Solari8终端安装 |
1、开机上电,等待显示器亮后,sun自己的键盘按Stop-a键。否则按Ctrl-Break键。 |
这时,服务器进入OK监控状态: |
OK |
2、将solaris8系统盘Software 1/2插入DVD/CD-ROM,并在OK提示符下输入以下命令: |
OK boot cdrom |
这时,服务器从光盘上开始引导系统 |
3、等待一会,,系统出现如下提示: |
Select a Language |
0. English |
1. French |
2. German |
3. Italian |
4. Japanese |
5. Korean |
6. Simplified Chinese |
7. Spanish |
8. Swedish |
9. Traditional Chinese |
Please make a choice (0 - 9), or press h or ? for help: |
这是选择语言,请注意,在这里一定要选择 0. English |
输入0后按回车键; |
|
4、出现如下提示: |
Select a Locale |
0. English (C - 7-bit ASCII) |
1. Albania (ISO8859-2) |
2. Australia (ISO8859-1) |
3. Belgium-Flemish (ISO8859-1) |
4. Belgium-Flemish (ISO8859-15 - Euro) |
5. Bosnia (ISO8859-2) |
6. Brazil (ISO8859-1) |
7. Brazil (UTF-8) |
8. Bulgaria (ISO8859-5) |
9. Canada-English (ISO8859-1) |
10. Catalan, Spain (ISO8859-1) |
11. Catalan, Spain (ISO8859-15 - Euro) |
12. Croatia (ISO8859-2) |
13. Czech Republic (ISO8859-2) |
14. Denmark (ISO8859-1) |
15. Denmark (ISO8859-15 - Euro) |
16. Egypt (ISO8859-6) |
17. Egypt (UTF-8) |
18. Estonia (ISO8859-15) |
Press Return to show more choices. |
Please make a choice (0 - 59), or press h or ? for help: |
这是选择本地语言,请注意,在这里一定要选择0. English (C - 7-bit ASCII) |
输入0后按回车键; |
5、如果服务器接了键盘和显示器,跳过这一步;如果是在终端上安装solaris8,这时会出现如下提示: |
What type of terminal are you using? |
1) ANSI Standard CRT |
2) DEC VT52 |
3) DEC VT100 |
4) Heathkit 19 |
5) Lear Siegler ADM31 |
6) PC Console |
7) Sun Command Tool |
8) Sun Workstation |
9) Televideo 910 |
10) Televideo 925 |
11) Wyse Model 50 |
12) X Terminal Emulator (xterms) |
13) CDE Terminal Emulator (dtterm) |
14) Other |
Type the number of your choice and press Return: |
这是选择终端类型,我们选择 3) DEC VT100 |
输入3后按回车键; |
6、出现如下提示: |
q The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
The Solaris installation program is divided into a series of short sections |
where you'll be prompted to provide information for the installation. At |
the end of each section, you'll be able to change the selections you've |
made before continuing. |
About navigation... |
- The mouse cannot be used |
- If your keyboard does not have function keys, or they do not |
respond, press ESC; the legend at the bottom of the screen |
will change to show the ESC keys to use for navigation. |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
该提示告诉安装人员,Solaris的安装分为好几部分,每一部分后面都需要你进行确认,如果发现 |
有错,可以更改你先前输入的信息 |
按F2键继续安装; |
7、出现如下提示: |
q Identify This System qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On the next screens, you must identify this system as networked or |
non-networked, and set the default time zone and date/time. |
If this system is networked, the software will try to find the information |
it needs to identify your system; you will be prompted to supply any |
information it cannot find. |
> To begin identifying this system, press F2. |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
该提示告诉安装人员,要开始定义系统的名字,网络及掩码,时区及时间 |
按F2键继续安装; |
|
8、出现如下提示: |
q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Specify Yes if the system is connected to the network by one of the Solaris |
or vendor network/communication Ethernet cards that are supported on the |
Solaris CD. See your hardware documentation for the current list of |
supported cards. |
Specify No if the system is connected to a network/communication card that |
is not supported on the Solaris CD, and follow the instructions listed under |
Help. |
|
Networked |
qqqqqqqqq |
[X] Yes |
[ ] No |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
安装程序提示系统是否连接了网络?使用上下箭头键移动,在合适的位置停止后,按空格键, |
选中该选项; |
在我们的安装中,需要网络功能,因此按F2键继续安装; |
9、出现如下提示: |
q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must specify whether or not this system should use DHCP |
for network interface configuration. Choose Yes if DHCP is to be used, or |
No if the interfaces are to be configured manually. |
NOTE: DHCP support will not be enabled, if selected, until after the system |
reboots. |
Use DHCP |
qqqqqqqq |
[ ] Yes |
[X] No |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示是否需要使用DHCP来配置主机的IP地址; |
在我们的安装中,不使用DHCP功能,因此按F2键继续安装; |
10、出现提示: |
q Primary Network Interface qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must specify which of the following network adapters is |
the system's primary network interface. Usually the correct choice is the |
lowest number. However, do not guess; ask your system administrator if |
you're not sure. |
> To make a selection, use the arrow keys to highlight the option and |
press Return to mark it [X]. |
|
Primary network interface |
qqqqqqqqqqqqqqqqqqqqqqqqq |
[X] ce0 |
[ ] ge0 |
[ ] eri0 |
[ ] fcip0 |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
选择主网卡(Primary Network Interface) |
在我们的安装例子中,使用上下箭头键移动光标,移动到eri0处,按空格键选中该网卡, |
按F2键继续安装; |
11、出现提示: |
q Host Name qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must enter your host name, which identifies this system |
on the network. The name must be unique within your domain; creating a |
duplicate host name will cause problems on the network after you install |
Solaris. |
A host name must be at least two characters; it can contain letters, digits, |
and minus signs (-). |
|
Host name:rac1 |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
输入主机名,本例中,我们输入主机名rac1后按F2键继续安装; |
12、出现提示: |
q IP Address qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must enter the Internet Protocol (IP) address for this |
system. It must be unique and follow your site's address conventions, or a |
system/network failure could result. |
IP addresses contain four sets of numbers separated by periods (for example |
129.200.9.1). |
|
IP address:192.168.0.1 |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示输入主机的IP地址,本例中,输入192.168.0.1后按F2键继续安装; |
13、出现提示: |
q Subnets qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must specify whether this system is part of a subnet. If |
you specify incorrectly, the system will have problems communicating on the |
network after you reboot. |
> To make a selection, use the arrow keys to highlight the option and |
press Return to mark it [X]. |
|
System part of a subnet |
qqqqqqqqqqqqqqqqqqqqqqq |
[X] Yes |
[ ] No |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示主机的网络是否采用子网掩码的方法,本例中,要采用子网掩码的方法,因此按F2键继续安装; |
14、出现提示: |
q Netmask qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must specify the netmask of your subnet. A default |
netmask is shown; do not accept the default unless you are sure it is |
correct for your subnet. A netmask must contain four sets of numbers |
separated by periods (for example 255.255.255.0). |
|
Netmask: 255.255.255.0 |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示你输入主机的子网掩码,本例中,输入255.255.255.0后,按F2键继续安装; |
15、出现提示: |
q IPv6 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you should specify whether or not IPv6, the next generation |
Internet Protocol, will be enabled on this machine. Enabling IPv6 will have |
no effect if this machine is not on a network that provides IPv6 service. |
IPv4 service will not be affected if IPv6 is enabled. |
> To make a selection, use the arrow keys to highlight the option and |
press Return to mark it [X]. |
|
Enable IPv6 |
qqqqqqqqqqq |
[ ] Yes |
[X] No |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示你是否采用IPv6技术?本例中,不采用IPv6技术,按F2键继续安装; |
16、等待一会,出现提示: |
q Set the Default Route qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
To specify the default route, you can let the software try to detect one |
upon reboot, you can specify the IP address of the router, or you can choose |
None. Choose None if you do not have a router on your subnet. |
> To make a selection, use the arrow keys to select your choice and press |
Return to mark it [X]. |
|
Default Route |
qqqqqqqqqqqqqqqqqqqqqqqqqq |
[X] Detect one upon reboot |
[ ] Specify one |
[ ] None |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
提示你设置缺省网关,本例中,我们选择None,现在不设置缺省网关,以后在设置,使用上下 |
箭头,移动光标到[ ] None位置后,按空格键选中,然后按F2键继续安装; |
17、出现如下提示: |
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> Confirm the following information. If it is correct, press F2; |
to change any information, press F4. |
|
Networked: Yes |
Use DHCP: No |
Primary network interface: ce0 |
Host name: rac1 |
IP address: 192.168.0.1 |
System part of a subnet: Yes |
Netmask: 255.255.255.0 |
Enable IPv6: No |
Default Route: None |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F4_Change F6_Help |
提示你确认上面输入的信息,如果上述的输入信息有错,可以按F4键后重新输入;如果正确, |
按F2键后继续安装; |
18、出现提示: |
q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Specify Yes if the system will use the Kerberos security mechanism. |
Specify No if this system will use standard UNIX security. |
Configure Kerberos Security |
qqqqqqqqqqqqqqqqqqqqqqqqqqq |
[ ] Yes |
[X] No |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
配置安全策略,本例中,我们选择No,因此按F2键继续安装; |
19、出现提示: |
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> Confirm the following information. If it is correct, press F2; |
to change any information, press F4. |
|
Configure Kerberos Security: No |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F4_Change F6_Help |
确认刚才输入的信息,如果刚才输入的信息有错,按F4键重新输入;如果正确,按F2键继续安装; |
|
20、出现提示: |
q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must provide name service information. Select the name |
service that will be used by this system, or None if your system will either |
not use a name service at all, or if it will use a name service not listed |
here. |
> To make a selection, use the arrow keys to highlight the option |
and press Return to mark it [X]. |
|
Name service |
qqqqqqqqqqqq |
[X] NIS+ |
[ ] NIS |
[ ] DNS |
[ ] LDAP |
[ ] None |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
配置名字服务,本例中,我们选择None(不采用任何名字服务)。使用上下箭头移动光标到 |
None后,按空格键,选中该选项,按F2键继续安装; |
21、出现提示: |
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> Confirm the following information. If it is correct, press F2; |
to change any information, press F4. |
|
Name service: None |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F4_Change F6_Help |
确认刚才输入的信息,如果刚才输入的信息有错,按F4键重新输入;如果正确,按F2键继续安装; |
22、出现提示: |
q Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must specify your default time zone. You can specify a |
time zone in three ways: select one of the continents or oceans from the |
list, select other - offset from GMT, or other - specify time zone file. |
> To make a selection, use the arrow keys to highlight the option and |
press Return to mark it [X]. |
|
Continents and Oceans |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
- [ ] Africa |
x [ ] Americas |
x [ ] Antarctica |
x [ ] Arctic Ocean |
x [ ] Asia |
x [ ] Atlantic Ocean |
x [ ] Australia |
x [ ] Europe |
v [ ] Indian Ocean |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
设置时区,使用上下箭头移动光标到Asia后,按空格键,选中该选项,按F2键继续安装; |
|
23、出现提示: |
q Country or Region qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> To make a selection, use the arrow keys to highlight the option and |
press Return to mark it [X]. |
|
Countries and Regions |
qqqqqqqqqqqqqqqqqqqqqqqq |
- [ ] Afghanistan |
x [ ] Armenia |
x [ ] Azerbaijan |
x [ ] Bahrain |
x [ ] Bangladesh |
x [ ] Bhutan |
x [ ] Brunei |
x [ ] Cambodia |
x [ ] China |
x [ ] Cyprus |
x [ ] East Timor |
x [ ] Georgia |
v [ ] Hong Kong |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
择国家或地区,使用上下箭头移动光标到China后,按空格键,选中该选项,按F2键继续安装; |
24、出现提示: |
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
q Date and Time qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> Accept the default date and time or enter |
new values. |
Date and time: 2003-08-18 10:36 |
Year (4 digits) : 2003 |
Month (1-12) : 08 |
Day (1-31) : 18 |
Hour (0-23) : 10 |
Minute (0-59) : 36 |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F6_Help |
设置时间。本例中,我们不在此设置时间,安装结束后,使用data命令修改时间。按F2键继续安装; |
25、出现提示: |
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
> Confirm the following information. If it is correct, press F2; |
to change any information, press F4. |
|
Time zone: PRC |
Date and time: 2003-08-18 10:36:00 |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F4_Change F6_Help |
确认刚才输入的信息,如果刚才输入的信息有错,按F4键重新输入;如果正确,按F2键继续安装; |
26、等待一会,出现提示: |
q Solaris Interactive Installation qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
You'll be using the initial option for installing Solaris software on the |
system. The initial option overwrites the system disks when the new Solaris |
software is installed. |
On the following screens, you can accept the defaults or you can customize |
how Solaris software will be installed by: |
- Selecting the type of Solaris software to install |
- Selecting disks to hold software you've selected |
- Specifying how file systems are laid out on the disks |
After completing these tasks, a summary of your selections (called a |
profile) will be displayed. |
There are two ways to install your Solaris software: |
- "Standard" installs your system from a standard Solaris Distribution. |
- "Flash" installs your system from one or more Flash Archives. |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Standard F4_Flash F5_Exit F6_Help |
选择Standard install:按F2键,继续安装; |
27、等待一会,出现提示: |
q Select Geographic Regions qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Select the geographic regions for which support should be installed. |
> [ ] Australasia |
> [ ] Central America |
> [ ] South America |
> [ ] Northern Africa |
> [ ] Middle East |
> [ ] Eastern Europe |
> [ ] Northern Europe |
> [ ] Western Europe |
> [ ] Central Europe |
> [ ] Southern Europe |
> [ ] North America |
> [ ] Asia |
Move left, right, up, down using the arrow keys |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F5_Exit F6_Help |
选择地理区域,本例中,选择Asia:使用上下箭头移动光标到Asia处,按回车键后,出现展 |
开的提示: |
V [ ] Asia |
[ ] Hindi UTF-8 |
[ ] Japanese EUC (ja) |
[ ] Japanese PC Kanji (ja_JP.PCK) |
[ ] Japanese UTF-8 (ja_JP.UTF-8) |
[ ] Korean EUC |
[ ] Korean UTF-8 |
[x] Simplified Chinese EUC |
[x] Simplified Chinese GB18030 |
[x] Simplified Chinese GBK |
[x] Simplified Chinese UTF-8 |
[ ] Thai TIS620 |
[ ] Thai UTF-8 |
[x] Traditional Chinese (Hong Kong) BIG5+HKSCS |
[x] Traditional Chinese (Hong Kong) UTF-8 |
[x] Traditional Chinese BIG5 |
[x] Traditional Chinese EUC |
[x] Traditional Chinese UTF-8 |
使用上下左右箭头移动光标到所有中文Chinese处,按空格键选中语言后,按F2键继续安装; |
28、出现提示: |
q Select Software qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Select the Solaris software to install on the system. |
NOTE: After selecting a software group, you can add or remove software by |
customizing it. However, this requires understanding of software |
dependencies and how Solaris software is packaged. The software groups |
displaying 64-bit contain 64-bit support. |
[ ] Entire Distribution plus OEM support 64-bit 2732.00 MB |
[X] Entire Distribution 64-bit ................. 2698.00 MB |
[ ] Developer System Support 64-bit ............ 2366.00 MB |
[ ] End User System Support 64-bit ............. 1864.00 MB |
[ ] Core System Support 64-bit ................. 861.00 MB |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help |
选择 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB:使用上下箭头 |
将光标移动到 [ ] Entire Distribution plus OEM support 64-bit 2732.00 MB处,按 |
空格键后,按F2键继续安装; |
29、出现提示: |
q Select Disks qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must select the disks for installing Solaris software. |
Start by looking at the Suggested Minimum field; this value is the |
approximate space needed to install the software you've selected. Keep |
selecting disks until the Total Selected value exceeds the Suggested Minimum |
value. |
Disk Device (Size) Available Space |
============================================= |
[ ] c1t0d0 (69994 MB) 69994 MB |
Total Selected: 0 MB |
Suggested Minimum: 1919 MB |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Edit F5_Exit F6_Help |
选择磁盘:按空格键,选中磁盘后,按F2键继续安装; |
|
30、出现提示: |
q Preserve Data? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Do you want to preserve existing data? At least one of the disks you've |
selected for installing Solaris software has file systems or unnamed slices |
that you may want to save. |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Preserve F5_Exit F6_Help |
提示是否保存数据,本例中,不保存,按F2继续安装; |
31、出现提示: |
q Automatically Layout File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Do you want to use auto-layout to automatically layout file systems? |
Manually laying out file systems requires advanced system administration |
skills. |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Auto Layout F3_Go Back F4_Manual Layout F5_Exit F6_Help |
提示是否采用自动布局文件系统:本例中,我们采用自动布局文件系统,所以按F2键继续安装; |
32、出现提示: |
q Automatically Layout File Systems qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
On this screen you must select all the file systems you want auto-layout to |
create, or accept the default file systems shown. |
NOTE: For small disks, it may be necessary for auto-layout to break up some |
of the file systems you request into smaller file systems to fit the |
available disk space. So, after auto-layout completes, you may find file |
systems in the layout that you did not select from the list below. |
File Systems for Auto-layout |
======================================== |
[X] / |
[ ] /opt |
[ ] /usr |
[ ] /usr/openwin |
[ ] /var |
[X] swap |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F5_Cancel F6_Help |
选中以下几项: |
[X] / |
[X] /opt |
[X] /usr |
[ ] /usr/openwin(不选) |
[X] /var |
[X] swap |
然后按F2键继续安装; |
33、出现提示: |
q File System and Disk Layout qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
The summary below is your current file system and disk layout, based on the |
information you've supplied. |
NOTE: If you choose to customize, you should understand file systems, their |
intended purpose on the disk, and how changing them may affect the operation |
of the system. |
File system/Mount point Disk/Slice Size |
============================================================= |
/ c1t0d0s0 144 MB |
/var c1t0d0s1 74 MB |
overlap c1t0d0s2 69994 MB |
swap c1t0d0s3 516 MB |
/opt c1t0d0s5 34 MB |
/usr c1t0d0s6 2126 MB |
/export/home c1t0d0s7 67098 MB |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help |
由于系统缺省的分区大小不合理,因此按F4,修改分区大小,出现如下提示: |
q Customize Disk: c1t0d0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Boot Device: c1t0d0s0 |
Entry: / Recommended: 110 MB Minimum: 95 MB |
================================================================================ |
Slice Mount Point Size (MB) |
0 / 144 |
1 /var 74 |
2 overlap 69994 |
3 swap 516 |
4 0 |
5 /opt 34 |
6 /usr 2126 |
7 /export/home 67098 |
================================================================================ |
Capacity: 69994 MB |
Allocated: 69992 MB |
Rounding Error: 2 MB |
Free: 0 MB |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_OK F4_Options F5_Cancel F6_Help |
修改前,删除Slice 7那一行的所有信息(7 /export/home 67098)。 |
使用Tab键或上下左右键,移动光标到Slice 7处,删除该行。然后将分区修改为如下: |
Entry: Recommended: MB Minimum: MB |
================================================================================ |
Slice Mount Point Size (MB) |
0 / 4099 |
1 /var 4099 |
2 overlap 69994 |
3 swap 16386 |
4 0 |
5 /opt 10240 |
6 /usr 10240 |
7 0 |
================================================================================ |
Capacity: 69994 MB |
Allocated: 45064 MB |
Rounding Error: 2 MB |
Free: 24928 MB |
按F2键继续安装; |
34、出现如下提示: |
q File System and Disk Layout qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
The summary below is your current file system and disk layout, based on the |
information you've supplied. |
NOTE: If you choose to customize, you should understand file systems, their |
intended purpose on the disk, and how changing them may affect the operation |
of the system. |
File system/Mount point Disk/Slice Size |
============================================================= |
/ c1t0d0s0 4099 MB |
/var c1t0d0s1 4099 MB |
overlap c1t0d0s2 69994 MB |
swap c1t0d0s3 16386 MB |
/opt c1t0d0s5 10240 MB |
/usr c1t0d0s6 10240 MB |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help |
按F2继续安装; |
35、出现如下提示: |
q Mount Remote File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
Do you want to mount software from a remote file server? This may be |
necessary if you had to remove software because of disk space problems. |
|
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F3_Go Back F4_Remote Mounts F5_Exit F6_Help |
按F2继续安装; |
36、出现如下提示: |
q Profile qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
The information shown below is your profile for installing Solaris software. |
It reflects the choices you've made on previous screens. |
============================================================================ |
- Installation Option: Initial |
x Boot Device: c1t0d0 |
x Client Services: None |
x |
x Locales: Simplified Chinese EUC |
x Simplified Chinese GB18030 |
x Simplified Chinese GBK |
x Simplified Chinese UTF-8 |
x Traditional Chinese (Hong Kong) BIG |
x Traditional Chinese (Hong Kong) UTF |
x Traditional Chinese BIG5 |
x Traditional Chinese EUC |
x Traditional Chinese UTF-8 |
v |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Continue F4_Change F5_Exit F6_Help |
按F2继续安装; |
37、出现如下提示: |
q Warning qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
|
The following disk configuration condition(s) have been |
detected. Errors must be fixed to ensure a successful |
installation. Warnings can be ignored without causing the |
installation to fail. |
WARNING: Unused disk space (c1t0d0) |
WARNING: CHANGING DEFAULT BOOT DEVICE |
You have either explicitly changed the default boot device, or |
accepted the default to "Reconfigure EEPROM". In either case, |
the system's EEPROM will be changed so it will always boot |
Solaris from the device that you've specified. If this is not |
what you had in mind, go back to the disk selection screens and |
change the "Reconfigure EEPROM" setting. |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_OK F5_Cancel |
按F2继续安装; |
38、出现如下提示: |
q Reboot After Installation? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
After Solaris software is installed, the system must be rebooted. You can |
choose to have the system automatically reboot, or you can choose to |
manually reboot the system if you want to run scripts or do other |
customizations before the reboot. You can manually reboot a system by using |
the reboot(1M) command. |
|
[X] Auto Reboot |
[ ] Manual Reboot |
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq |
F2_Begin Installation F5_Cancel |
设置安装结束后,自动重启动。按F2继续安装; |
39、出现如下提示: |
Preparing system for Solaris install |
Configuring disk (c1t0d0) |
- Creating Solaris disk label (VTOC) |
Creating and checking UFS file systems |
- Creating / (c1t0d0s0) |
- Creating /var (c1t0d0s1) |
- Creating /opt (c1t0d0s5) |
- Creating /usr (c1t0d0s6) |
Solaris Initial Install |
|
MBytes Installed: 52.22 |
MBytes Remaining: 1528.16 |
Installing: Core Solaris Devices |
|
| |
| | | | | | |
0 20 40 60 80 100 |
(正在安装Solaris Software 1/2 CD盘,请等待) |
|
Solaris 8 software installation partially failed |
Solaris 8 packages partially installed |
SUNWidecr |
Customizing system files |
- Mount points table (/etc/vfstab) |
- Network host addresses (/etc/hosts) |
Cleaning devices |
Customizing system devices |
- Physical devices (/devices) |
- Logical devices (/dev) |
Installing boot information |
- Installing boot blocks (c1t0d0s0) |
- Updating system firmware for automatic rebooting |
Installation log location |
- /a/var/sadm/system/logs/install_log (before reboot) |
- /var/sadm/system/logs/install_log (after reboot) |
Install of CD 1 complete. The system will ask you for CD 2 after you reboot. |
Executing SolStart postinstall phase... |
Executing finish script "patch_finish"... |
|
Finish script patch_finish execution completed. |
Executing JumpStart postinstall phase... |
The begin script log 'begin.log' |
is located in /var/sadm/system/logs after reboot. |
The finish script log 'finish.log' |
is located in /var/sadm/system/logs after reboot. |
syncing file systems... done |
rebooting... |
Resetting ... |
|
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 *** |
|
*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 *** |
|
Sun Fire 880, No Keyboard |
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved. |
OpenBoot 4.7.5, 4096 MB memory installed, Serial #53419230. |
Ethernet address 0:3:ba:2f:1c:de, Host ID: 832f1cde. |
Rebooting with command: boot |
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01042dc11,0:a File an |
d args: |
SunOS Release 5.9 Version Generic_112233-03 64-bit |
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved. |
Use is subject to license terms. |
configuring IPv4 interfaces: ce0. |
Hostname: rac2 |
Configuring /dev and /devices |
Configuring the /dev directory (compatibility devices) |
The system is coming up. Please wait. |
checking ufs filesystems |
/dev/rdsk/c1t0d0s5: is clean. |
Configuring network interface addresses: ce0 eri0 ge0. |
starting rpc services: rpcbind done. |
On this screen you can create a root password. |
A root password can contain any number of characters, but only the first eight |
characters in the password are significant. (For example, if you create |
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root |
access.) |
You will be prompted to type the root password twice; for security, the password |
will not be displayed on the screen as you type it. |
> If you do not want a root password, press RETURN twice. |
Root password: |
|
Press Return to continue. |
40、系统提示你设置超级用户root的密码,本例中,输入root123后,出现如下提示: |
On this screen you can create a root password. |
A root password can contain any number of characters, but only the first eight |
characters in the password are significant. (For example, if you create |
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root |
access.) |
You will be prompted to type the root password twice; for security, the password |
will not be displayed on the screen as you type it. |
> If you do not want a root password, press RETURN twice. |
Root password: |
|
Re-enter your root password. |
|
Press Return to continue. |
41、系统提示你再次输入超级用户root的密码,本例中,再次输入root123,出现如下提示: |
System identification is completed. |
Setting netmask of ce0 to 255.255.255.0 |
Setting default IPv4 interface for multicast: add net 224.0/4: gateway rac2 |
syslog service starting. |
Aug 18 11:31:00 rac2 sendmail[369]: My unqualified host name (rac2) unknown; sle |
eping for retry |
Aug 18 11:32:00 rac2 sendmail[369]: unable to qualify my own domain name (rac2) |
-- using short name |
WARNING: local host name (rac2) is not qualified; fix $j in config file |
/etc/mail/aliases: 12 aliases, longest 10 bytes, 138 bytes total |
Starting Web Start Launcher in Command Line Mode. |
Please specify the media from which you will install Solaris 8 Software 2 of 2 |
(12/02 SPARC Platform Edition). |
Alternatively, choose the selection for "Skip" to skip this disc and go on to |
the next one. |
Media: |
1. CD/DVD |
2. Network File System |
3. Skip |
Media [1]: |
42、提示你插入Solaris 8 Software 2/2 CD光盘。敲回车键,光盘弹出,并出现如下提示符: |
Please insert the CD/DVD for Solaris 8 Software 2 of 2 (12/02 SPARC Platform |
Edition). |
After you insert the disc, please press Enter. |
Enter S to skip this disc and go on to the next one. |
To select a different media, enter B to go Back. |
[] |
43、将Solaris 8 Software 2/2 CD光盘插入CD-ROM,等待一会(大约15秒)后,按回车键继续安装; |
Reading Solaris 8 Software 2 of 2 (12/02 SPARC Platform Edition).... - |
Launching installer for Solaris 8 Software 2 of 2 (12/02 SPARC Platform |
Edition). Please Wait... |
Installing Solaris 8 packages (part 2) |
(等待安装Solaris 8 Software 2/2光盘) |
|-1%--------------25%-----------------50%-----------------75%--------------100%| |
|
Installation details: |
Product Result More Info |
1. Solaris 8 packages (part 2) Installed Available |
2. Done |
Enter the number corresponding to the desired selection for more |
information, or enter 2 to continue [2]: |
44、提示你Solaris 8 Software 2/2 CD光盘已经安装完毕,敲回车键出现提示: |
Please specify the media from which you will install Solaris 8 Languages (12/02 |
SPARC Platform Edition). |
Alternatively, choose the selection for "Skip" to skip this disc and go on to |
the next one. |
Media: |
1. CD/DVD |
2. Network File System |
3. Skip |
Media [1]: |
45、敲回车键,弹出光盘,出现如下提示: |
Please insert the CD/DVD for Solaris 8 Languages (12/02 SPARC Platform Edition). |
After you insert the disc, please press Enter. |
Enter S to skip this disc and go on to the next one. |
To select a different media, enter B to go Back. |
[] |
提示你将Solaris Languages光盘放入CD-ROM中; |
46、将Solaris Languages光盘放入后等待15秒左右,然后敲回车键, |
出现如下提示: |
Reading Solaris 8 Languages (12/02 SPARC Platform Edition).... - |
Launching installer for Solaris 8 Languages (12/02 SPARC Platform Edition). |
Please Wait... |
The following items will be installed: |
Product: Solaris 8 Simplified Chinese Localization |
Location: /usr |
Size: 131.0 MB |
-------------------------------------------------- |
Solaris 8 Simplified Chinese EUC Localization 3.2 MB |
Solaris 8 Simplified Chinese Common Localization 125.1 MB |
SunOS 4.x Asian Compatibility Localization 4 KB |
Asian User Defined Character Tool for CDE 2.7 MB |
Product: Solaris 8 Traditional Chinese Localization |
Location: /usr |
Size: 101.5 MB |
--------------------------------------------------- |
Solaris 8 Traditional Chinese Common Localization 71.9 MB |
Solaris 8 Traditional Chinese Localization 29.6 MB |
SunOS 4.x Asian Compatibility Localization 4 KB |
Asian User Defined Character Tool for CDE 2.7 MB |
Product: Solaris 8 Hong Kong Traditional Chinese Localization |
Location: /usr |
Size: 10.6 MB |
------------------------------------------------------------- |
Solaris 8 Traditional Chinese Common Localization 71.9 MB |
SunOS 4.x Asian Compatibility Localization 4 KB |
Solaris 8 Traditional Chinese HK Localization 10.6 MB |
Asian User Defined Character Tool for CDE 2.7 MB |
Ready to Install |
1. Install Now |
2. Start Over |
3. Exit Installation |
What would you like to do [1]? |
敲回车键后开始安装Solaris Languages光盘; |
Installing Solaris 8 Simplified Chinese Localization |
|-1%--------------25%-----------------50%-----------------75%--------------100%| |
Installing Solaris 8 Traditional Chinese Localization |
|-1%--------------25%-----------------50%-----------------75%--------------100%| |
Installing Solaris 8 Hong Kong Traditional Chinese Localization |
|-1%--------------25%-----------------50%-----------------75%--------------100%| |
|
Installation details: |
Product Result More Info |
1. Solaris 8 Simplified Chinese Localization Installed Available |
2. Solaris 8 Traditional Chinese Localization Installed Available |
3. Solaris 8 Hong Kong Traditional Chinese Localization Installed Available |
4. Done |
Enter the number corresponding to the desired selection for more |
information, or enter 4 to continue [4]: |
敲回车键,弹出光盘; |
<Press Return to reboot the system> {"!" exits} |
[] |
再敲回车键,重新启动系统。 |
至此,系统安装完成。 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|