Delphi DES加密解密单元
来源:互联网 发布:udid制作代理后台源码 编辑:程序博客网 时间:2024/05/18 03:08
使用方法非常简单,调用以下4个函数即可:
function EncryStr(Str, Key: String): String; --加密
function DecryStr(Str, Key: String): String; --解密
function EncryStrHex(Str, Key: String): String; --加密
function DecryStrHex(StrHex, Key: String): String; --解密
比如,使用sTest := EncryStrHex('delphi', 'you'); 加密, 则解密就用DecryStrHex(sTest, 'you'),加密和解密过程的key值必须一致
以下为DES单元:
unit DES;
interface
uses SysUtils;
type
TKeyByte = array[0..5] of Byte;
TDesMode = (dmEncry, dmDecry);
function EncryStr(Str, Key: String): String;
function DecryStr(Str, Key: String): String;
function EncryStrHex(Str, Key: String): String;
function DecryStrHex(StrHex, Key: String): String;
const
BitIP: array[0..63] of Byte = //初始值置IP
(57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7,
56, 48, 40, 32, 24, 16, 8, 0,
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6 );
BitCP: array[0..63] of Byte = //逆初始置IP-1
( 39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,
37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,
35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,
33, 1, 41, 9, 49, 17, 57, 25,
32, 0, 40, 8, 48, 16, 56, 24 );
BitExp: array[0..47] of Integer = // 位选择函数E
( 31, 0, 1, 2, 3, 4, 3, 4, 5, 6, 7, 8, 7, 8, 9,10,
11,12,11,12,13,14,15,16,15,16,17,18,19,20,19,20,
21,22,23,24,23,24,25,26,27,28,27,28,29,30,31,0 );
BitPM: array[0..31] of Byte = //置换函数P
( 15, 6,19,20,28,11,27,16, 0,14,22,25, 4,17,30, 9,
1, 7,23,13,31,26, 2, 8,18,12,29, 5,21,10, 3,24 );
sBox: array[0..7] of array[0..63] of Byte = //S盒
( ( 14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13 ),
( 15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9 ),
( 10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12 ),
( 7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14 ),
( 2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3 ),
( 12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13 ),
( 4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12 ),
( 13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11 ) );
BitPMC1: array[0..55] of Byte = //选择置换PC-1
( 56, 48, 40, 32, 24, 16, 8,
0, 57, 49, 41, 33, 25, 17,
9, 1, 58, 50, 42, 34, 26,
18, 10, 2, 59, 51, 43, 35,
62, 54, 46, 38, 30, 22, 14,
6, 61, 53, 45, 37, 29, 21,
13, 5, 60, 52, 44, 36, 28,
20, 12, 4, 27, 19, 11, 3 );
BitPMC2: array[0..47] of Byte =//选择置换PC-2
( 13, 16, 10, 23, 0, 4,
2, 27, 14, 5, 20, 9,
22, 18, 11, 3, 25, 7,
15, 6, 26, 19, 12, 1,
40, 51, 30, 36, 46, 54,
29, 39, 50, 44, 32, 47,
43, 48, 38, 55, 33, 52,
45, 41, 49, 35, 28, 31 );
var
subKey: array[0..15] of TKeyByte;
implementation
procedure initPermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);//填充字符
for i := 0 to 63 do
if (inData[BitIP[i] shr 3] and (1 shl (7- (BitIP[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData[i] := newData[i];
end;
procedure conversePermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);
for i := 0 to 63 do
if (inData[BitCP[i] shr 3] and (1 shl (7-(BitCP[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData[i] := newData[i];
end;
procedure expand(inData: array of Byte; var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitExp[i] shr 3] and (1 shl (7-(BitExp[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure permutation(var inData: array of Byte);
var
newData: array[0..3] of Byte;
i: Integer;
begin
FillChar(newData, 4, 0);
for i := 0 to 31 do
if (inData[BitPM[i] shr 3] and (1 shl (7-(BitPM[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 3 do inData[i] := newData[i];
end;
function si(s,inByte: Byte): Byte;
var
c: Byte;
begin
c := (inByte and $20) or ((inByte and $1e) shr 1) or
((inByte and $01) shl 4);
Result := (sBox[s][c] and $0f);
end;
procedure permutationChoose1(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 7, 0);
for i := 0 to 55 do
if (inData[BitPMC1[i] shr 3] and (1 shl (7-(BitPMC1[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure permutationChoose2(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitPMC2[i] shr 3] and (1 shl (7-(BitPMC2[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure cycleMove(var inData: array of Byte; bitMove: Byte);
var
i: Integer;
begin
for i := 0 to bitMove - 1 do
begin
inData[0] := (inData[0] shl 1) or (inData[1] shr 7);
inData[1] := (inData[1] shl 1) or (inData[2] shr 7);
inData[2] := (inData[2] shl 1) or (inData[3] shr 7);
inData[3] := (inData[3] shl 1) or ((inData[0] and $10) shr 4);
inData[0] := (inData[0] and $0f);
end;
end;
procedure makeKey(inKey: array of Byte; var outKey: array of TKeyByte);
const
bitDisplace: array[0..15] of Byte =
( 1,1,2,2, 2,2,2,2, 1,2,2,2, 2,2,2,1 );
var
outData56: array[0..6] of Byte;
key28l: array[0..3] of Byte;
key28r: array[0..3] of Byte;
key56o: array[0..6] of Byte;
i: Integer;
begin
permutationChoose1(inKey, outData56);
key28l[0] := outData56[0] shr 4;
key28l[1] := (outData56[0] shl 4) or (outData56[1] shr 4);
key28l[2] := (outData56[1] shl 4) or (outData56[2] shr 4);
key28l[3] := (outData56[2] shl 4) or (outData56[3] shr 4);
key28r[0] := outData56[3] and $0f;
key28r[1] := outData56[4];
key28r[2] := outData56[5];
key28r[3] := outData56[6];
for i := 0 to 15 do
begin
cycleMove(key28l, bitDisplace[i]);
cycleMove(key28r, bitDisplace[i]);
key56o[0] := (key28l[0] shl 4) or (key28l[1] shr 4);
key56o[1] := (key28l[1] shl 4) or (key28l[2] shr 4);
key56o[2] := (key28l[2] shl 4) or (key28l[3] shr 4);
key56o[3] := (key28l[3] shl 4) or (key28r[0]);
key56o[4] := key28r[1];
key56o[5] := key28r[2];
key56o[6] := key28r[3];
permutationChoose2(key56o, outKey[i]);
end;
end;
procedure encry(inData, subKey: array of Byte;
var outData: array of Byte);
var
outBuf: array[0..5] of Byte;
buf: array[0..7] of Byte;
i: Integer;
begin
expand(inData, outBuf);
for i := 0 to 5 do outBuf[i] := outBuf[i] xor subKey[i];
buf[0] := outBuf[0] shr 2;
buf[1] := ((outBuf[0] and $03) shl 4) or (outBuf[1] shr 4);
buf[2] := ((outBuf[1] and $0f) shl 2) or (outBuf[2] shr 6);
buf[3] := outBuf[2] and $3f;
buf[4] := outBuf[3] shr 2;
buf[5] := ((outBuf[3] and $03) shl 4) or (outBuf[4] shr 4);
buf[6] := ((outBuf[4] and $0f) shl 2) or (outBuf[5] shr 6);
buf[7] := outBuf[5] and $3f;
for i := 0 to 7 do buf[i] := si(i, buf[i]);
for i := 0 to 3 do outBuf[i] := (buf[i*2] shl 4) or buf[i*2+1];
permutation(outBuf);
for i := 0 to 3 do outData[i] := outBuf[i];
end;
procedure desData(desMode: TDesMode;
inData: array of Byte; var outData: array of Byte);
// inData, outData 都为8Bytes,否则出错
var
i, j: Integer;
temp, buf: array[0..3] of Byte;
begin
for i := 0 to 7 do outData[i] := inData[i];
initPermutation(outData);
if desMode = dmEncry then
begin
for i := 0 to 15 do
begin
for j := 0 to 3 do temp[j] := outData[j]; //temp = Ln
for j := 0 to 3 do outData[j] := outData[j + 4]; //Ln+1 = Rn
encry(outData, subKey[i], buf); //Rn ==Kn==> buf
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j]; //Rn+1 = Ln^buf
end;
for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end
else if desMode = dmDecry then
begin
for i := 15 downto 0 do
begin
for j := 0 to 3 do temp[j] := outData[j];
for j := 0 to 3 do outData[j] := outData[j + 4];
encry(outData, subKey[i], buf);
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j];
end;
for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end;
conversePermutation(outData);
end;
//////////////////////////////////////////////////////////////
function EncryStr(Str, Key: String): String;
var
StrByte, OutByte, KeyByte: array[0..7] of Byte;
StrResult: String;
I, J: Integer;
begin
if (Length(Str) > 0) and (Ord(Str[Length(Str)]) = 0) then
raise Exception.Create('Error: the last char is NULL char.');
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);
while Length(Str) mod 8 <> 0 do Str := Str + Chr(0);
for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
makeKey(keyByte, subKey);
StrResult := '';
for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do
StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmEncry, StrByte, OutByte);
for J := 0 to 7 do
StrResult := StrResult + Chr(OutByte[J]);
end;
Result := StrResult;
end;
function DecryStr(Str, Key: String): String;
var
StrByte, OutByte, KeyByte: array[0..7] of Byte;
StrResult: String;
I, J: Integer;
begin
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);
for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
makeKey(keyByte, subKey);
StrResult := '';
for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmDecry, StrByte, OutByte);
for J := 0 to 7 do
StrResult := StrResult + Chr(OutByte[J]);
end;
while (Length(StrResult) > 0) and
(Ord(StrResult[Length(StrResult)]) = 0) do
Delete(StrResult, Length(StrResult), 1);
Result := StrResult;
end;
///////////////////////////////////////////////////////////
function EncryStrHex(Str, Key: String): String;
var
StrResult, TempResult, Temp: String;
I: Integer;
begin
TempResult := EncryStr(Str, Key);
StrResult := '';
for I := 0 to Length(TempResult) - 1 do
begin
Temp := Format('%x', [Ord(TempResult[I + 1])]);
if Length(Temp) = 1 then Temp := '0' + Temp;
StrResult := StrResult + Temp;
end;
Result := StrResult;
end;
function DecryStrHex(StrHex, Key: String): String;
function HexToInt(Hex: String): Integer;
var
I, Res: Integer;
ch: Char;
begin
Res := 0;
for I := 0 to Length(Hex) - 1 do
begin
ch := Hex[I + 1];
if (ch >= '0') and (ch <= '9') then
Res := Res * 16 + Ord(ch) - Ord('0')
else if (ch >= 'A') and (ch <= 'F') then
Res := Res * 16 + Ord(ch) - Ord('A') + 10
else if (ch >= 'a') and (ch <= 'f') then
Res := Res * 16 + Ord(ch) - Ord('a') + 10
else raise Exception.Create('Error: not a Hex String');
end;
Result := Res;
end;
var
Str, Temp: String;
I: Integer;
begin
Str := '';
for I := 0 to Length(StrHex) div 2 - 1 do
begin
Temp := Copy(StrHex, I * 2 + 1, 2);
Str := Str + Chr(HexToInt(Temp));
end;
Result := DecryStr(Str, Key);
end;
end.
0 0
- Delphi DES加密解密单元
- 【转】QQ Tea加密解密单元 Delphi
- Delphi中关于DES加密解密的方法
- DES/3DES加密,解密
- DES加密解密代码
- 3DES 加密解密
- DES加密解密函数
- DES加密解密
- DES加密、解密
- des加密解密
- DES 加密/解密整理
- DES加密解密
- C#DES加密解密
- DES加密解密
- 文件DES加密解密
- c# DES 加密解密
- 3des加密解密
- java--des加密解密
- 彩色石子 问题的C++解法
- XCode工程内多Targets教程
- 让windows8 变成无线路由器的方法
- Oracle日常性能查看
- 修改文件目录权限
- Delphi DES加密解密单元
- shell 脚本 面试题
- sqlite3 的增删查找
- 音量图标不显示了怎么恢复
- Excel2007设置自动保存
- 管理大规模服务器
- Java - split()函数和trim()函数的用法
- USCOJ 1072: 迷宫
- 使用SQL Server维护计划实现数据库定时自动备份