UVa 537 - Artificial Intelligence?

Artificial Intelligence? 

Physics teachers in high school often think that problems given as text are more demanding than pure computations. After all, the pupils have to read and understand the problem first!

So they don't state a problem like ``U=10V, I=5A, P=?" but rather like ``You have an electrical circuit that contains a battery with a voltage of U=10V and a light-bulb. There's an electrical current of I=5A through the bulb. Which power is generated in the bulb?".

However, half of the pupils just don't pay attention to the text anyway. They just extract from the text what is given: U=10V, I=5A. Then they think: ``Which formulae do I know? Ah yes, P=U*I. Therefore P=10V*5A=500W. Finished."

OK, this doesn't always work, so these pupils are usually not the top scorers in physics tests. But at least this simple algorithm is usually good enough to pass the class. (Sad but true.)

Today we will check if a computer can pass a high school physics test. We will concentrate on the P-U-I type problems first. That means, problems in which two of power, voltage and current are given and the third is wanted.

Your job is to write a program that reads such a text problem and solves it according to the simple algorithm given above.

Input 

The first line of the input file will contain the number of test cases.

Each test case will consist of one line containing exactly two data fields and some additional arbitrary words. A data field will be of the form I=xA, U=xV or P=xW, where x is a real number.

Directly before the unit (A, V or W) one of the prefixes m (milli), k (kilo) and M (Mega) may also occur. To summarize it: Data fields adhere to the following grammar:

DataField ::= Concept '=' RealNumber [Prefix] UnitConcept   ::= 'P' | 'U' | 'I'Prefix    ::= 'm' | 'k' | 'M'Unit      ::= 'W' | 'V' | 'A'

Additional assertions:

• The equal sign (`=') will never occur in an other context than within a data field.
• There is no whitespace (tabs,blanks) inside a data field.
• Either P and U, P and I, or U and I will be given.

Output 

For each test case, print three lines:

• a line saying ``Problem #k" where k is the number of the test case
• a line giving the solution (voltage, power or current, dependent on what was given), written without a prefix and with two decimal places as shown in the sample output
• a blank line

Sample Input 

3If the voltage is U=200V and the current is I=4.5A, which power is generated?A light-bulb yields P=100W and the voltage is U=220V. Compute the current, please.bla bla bla lightning strike I=2A bla bla bla P=2.5MW bla bla voltage?

Sample Output 

Problem #1P=900.00WProblem #2I=0.45AProblem #3U=1250000.00V

---

Miguel A. Revilla 
1999-01-11题目有两个难点，一个是字符串的读入，另一个是从字符串中把数字读出
字符串的读入不难，就是有些繁琐
数字读出用库函数的话就会省很多力
我只负责把‘=’后面的数字取出放在字符串number中，然后用库函数atof将number转换为浮点数即可

#include <algorithm>#include <iostream>#include <cstdlib>#include <cstdio>#include <cstring>#include <string>#include <vector>#include <map>#define MAXN 100#define INF 0x7FFFFFFF#define ll long longusing namespace std;int main(void){int n;scanf("%d", &n);getchar();for(int K=1; K<=n; ++K){char ch;string str;scanf("%c", &ch);while(ch != '\n'){str.push_back(ch);scanf("%c", &ch); }str.push_back('\n');double P=0.0, U=0.0, I=0.0;//find parameters P, U, I.int flagp = 0, flagu = 0, flagi = 0;//表示对应参数是否被赋值 int equal = 0;//表示等号出现的次数 for(int i=1; equal<2; ++i){if(str[i] == '='){equal++;if(str[i-1] == 'P'){flagp = 1;char number[MAXN];int j = i+1;int flag = 0;while(!isalpha(str[j])){number[flag++] = str[j++];}number[flag] = '\n';P = atof(number);if(str[j] == 'm'){P /= 1000.0;}else if(str[j] == 'k'){P *= 1000.0;}else if(str[j] == 'M'){P *= 1000000.0;}}else if(str[i-1] == 'U'){flagu = 1;char number[MAXN];int j = i+1;int flag = 0;while(!isalpha(str[j])){number[flag++] = str[j++];}number[flag] = '\n';U = atof(number);if(str[j] == 'm'){U /= 1000.0;}else if(str[j] == 'k'){U *= 1000.0;}else if(str[j] == 'M'){U *= 1000000.0;}}else if(str[i-1] == 'I'){flagi = 1;char number[MAXN];int j = i+1;int flag = 0;while(!isalpha(str[j])){number[flag++] = str[j++];}number[flag] = '\n';I = atof(number);if(str[j] == 'm'){I /= 1000.0;}else if(str[j] == 'k'){I *= 1000.0;}else if(str[j] == 'M'){I *= 1000000.0;}}}} cout << "Problem #" << K << endl;if(!flagp){printf("P=%.2lfW\n\n", U*I);}else if(!flagu){printf("U=%.2lfV\n\n", P/I);}else{printf("I=%.2lfA\n\n", P/U);}}return 0;}