CentOS-构建SSH服务器 -SecureCRT 7.0登录
来源:互联网 发布:adobe acrobat软件下载 编辑:程序博客网 时间:2024/06/02 04:55
一、服务器SSH相关配置文件的修改
首先修改SSH的配置文件。如下:
[root@sample ~]# vi /etc/ssh/sshd_config ← 用vi打开SSH的配置文件点击(此处)折叠或打开
- #Protocol 2,1 ← 找到此行将行头“#”删除,再将行末的“,1”删除,只允许SSH2方式的连接
- ↓
- Protocol 2 ← 修改后变为此状态,仅使用SSH2
- #ServerKeyBits 768 ← 找到这一行,将行首的“#”去掉,并将768改为1024
- ↓
- ServerKeyBits 1024 ← 修改后变为此状态,将ServerKey强度改为1024比特
- #PermitRootLogin yes ← 找到这一行,将行首的“#”去掉,并将yes改为no
- ↓
- PermitRootLogin no ← 修改后变为此状态,不允许用root进行登录
- #PasswordAuthentication yes ← 找到这一行,将yes改为no
- ↓
- PasswordAuthentication no ← 修改后变为此状态,不允许密码方式的登录
- #PermitEmptyPasswords no ← 找到此行将行头的“#”删除,不允许空密码登录
- ↓
- PermitEmptyPasswords no ← 修改后变为此状态,禁止空密码进行登录
因为我们只想让SSH服务为管理系统提供方便,所以在不通过外网远程管理系统的情况下,只允许内网客户端通过SSH登录到服务器,以最大限度减少不安全因素。设置方法如下:
[root@sample ~]# vi /etc/hosts.deny ← 修改屏蔽规则,在文尾添加相应行点击(此处)折叠或打开
- #
- # hosts.deny This file describes the names of the hosts which are
- # *not* allowed to use the local INET services, as decided
- # by the '/usr/sbin/tcpd' server.
- #
- # The portmap line is redundant, but it is left to remind you that
- # the new secure portmap uses hosts.deny and hosts.allow. In particular
- # you should know that NFS uses portmap!
- sshd: ALL ← 添加这一行,屏蔽来自所有的SSH连接请求
- [root@sample ~]# vi /etc/hosts.allow ← 修改允许规则,在文尾添加相应行
- #
- # hosts.allow This file describes the names of the hosts which are
- # allowed to use the local INET services, as decided
- # by the '/usr/sbin/tcpd' server.
- #
- sshd: 192.168.0. ← 添加这一行,只允许来自内网的SSH连接请求
在修改完SSH的配置文件后,需要重新启动SSH服务才能使新的设置生效。
root@sample ~]# /etc/rc.d/init.d/sshd restart ← 重新启动SSH服务器 Stopping sshd: [ OK ] Starting sshd: [ OK ] ← SSH服务器重新启动成功这时,在远程终端(自用PC等等)上,用SSH客户端软件以正常的密码的方式是无法登录服务器的。为了在客户能够登录到服务器,我们接下来建立SSH用的公钥与私钥,以用于客户端以“钥匙”的方式登录SSH服务器。
SH2的公钥与私钥的建立登录为一个一般用户,基于这个用户建立公钥与私钥。(这里以bruce用户为例)
[root@sample ~]# su -bruce← 登录为一般用户bruce[centospub@sample ~]$ ssh-keygen -t rsa ← 建立公钥与私钥
Generating public/private rsa key pair. Enter file in which to save the key (/home/kaz/.ssh/id_rsa): ← 钥匙的文件名,这里保持默认直接回车
Created directory '/home/kaz/.ssh' Enter passphrase (empty for nobruce): ← 输入口令
Enter same passphrase again: ← 再次输入口令(记住口令)
Your identification has been saved in /home/kaz/.ssh/id_rsa. Your public key has been saved in /home/kaz/.ssh/id_rsa.pub. The key fingerprint is: tf:rs:e3:7s:28:59:5s:93:fe:33:84:01:cj:65:3b:8e centospub@sample.centospub.com
然后确认一下公钥与密钥的建立,以及对应于客户端的一些处理。
[centospub@sample ~]$ cd ~/.ssh ← 进入用户SSH配置文件的目录[centospub@sample .ssh]$ ls -l ← 列出文件
total 16
-rw------- 1 centospub centospub 951 Sep 4 19:22 id_rsa ← 确认私钥已被建立
-rw-r--r-- 1 centospub centospub 241 Sep 4 19:22 id_rsa.pub ← 确认公钥已被建立 [centospub@sample .ssh]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys ← 公钥内容输出到相应文件中
[centospub@sample .ssh]$ rm -f ~/.ssh/id_rsa.pub ← 删除原来的公钥文件 [centospub@sample .ssh]$ chmod 400 ~/.ssh/authorized_keys ← 将新建立的公钥文件属性设置为400
然后,将私钥通过安全的方式转移到欲通过SSH连接到服务器的PC上。这里,以通过3.5寸磁盘为介质为例:
centospub@sample .ssh]$ exit ← 退出一般用户的登录(返回root的登录)[root@sample ~]# mount /mnt/floppy/ ← 加载软盘驱动器
[root@sample ~]# mv /home/centospub/.ssh/id_rsa /mnt/floppy/ ← 将刚刚建立的私钥移动到软盘
[root@sample ~]# umount /mnt/floppy/ ← 卸载软盘驱动器
这样,我们通过对应于centospub用户的私钥,就可以在远程终端上通过SSH客户端连接到服务器了。
二、SecureCRT 7.0客户端配置登录
第一步:
第二步:
第三步:
第四步:初次登录会弹出输入密钥密码框,输完以后就不用输密码了
0 0
- CentOS-构建SSH服务器 -SecureCRT 7.0登录
- SecureCRT ssh登录服务器
- SecureCRT使用密钥登录SSH服务器
- CentOS SSH远程登录服务器
- secureCRT 实现 xp ssh登录 centos(vbox虚拟机)
- CentOS下用OpenSSH构建SSH服务器
- 配置SecureCRT以SSH公钥方式登录服务器
- CentOs服务器无密码SSH登录
- Openshift SSH方式+SecureCRT登录
- SecureCrt 远程登录(ssh)失败
- CentOS下用OpenSSH构建SSH服务器(图)
- SSH构建登录系统
- 配置Centos服务器SSH远程登录秘钥
- SSH密钥登录让VPS下centos服务器更安全
- 服务器centos 使用ssh key登录 设置root密码
- CentOS 7下SSH远程登录服务器详解
- [Linux] CentOS/Mac OS 免密ssh登录远程服务器
- SecureCrt 使用ssh登录的linux服务器后,vi打开文件后,无颜色显示
- MFC学习笔记——void CLi11View::OnDraw(CDC* /*pDC*/)
- Android Service的全面总结
- KMP算法
- 数据源改变时,DataGrid 排序消失了?
- Failed to install LAN_TEST.apk on device 'emulator-5554': timeout有效的解决手段
- CentOS-构建SSH服务器 -SecureCRT 7.0登录
- 一款Linux下状态机建模与代码生成工具FSME/FSMC
- 拷贝构造函数
- Java基础知识之典型范例一——诺诺"涂鸦"记忆
- WPF DataPicker修改默认的水印文本
- HDOJ A + B Problem II(编程基础)
- C# 集合类型
- 实现图标的动态变换:
- 在读取图片的时候压缩减小内存开支