/doc/gamin-0.1.9 &&
install -v -m644 doc/*.{html,fig,gif,txt}/usr/share/doc/gamin-0.1.9
cd ..
rm -rf gamin-0.1.9
openssl-0.9.8d
wgetn http://www.openssl.org/source/openssl-0.9.8d.tar.gz
tar xvfopenssl-0.9.8d.tar.gz
cdopenssl-0.9.8d
sed -i -e's/mcpu/march/' config
patch -Np1 -i../openssl-0.9.8d-fix_manpages-1.patch &&
./config--openssldir=/etc/ssl --prefix=/usr shared &&
makeMANDIR=/usr/share/man
makeMANDIR=/usr/share/man install &&
cp -v -r certs/etc/ssl &&
install -v -d-m755 /usr/share/doc/openssl-0.9.8d &&
cp -v -rdoc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-0.9.8d
cd ..
rm -rfopenssl-0.9.8d
libidn-0.6.14
wget http://anduin.linuxfromscratch.org/sources/BLFS/6.3/l/libidn-0.6.14.tar.gz
tar xvflibidn-0.6.14.tar.gz
cd libidn-0.6.14
./configure--prefix=/usr &&
make
make install&&
find doc -name"Makefile*" -exec rm {} \; &&
install -v-m755 -d \
/usr/share/doc/libidn-0.6.14/{api,java,specifications,tld} &&
install -v-m644 doc/components* \
doc/libidn.{pdf,ps,html} \
/usr/share/doc/libidn-0.6.14 &&
install -v-m644 doc/reference/html/* \
/usr/share/doc/libidn-0.6.14/api &&
install -v-m644 doc/specifications/* \
/usr/share/doc/libidn-0.6.14/specifications&&
install -v-m644 doc/tld/* /usr/share/doc/libidn-0.6.14/tld &&
cp -v -Rdoc/java/* /usr/share/doc/libidn-0.6.14/java
cd ..
rm -rflibidn-0.6.14
graphviz-2.8
wget http://www.graphviz.org/pub/graphviz/ARCHIVE/graphviz-2.8.tar.gz
sed -i's|JAVA_LIBS=|& \
if test -n"$JAVA_HOME"; then \
CPPFLAGS="$CPPFLAGS -I$JAVA_HOME/include-I$JAVA_HOME/include/linux" \
fi|' configure&&
./configure--prefix=/usr &&
make
make install
ln -v -s/usr/share/graphviz/doc \
/usr/share/doc/graphviz-2.8
giflib-4.1.4
wget http://downloads.sourceforge.net/giflib/giflib-4.1.4.tar.bz2
tar -jxvf giflib-4.1.4.tar.bz2
doxygen-1.5.2
wget http://ftp.stack.nl/pub/users/dimitri/doxygen-1.5.2.src.tar.gz
tar zxvfdoxygen-1.5.2.src.tar.gz
cd doxygen-1.5.2
./configure--prefix /usr \
--docdir /usr/share/doc &&
make
make install
cd ..
rm -rfdoxygen-1.5.2
KDE Pre-installation Configuration
exportKDE_PREFIX=/opt/kde-3.5.9
cat >>/etc/profile << "EOF" &&
exportPATH=$PATH:/opt/kde-3.5.9/bin
exportPKG_CONFIG_PATH=$PKG_CONFIG_PATH:/opt/kde-3.5.9/lib/pkgconfig
EOF
cat >>/etc/ld.so.conf << "EOF"
# Begin kdeaddition to /etc/ld.so.conf
/opt/kde-3.5.9/lib
# End kdeaddition
EOF
cat >>/etc/man_db.conf << "EOF"
# Begin kdeaddition to man_db.conf
MANDATORY_MANPATH/opt/kde-3.5.9/man
# End kdeaddition to man_db.conf
EOF
arts-1.5.9
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/a/arts-1.5.9.tar.bz2
tar -jxvfarts-1.5.9.tar.bz2
cd arts-1.5.9
./configure--prefix=$KDE_PREFIX --disable-debug \
--disable-dependency-tracking &&
make
make install
cd ..
rm -rf arts-1.5.9
kdelibs-3.5.9
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/k/kdelibs-3.5.9.tar.bz2
tar -jxvf kdelibs-3.5.9.tar.bz2
cdkdelibs-3.5.9
./configure--prefix=$KDE_PREFIX \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking&&
LD_LIBRARY_PATH="$QTDIR/lib"make
make install
cd ..
rm -rf kdelibs-3.5.9
kdebase-3.5.9
wget ftp://ftp.lfs-matrix.net/pub/blfs/6.3/k/kdebase-3.5.9.tar.bz2
tar -jxvf kdebase-3.5.9.tar.bz2
cd kdebase-3.5.9
./configure--prefix=$KDE_PREFIX --sysconfdir=/etc/kde \
--disable-debug--disable-dependency-tracking &&
LD_LIBRARY_PATH="$KDE_PREFIX/lib"make
make install
cd ..
rm -rfkdebase-3.5.9
Configuring the Core KDE Packages
echo "execstartkde" > ~/.xinitrc
- BLFS制作KDE的命令
- BLFS
- BLFS的诱惑！(2007-11-08)
- LFS、BLFS、ALFS、HLFS的区别
- LFS、BLFS、ALFS、HLFS的区别
- BLFS,xfce安装完后遇到的问题
- KDE的MacMode
- 优化kde的方法
- kde下的软件
- KDE
- KDE
- KDE
- KDE
- KDE
- GNOME与KDE的战争
- LINUX的KDE安装详解
- GNOME与KDE的战争
- 如何获知KDE的版本
- VS配置路径和宏
- 如何在Tizen app大赛中获奖的
- Linux cp 命令
- Any容器
- qdebug使用方法
- BLFS制作KDE的命令
- iOS 图片毛玻璃效果
- 基于IBFV算法的二维矢量场可视化
- 哈市新建10个蔬菜设施园区 淡季蔬菜自给率达60%以上
- 怎么放代码
- C++中的累类！
- Struts2实现多文件上传
- CSDN的IP数据库太老了该更新了！2014.3
- 【C/C++】C++primer习题9.26中删除元素问题
