Cocos2d-x里面如何实现MVC(五)
来源:互联网 发布:net反编译成源码 编辑:程序博客网 时间:2024/06/07 04:00
本文基于前面两篇文章,如果您还没有看过,建议先阅读下面两篇文章:
· cocos2d-x里面如何实现mvc(三)
· cocos2d-x里面如何实现mvc(四)
更新Model
当用户从工具箱中选一个小工具,然后把它放置到game board上面去时,我们需要编码响应这些事件。在上一篇文章中,我们已经实现了GameBoardViewDelegate的touchedAtRow方法。我们还需要给这个协议再添加一个接口方法。如下所示:
class
GameBoardViewDelegate
{
public
:
virtual
void
touchAtGrid(GameBoard *gameBoard,
int
row,
int
column) = 0;
virtual
void
touchWithToolBoxItemAtIndex(GameBoard *gameBoard,
int
index) = 0;
};
我们需要修改touch事件处理器,这样就可以判断我们到底是触摸了工具箱还是game board。
void
GameBoardView::ccTouchesBegan(CCSet *pTouches, CCEvent *pEvent)
{
CCTouch *touch = (CCTouch*) pTouches->anyObject();
if
(touch == NULL)
return
;
// 置换坐标,等效如下
//CCPoint location = touch->locationInView(touch->view());
//location = CCDirector::sharedDirector()->convertToGL(location);
CCPoint point =
this
->convertTouchToNodeSpace(touch);
// 下面假设游戏区与工具区8:2来划分宽度
CCSize size = CCDirector::sharedDirector()->getWinSize();
CCRect *gameBoardRectangle =
new
CCRect(0, 0, size.width*0.8, size.height);
CCRect *toolBoxRectangle =
new
CCRect(size.width*0.8, 0, size.width*0.2, size.height);
if
(CCRect::CCRectContainsPoint(*gameBoardRectangle, point)){
// calculate row and column touched by the user and call a delegate method
int
row = 0;
int
column = 0;
// ...
this
->gameBoardViewDelegate->touchAtGrid(gameBoard, row, column);
}
else
if
(CCRect::CCRectContainsPoint(*toolBoxRectangle, point)){
int
index = 0;
// calculate toolbox item index based on a touch coordinate
this
->gameBoardViewDelegate->touchWithToolBoxItemAtIndex(gameBoard, index);
}
}
在controller类里面处理touch事件是非常简单的,我们只需要持有一个model的引用,然后基于touch事件来调用model的方法就行了。我们的接口看起来和下面差不多,只是省略掉了一些实现细节:
class
GameBoard :
public
CCObject
{
public
:
// ...
GamePiece* getGamePieceFromToolBoxItemAtIndex(
int
index);
public
:
// ...
int
selectedToolBoxItemIndex;
};
然后,我们在GameBoardController里面完全实现GameBoardViewDelegate的两个方法。
void
GameBoardController::touchAtGrid(GameBoard *gameBoard,
int
row,
int
column)
{
// if the toolbox item is selected move item from toolbox to game board
if
(gameBoard->selectedToolBoxItemIndex != -1){
GamePiece *gamePiece = gameBoard->getGamePieceFromToolBoxItemAtIndex(gameBoard->selectedToolBoxItemIndex);
gameBoard->putGamePiece(gamePiece, row, column);
}
}
void
GameBoardController::touchWithToolBoxItemAtIndex(GameBoard *gameBoard,
int
index) {
// keep the toolbox selection state in the Model
gameBoard->selectedToolboxItemIndex = index;
}
到目前为止,我们实现了,用户可以点击工具箱中的小工具,然后把它们放置到game board中的一个小方块上面,同时model类在中间起了桥梁作用。
通知view关于model的改变
为了在view里面反映出model的状态更改,我们可以在model有变化的时候给view发送通知消息,然后view就可以根据不同的消息来作出不同的响应了。和我们在实现view通过controller一样,这里我们也定义了一个GameBoardDelegate,用来通知view model的变化。
class
GameBoardDelegate
{
public
:
virtual
void
didPutGamePiece(GamePiece *gamePiece,
int
row,
int
column) = 0;
};
class
GameBoard :
public
CCObject
{
// ...
public
:
void
setGameBoardDelegate(GameBoardDelegate *aGameBoardDelegate);
private
:
GameBoardDelegate *gameBoardDelegate;
};
void
GameBoard::putGamePiece(GamePiece *gamePiece,
int
row,
int
column)
{
// ...
// store game piece
// notify that the game piece was put on a gameboard
this
->gameBoardDelegate->didPutGamePiece(gamePiece, row, column);
}
void
GameBoard::setGameBoardDelegate(GameBoardDelegate *aGameBoardDelegate)
{
this
->gameBoardDelegate = aGameBoardDelegate;
}
在GameBoardView里面实现GameBoardDelegate的时候,当我们需要在game board上面放置一个小工具的时候,我们定义了一个CCSprite。
class
GameBoardView :
public
CCLayer,
public
GameBoardDelegate
{
// ...
};
void
GameBoardView::initWithGameBoard(GameBoard *aGameBoard, GameBoardViewDelegate *aDelegate)
{
// ...
this
->gameBoard = aGameBoard;
this
->gameBoard->retain();
this
->gameBoard->setGameBoardDelegate(
this
);
this
->gameBoardViewDelegate = aDelegate;
// ...
}
void
GameBoardView::didPutGamePiece(GamePiece *gamePiece,
int
row,
int
column)
{
// create CCSprite and put it on a game board at corresponding position
CCSprite *gamePieceSprite = CCSprite::spriteWithFile(
"CloseNormal.png"
);
// ...
this
->addChild(gamePieceSprite, 1);
}
总结
现在框架中所有的部分都联系起来了,model、view和controller三者组成了著名的MVC模式
· View接收touch事件,然后把事件传递给controller,
· Controller 响应用户的touch事件,然后更新model
· model 更新它自身的状态, 处理游戏逻辑,然后告诉view它改变了哪些东西。
· View则基于Model当前的状态来更新自己的显示
- Cocos2d-x里面如何实现MVC(五)
- Cocos2d-x里面如何实现MVC(五)
- Cocos2d-x里面如何实现MVC(五)
- Cocos2d-x里面如何实现MVC(六)
- Cocos2d-x里面如何实现MVC(四)
- Cocos2d-x里面如何实现MVC(三)
- Cocos2d-x里面如何实现MVC(二)
- Cocos2d-x里面如何实现MVC(一)
- Cocos2d-x里面如何实现MVC(一)
- Cocos2d-x里面如何实现MVC(二)
- Cocos2d-x里面如何实现MVC(三)
- Cocos2d-x里面如何实现MVC(四)
- Cocos2d-x里面如何实现MVC(六)
- Cocos2d-x里面如何实现MVC(完)
- cocos2d-x里面如何实现mvc
- Cocos2d-x里面如何实现MVC(一)
- Cocos2d-x里面如何实现MVC(二)
- Cocos2d-x里面如何实现MVC(三)
- NYOJ-220-推桌子
- Cocos2d-x里面如何实现MVC(四)
- java接口用法:向上转型和回调函数
- 操作系统面试题(二)
- Vector、ArrayList
- Cocos2d-x里面如何实现MVC(五)
- Cocos2d-x里面如何实现MVC(六)
- python与json
- java基础__代理、动态代理
- Cocos2d-x里面如何实现MVC(完)
- sql server参考
- ZOJ 1103 Hike on a Graph(BFS)
- 贪心算法之克鲁斯卡尔算法
- cocos2d-x里面如何实现mvc