如果经常使用linux命令,技巧你需要必备
来源:互联网 发布:java 设置中奖率 编辑:程序博客网 时间:2024/05/16 10:18
使用 HISTTIMEFORMAT 显示时间戳
当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身。如果你想要查看命令历史的时间戳,那么可以执行:
# export HISTTIMEFORMAT='%F %T '# history | more1 2008-08-05 19:02:39 service network restart2 2008-08-05 19:02:39 exit3 2008-08-05 19:02:39 id4 2008-08-05 19:02:39 cat /etc/redhat-release
注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后,之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间。[感谢 NightOwl 读者补充]
使用 Ctrl+R 搜索历史
Ctrl+R 是我经常使用的一个快捷键。此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行该命令。如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。
# [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt](reverse-i-search)`red‘: cat /etc/redhat-release[Note: Press enter when you see your command, which will execute the command from the history]# cat /etc/redhat-releaseFedora release 9 (Sulphur)
快速重复执行上一条命令
有 4 种方法可以重复执行上一条命令:
- 使用上方向键,并回车执行。
- 按 !! 并回车执行。
- 输入 !-1 并回车执行。
- 按 Ctrl+P 并回车执行。
从命令历史中执行一个指定的命令
在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:
# history | more1 service network restart2 exit3 id4 cat /etc/redhat-release# !4cat /etc/redhat-releaseFedora release 9 (Sulphur)
通过指定关键字来执行以前的命令
在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:
# !psps aux | grep yproot 16947 0.0 0.1 36516 1264 ? Sl 13:10 0:00 ypbindroot 17503 0.0 0.0 4124 740 pts/0 S+ 19:19 0:00 grep yp
使用 HISTSIZE 控制历史命令记录的总行数
将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:
# vi ~/.bash_profileHISTSIZE=450HISTFILESIZE=450
使用 HISTFILE 更改历史文件名称
默认情况下,命令历史存储在 ~/.bashhistory 文件中。添加下列内容到 .bashprofile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:
# vi ~/.bash_profileHISTFILE=/root/.commandline_warrior
使用 HISTCONTROL 从命令历史中剔除连续重复的条目
在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目。要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:
# pwd# pwd# pwd# history | tail -444 pwd45 pwd46 pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]47 history | tail -4# export HISTCONTROL=ignoredups# pwd# pwd# pwd# history | tail -356 export HISTCONTROL=ignoredups57 pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]58 history | tail -4
使用 HISTCONTROL 清除整个命令历史中的重复条目
上例中的 ignoredups 只能剔除连续的重复条目。要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:
# export HISTCONTROL=erasedups# pwd# service httpd stop# history | tail -338 pwd39 service httpd stop40 history | tail -3# ls -ltr# service httpd stop# history | tail -635 export HISTCONTROL=erasedups36 pwd37 history | tail -338 ls -ltr39 service httpd stop[Note that the previous service httpd stop after pwd got erased]40 history | tail -6
使用 HISTCONTROL 强制 history 不记住特定的命令
将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:
# export HISTCONTROL=ignorespace# ls -ltr# pwd# service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]# history | tail -367 ls -ltr68 pwd69 history | tail -3
使用 -c 选项清除所有的命令历史
如果你想清除所有的命令历史,可以执行:
# history -c
命令替换
在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:
# ls anaconda-ks.cfganaconda-ks.cfg# vi !!:$vi anaconda-ks.cfg
补充:使用 !$ 可以达到同样的效果,而且更简单。[感谢 wanzigunzi 读者补充]
下例中,!^ 从上一条命令获得第一项参数:
# cp anaconda-ks.cfg anaconda-ks.cfg.bakanaconda-ks.cfg# vi -5 !^vi anaconda-ks.cfg
为特定的命令替换指定的参数
在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:
# cp ~/longname.txt /really/a/very/long/path/long-filename.txt# ls -l !cp:2ls -l /really/a/very/long/path/long-filename.txt
下例里,!cp:$ 获取 cp 命令的最后一项参数:
# ls -l !cp:$ls -l /really/a/very/long/path/long-filename.txt
使用 HISTSIZE 禁用 history
如果你想禁用 history,可以将 HISTSIZE 设置为 0:
# export HISTSIZE=0# history# [Note that history did not display anything]
使用 HISTIGNORE 忽略历史中的特定命令
下面的例子,将忽略 pwd、ls、ls -ltr 等命令:
# export HISTIGNORE=”pwd:ls:ls -ltr:”# pwd# ls# ls -ltr# service httpd stop# history | tail -379 export HISTIGNORE=”pwd:ls:ls -ltr:”80 service httpd stop81 history[Note that history did not record pwd, ls and ls -ltr]
https://linuxtoy.org/archives/history-command-usage-examples.html
- 如果经常使用linux命令,技巧你需要必备
- Linux必备命令技巧学习
- 新手必备:Linux系统命令和使用技巧8则
- LINUX经常使用命令详解
- LINUX经常使用命令详解
- 经常使用到的linux命令
- linux几个经常使用的命令
- 经常使用的Linux命令总结
- Linux下经常使用的命令
- 工作中经常使用的Linux命令
- unix&linux 经常使用的命令
- LINUX经常使用的命令详解
- Linux命令使用技巧
- Linux命令使用技巧
- LINUX 命令使用技巧
- 如果遇到Xshell键盘无法使用,你需要这样做!
- 如果你的男朋友使用linux------------
- Linux 命令经常更新
- android图像处理系列之五--给图片添加边框(中)
- inotify -- Linux 2.6 内核中的文件系统变化通知机制
- JAVA随机生成文件名:当前年月日时分秒+五位随机数
- unity 3d快熟使用KGFMapSystem开发小地图
- Java程序如何读取xxx.properties配置文件
- 如果经常使用linux命令,技巧你需要必备
- 字符编码杂谈
- android:inputType参数类型说明
- VS下OPenssl环境配置,个人些出现的问题及解决
- xcode4.4+ APP 打包以及提交apple审核详细流程(新版本更新提交审核)
- LinuxCast学习笔记二十二:vi与text操作
- 陶氏海水淡化膜渗透运行时应注意事项
- 苹果公司发布iPhone 5s和iPhone 5c
- 记录一些创建图标的方法