POJ训练计划3009_Curling 2.0(DFS)
来源:互联网 发布:asp防止sql注入代码 编辑:程序博客网 时间:2024/05/17 03:42
Description
On Planet MM-21, after their Olympic games this year, curling is getting popular. But the rules are somewhat different from ours. The game is played on an ice game board on which a square mesh is marked. They use only a single stone. The purpose of the game is to lead the stone from the start to the goal with the minimum number of moves.
Fig. 1 shows an example of a game board. Some squares may be occupied with blocks. There are two special squares namely the start and the goal, which are not occupied with blocks. (These two squares are distinct.) Once the stone begins to move, it will proceed until it hits a block. In order to bring the stone to the goal, you may have to stop the stone by hitting it against a block, and throw again.
Fig. 1: Example of board (S: start, G: goal)
The movement of the stone obeys the following rules:
- At the beginning, the stone stands still at the start square.
- The movements of the stone are restricted to x and y directions. Diagonal moves are prohibited.
- When the stone stands still, you can make it moving by throwing it. You may throw it to any direction unless it is blocked immediately(Fig. 2(a)).
- Once thrown, the stone keeps moving to the same direction until one of the following occurs:
- The stone hits a block (Fig. 2(b), (c)).
- The stone stops at the square next to the block it hit.
- The block disappears.
- The stone gets out of the board.
- The game ends in failure.
- The stone reaches the goal square.
- The stone stops there and the game ends in success.
- The stone hits a block (Fig. 2(b), (c)).
- You cannot throw the stone more than 10 times in a game. If the stone does not reach the goal in 10 moves, the game ends in failure.
Fig. 2: Stone movements
Under the rules, we would like to know whether the stone at the start can reach the goal and, if yes, the minimum number of moves required.
With the initial configuration shown in Fig. 1, 4 moves are required to bring the stone from the start to the goal. The route is shown in Fig. 3(a). Notice when the stone reaches the goal, the board configuration has changed as in Fig. 3(b).
Fig. 3: The solution for Fig. D-1 and the final board configuration
Input
The input is a sequence of datasets. The end of the input is indicated by a line containing two zeros separated by a space. The number of datasets never exceeds 100.
Each dataset is formatted as follows.
the width(=w) and the height(=h) of the board
First row of the board
...
h-th row of the board
The width and the height of the board satisfy: 2 <= w <= 20, 1 <= h <= 20.
Each line consists of w decimal numbers delimited by a space. The number describes the status of the corresponding square.
0vacant square1block2start position3goal position
The dataset for Fig. D-1 is as follows:
6 6
1 0 0 2 1 0
1 1 0 0 0 0
0 0 0 0 0 3
0 0 0 0 0 0
1 0 0 0 0 1
0 1 1 1 1 1
Output
For each dataset, print a line having a decimal integer indicating the minimum number of moves along a route from the start to the goal. If there are no such routes, print -1 instead. Each line should not have any character other than this number.
Sample Input
2 13 26 61 0 0 2 1 01 1 0 0 0 00 0 0 0 0 30 0 0 0 0 01 0 0 0 0 10 1 1 1 1 16 11 1 2 1 1 36 11 0 2 1 1 312 12 0 1 1 1 1 1 1 1 1 1 313 12 0 1 1 1 1 1 1 1 1 1 1 30 0
Sample Output
14-1410-1
Source
#include <iostream>#include <cstring>#include <cstdio>using namespace std;int w,h;int mmap[22][22],ans=99999999,si,sj,ei,ej;int dx[]={0,-1,0,1};int dy[]={-1,0,1,0};void dfs(int cnt,int s,int e){ if(cnt>ans-1)return ; if(mmap[s][e]==3) { if(cnt<ans) { ans=cnt; return ; } } for(int i=0;i<4;i++) { int x=dx[i]+s; int y=dy[i]+e; if(x>=0&&x<h&&y>=0&&y<w&&mmap[x][y]!=1) { while(x>=0&&x<h&&y>=0&&y<w&&mmap[x][y]==0) { x+=dx[i]; y+=dy[i]; } if(x>=0&&x<h&&y>=0&&y<w) { if(mmap[x][y]==1) { mmap[x][y]=0; dfs(cnt+1,x-dx[i],y-dy[i]); mmap[x][y]=1; } if(mmap[x][y]==3) { dfs(cnt+1,x,y); } } } }}int main(){ int i,j; while(~scanf("%d%d",&w,&h)) { ans=11; if(w==0&&h==0)break; for(i=0;i<h;i++) { for(j=0;j<w;j++) { scanf("%d",&mmap[i][j]); if(mmap[i][j]==2) { si=i,sj=j; mmap[i][j]=0; } } } dfs(0,si,sj); if(ans>=11) printf("-1\n"); else printf("%d\n",ans); } return 0;}
- POJ训练计划3009_Curling 2.0(DFS)
- POJ训练计划2488_A Knight's Journey(DFS+回溯)
- POJ训练计划1321_棋盘问题(DFS)
- 7.22BFS&DFS训练计划
- poj系统训练计划
- ACM POJ训练计划
- poj训练计划
- poj训练计划
- POJ DP训练计划
- POJ训练计划
- POJ训练计划
- poj训练计划
- POJ训练计划3083_Children of the Candy Corn(BFS+DFS+回溯)
- 寒假训练——POJ - 3009 Curling 2.0 dfs and similiar
- POJ训练计划2632_Crashing Robots(模拟)
- POJ训练计划2240_Arbitrage(SPFA)
- POJ训练计划2503_Babelfish(二分)
- POJ训练计划1840_Eqs(二分)
- 远程线程注入dll
- Airplay 教程: 一个 Apple TV 多人竞答游戏(1)
- 面试笔试100篇
- 关于c#泛类型参数T的约束
- Codeforces Alpha Round #20 (Codeforces format) C. Dijkstra?(裸的dijkstra)
- POJ训练计划3009_Curling 2.0(DFS)
- c++类自实现列表,有点意思
- C#解析json文件的方法
- mysql索引字段长度的问题
- cmd下编译运行eclipse工程java Exception inthread main java.long.NoClassDefFoundError:xxx
- ORACLE MERGE INTO语句,unable to get a stable set of rows in the source tables报错解决
- 判断win7系统是否遭受木马攻击的方法
- IOS多线程编程之Grand Central Dispatch(GCD)介绍和使用
- feof()和EOF的用法—— C语言中文件结尾的判断 (个人感觉写的挺深刻)