ubuntu OPENCV移植
来源:互联网 发布:js sdk fail 编辑:程序博客网 时间:2024/06/05 07:10
Installing OpenCV 2.4.1 in Ubuntu 12.04 LTS
The latest Long Term Support version of Ubuntu(12.04 LTS) is out and a new version of OpenCV was released as well. This means that now is a great opportunity to update my OpenCV installation guide to the latest versions, Ubuntu 12.04 LTS and OpenCV 2.4.1.
We are going to setup OpenCV to use the new Qt highgui interface, which is much better than the simple highgui interface. Also, we will install OpenCV with support for OpenGL, as well as reading and writing videos, access to a webcam, Python, C and C++ interfaces, and Intel Threading Building Blocks (TBB).
OK, so the first step is to make sure that everything in the system is updated and upgraded:
1
sudo
apt-get update
2
sudo
apt-get upgrade
apt-get install quota
Now, you need to install many dependencies, such as support for reading and writing image files, drawing on the screen, some needed tools, etc… This step is very easy, you only need to write the following command in the Terminal:
1
sudo
apt-get
install
build-essential libgtk2.0-dev libjpeg-dev libtiff4-dev libjasper-dev libopenexr-dev cmake python-dev python-numpy python-tk libtbb-dev libeigen2-dev yasm libfaac-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev libx264-dev libqt4-dev libqt4-opengl-dev sphinx-common texlive-latex-extra libv4l-dev libdc1394-22-dev libavcodec-dev libavformat-dev libswscale-dev
Time to get the OpenCV 2.4.1 source code:
1
cd
~
2
wgethttp://downloads.sourceforge.net/project/opencvlibrary/opencv-unix/2.4.1/OpenCV-2.4.1.
tar
.bz2
3
tar
-xvf OpenCV-2.4.1.
tar
.bz2
4
cd
OpenCV-2.4.1
Now we have to generate the Makefile by using cmake. In here we can define which parts of OpenCV we want to compile. Since we want to use Python, TBB, OpenGL, Qt, work with videos, etc, here is where we need to set that. Just execute the following line at the terminal to create the appropriate Makefile. Note that there are two dots at the end of the line, it is an argument for the cmake program and it means the parent directory (because we are inside the build directory, and we want to refer to the OpenCV directory, which is its parent).
1
mkdir
build
2
cd
build
3
cmake -D WITH_TBB=ON -D BUILD_NEW_PYTHON_SUPPORT=ON -D WITH_V4L=ON -D INSTALL_C_EXAMPLES=ON -D INSTALL_PYTHON_EXAMPLES=ON -D BUILD_EXAMPLES=ON -D WITH_QT=ON -D WITH_OPENGL=ON ..
Check that the above command produces no error and that in particular it reports FFMPEG as YES. If this is not the case you will not be able to read or write videos. Also, check that Python, TBB, OpenGL, V4L, OpenGL and Qt are detected.
If anything is wrong, go back, correct the errors by maybe installing extra packages and then run cmake again. You should see something similar to this:
Now, you are ready to compile and install OpenCV 2.4.1:
1
make
2
sudo
make
install
Now you have to configure OpenCV. First, open the opencv.conf file with the following code:
1
sudo
gedit /etc/ld.so.conf.d/opencv.conf
Add the following line at the end of the file(it may be an empty file, that is ok) and then save it:
1
/usr/
local
/lib
Run the following code to configure the library:
1
sudo
ldconfig
Now you have to open another file:
1
sudo
gedit /etc/
bash
.bashrc
Add these two lines at the end of the file and save it:
1
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/
local
/lib/pkgconfig
2
export
PKG_CONFIG_PATH
Finally, close the console and open a new one, restart the computer or logout and then login again. OpenCV will not work correctly until you do this.
Now you have OpenCV 2.4.1 installed in your computer with Python, TBB, OpenGL, video, and Qt support.
Check out the cool Qt interface which provides image viewing capabilities with zoom, as well as the ability to save the current image with just one click.
If you zoom in enough, you can see the RGB (or intensity) values for each pixel.
Now let’s build some samples included in OpenCV:
1
cd
~/OpenCV-2.4.1/samples/c
2
chmod
+x build_all.sh
3
./build_all.sh
Now we are ready to run the examples:
1
./facedetect --cascade=
"/usr/local/share/OpenCV/haarcascades/haarcascade_frontalface_alt.xml"
--scale=1.5 lena.jpg
1
./facedetect --cascade=
"/usr/local/share/OpenCV/haarcascades/haarcascade_frontalface_alt.xml"
--nested-cascade=
"/usr/local/share/OpenCV/haarcascades/haarcascade_eye.xml"
--scale=1.5 lena.jpg
1
~/OpenCV-2.4.1/build/bin/grabcut ~/OpenCV-2.4.1/samples/cpp/lena.jpg
1
~/OpenCV-2.4.1/build/bin/calibration_artificial
1
python ~/OpenCV-2.4.1/samples/python2/turing.py
-----------------------------------------------------------------------------------------------人生过隙,忽然而已!
- ubuntu OPENCV移植
- opencv移植
- opencv 移植
- OpenCV移植
- OpenCV移植
- OpenCV移植
- OpenCV在Ubuntu和Linux系统下的移植
- Qt+OpenCV在不同ubuntu系统移植时SIGSEGV问题解决
- opencv移植dsp
- opencv移植dsp心得
- OpenCV WinCE/WM移植
- OpenCV的移植
- OpenCV移植到ARM
- OpenCV移植到ARM9
- OpenCV的移植
- zynq嵌入式opencv移植
- OpenCV 移植学习--EMCV
- opencv移植到Hiveboard
- Android学习资料整理
- java使用redis
- 冰心吴文藻的爱情始于留学远洋客轮上
- 安装minicom
- 水-百鸡百钱
- ubuntu OPENCV移植
- Android Performance(5) 模拟屏幕
- 通过指纹识别模块验证用户,解锁手机
- 什么是字符串常量池?
- Hive shell 常用命令
- 创建对象时总说找不到符号,请帮帮解决下
- 游戏Algorithm----抽奖算法----奖品有权重的情况探讨
- 字符指针初始化方式与字符串存储位置之间的关系
- MFC可停靠菜单栏的创建过程