TTY Background causing high CPU load May 26th, 2009 · No Comments Using an old switch cisco C3548XL
来源:互联网 发布:project iina for mac 编辑:程序博客网 时间:2024/05/22 17:16
TTY Background causing high CPU load
May 26th, 2009 · No Comments
Using an old switch cisco C3548XL switch the CPU load was increasing gradually over a few months. Looking at the output of show proc the TTY Background process was usings 30-40% CPU load and the system overall was at 80-90%.
This caused some increased ping times, but, switching to the other machines on the switch was fine. Best solution is to schedule some downtime and reboot… also, possibly remove the “logging synchronous” statement under the line con 0 interface.
URL:
TTY Background taking over 60% of CPU???, Cisco
Troubleshooting High CPU Utilization due to Processes – Cisco Systems
Catalyst 3550 Series Switches High CPU Utilization
From the post:
TTY Background
The TTY Background process is a generic process used by all terminal
lines (console, aux, async, and so on).
Normally there should not be any impact on the performance of the
router since this process has a lower priority
compared to the other processes that need to be scheduled by the Cisco
IOS software.
If this process takes high CPU utilization, check whether “logging
synchronous” is configured under “line con 0″.
One possible cause could be CSCdy01705 (registered customers only) .
CSCdy01705 Bug Details
Headline High cpu at process TTY Background
Product all Model
Component os Duplicate of
Severity 3 Severity help Status Resolved Status help
First Found-in Version 12.2(10A) All affected versions
First Fixed-in Version 12.3(1.6), 12.3(1.6)T, 12.2(11)T09, 12.3(2.3)B,
12.2(21), 12.2(21.6), 12.2(21.5)S, 12.2(21.7)S,
12.1(21.3)E04, 12.3(7)XI, 12.2(20)S05, 12.1(21.4)EC, 12.2(1S06,
12.2(15)BC02e Version help
Release Notes
A Cisco router may experience high cpu utilization at process TTY
Background when the command “logging synchronous”
is configured under line con 0.
The possible workaround is to remove the command “logging synchronous”
from line con 0, however, this should only be performed during a scheduled
maintenance window as the router could pause indefinitely just after
removal of the command, possibly requiring a manual reboot of the router.
May 26th, 2009 · No Comments
Using an old switch cisco C3548XL switch the CPU load was increasing gradually over a few months. Looking at the output of show proc the TTY Background process was usings 30-40% CPU load and the system overall was at 80-90%.
This caused some increased ping times, but, switching to the other machines on the switch was fine. Best solution is to schedule some downtime and reboot… also, possibly remove the “logging synchronous” statement under the line con 0 interface.
URL:
TTY Background taking over 60% of CPU???, Cisco
Troubleshooting High CPU Utilization due to Processes – Cisco Systems
Catalyst 3550 Series Switches High CPU Utilization
From the post:
TTY Background
The TTY Background process is a generic process used by all terminal
lines (console, aux, async, and so on).
Normally there should not be any impact on the performance of the
router since this process has a lower priority
compared to the other processes that need to be scheduled by the Cisco
IOS software.
If this process takes high CPU utilization, check whether “logging
synchronous” is configured under “line con 0″.
One possible cause could be CSCdy01705 (registered customers only) .
CSCdy01705 Bug Details
Headline High cpu at process TTY Background
Product all Model
Component os Duplicate of
Severity 3 Severity help Status Resolved Status help
First Found-in Version 12.2(10A) All affected versions
First Fixed-in Version 12.3(1.6), 12.3(1.6)T, 12.2(11)T09, 12.3(2.3)B,
12.2(21), 12.2(21.6), 12.2(21.5)S, 12.2(21.7)S,
12.1(21.3)E04, 12.3(7)XI, 12.2(20)S05, 12.1(21.4)EC, 12.2(1S06,
12.2(15)BC02e Version help
Release Notes
A Cisco router may experience high cpu utilization at process TTY
Background when the command “logging synchronous”
is configured under line con 0.
The possible workaround is to remove the command “logging synchronous”
from line con 0, however, this should only be performed during a scheduled
maintenance window as the router could pause indefinitely just after
removal of the command, possibly requiring a manual reboot of the router.
0 0
- TTY Background causing high CPU load May 26th, 2009 · No Comments Using an old switch cisco C3548XL
- Oracle current high CPU load SQL
- [RabbitMQ] beam.smp high cpu load
- Causing exception while using AlertDialog
- you are using an old unsupported version of gradle 1.9
- CPU Utilization, CPU Load Average, Context Switch Rate
- CPU Utilization, CPU Load Average, Context Switch Rate
- Top coder competition May 26th,2007
- 26th-30th April Summary && 1st-5th May Plan
- May 10th
- 解决方案——Connect to an old database using LocalDB in VS
- 2008 May 26th Monday (五月 二十六日 月曜日)
- May 26th Tuesday (五月 二十六日 火曜日)
- 压力测试衡量CPU的三个指标:CPU Utilization、Load Average和Context Switch Rate
- 压力测试衡量CPU的三个指标:CPU Utilization、Load Average和Context Switch Rate
- 压力测试衡量CPU的三个指标:CPU Utilization、Load Average和Context Switch Rate .
- 压力测试衡量CPU的三个指标:CPU Utilization、Load Average和Context Switch Rate
- 压力测试衡量CPU的三个指标:CPU Utilization、Load Average和Context Switch Rate
- JS判断屏幕分辨率
- NSTimer 使用 绝对超详细(1)
- Morris Traversal方法遍历二叉树(非递归,不用栈,O(1)空间,修改二叉树)
- 那些不能错过的Xcode插件【支持Xcode5.1以上】
- 发布我的高性能纯C#图像处理基本类,顺便也挑战一下极限。:)
- TTY Background causing high CPU load May 26th, 2009 · No Comments Using an old switch cisco C3548XL
- 代理和反向代理
- JavaScript之JSON
- Android加载asset的db
- unix时间戳及Year 2038 problem
- wikioi 两圆的交
- sales_flat_order
- 对图像边缘进行随机均匀采样的C#算法实现
- 极限编程,一次反思