centos6.5 x86_64安装oracle 11.2.0.3grid
来源：互联网 发布：ea自动交易软件 编辑：程序博客网 时间：2024/06/05 05:19
centos6.5 x86_64安装oracle 11.2.0.3grid
1、安装前的准备 工作
1.1、配置node1
1.1.1、配置虚拟机并安装centos
安装node1-----
1、安装node1
1.1、添加30G的硬盘，1G内存，2个处理器，添加两个网卡NAT
1.2、设置主机名同时配置网络
node1.localdomain 192.168.0.3/255.255.255.0/192.168.0.1 eth0
node1-priv.localdomain 10.10.10.31/255.255.255.0/10.10.10.1 eth1
1.3、新建一个分区结构
/boot-256m /-8G /tmp-2G swap-3G /u01-10G
安装grid的要求：
memory-1.5G swap-2.7G tmp-1G
1.4、Minimal安装
安装209个包
1.5、cmd-没有关闭防火墙和selinux
把网卡设置为host only可以ping通
问题：
（1）其中一个网卡没有保存
新增一个网卡host only
# ifconfig -a ##多出一个HWaddr
# cd /etc/sysconfig/network-scripts/
# cp /etc/sysconfig/network-scripts/ifcfg-eth0 ifcfg-eth1
# ping 10.10.10.31 ##可以ping通
安装node2-----
1、安装node2
1.1、添加30G的硬盘，1G内存，2个处理器，添加两个网卡host only
1.2、设置主机名同时配置网络
node2.localdomain 192.168.0.4/255.255.255.0/192.168.0.1 eth0
node2-priv.localdomain 10.10.10.32/255.255.255.0/10.10.10.1 eth1
1.3、新建一个分区结构
/boot-256m /-8G /tmp-2G swap-3G /u01-10G
1.4、Minimal安装
安装209个包
1.5、cmd
网卡host only：重启后，直接ping 192.168.0.4可以ping通
1.1.2、node1-配置yum，并安装X Window和Desktop
1、node1和node2互相ping，都能ping通
[root@node1 ~]# ping 192.168.0.3
[root@node1 ~]# ping 192.168.0.4
[root@node1 ~]# ping 10.10.10.31
[root@node1 ~]# ping 10.10.10.32
[root@node2 ~]# ping 10.10.10.31
[root@node2 ~]# ping 10.10.10.32
[root@node2 ~]# ping 192.168.0.3
[root@node2 ~]# ping 192.168.0.4
2、node1配置yum，并安装X系统和桌面系统
# mount /dev/cdrom /mnt
# cd /etc/yum.repos.d/
# mv CentOS-Base.repo CentOS-Base.repo.bak
# cp CentOS-Base.repo.bak CentOS-Base.repo
# vi CentOS-Base.repo
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=file:///mnt/Packages
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# yum clean all
# rm CentOS-Base.repo
# cp CentOS-Media.repo CentOS-Media.repo.bak
# vi CentOS-Media.repo ##只需修改baseurl
[c6-media]
name=CentOS-$releasever - Media
baseurl=file:///mnt/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# yum --disablerepo=* --enablerepo=c6-media update
Loaded plugins: fastestmirror
Determining fastest mirrors
c6-media | 4.0 kB 00:00 ...
c6-media/primary_db | 4.4 MB 00:00 ...
Setting up Update Process
No Packages marked for Update
# yum --disablerepo=* --enablerepo=c6-media clean all
# yum --disablerepo=* --enablerepo=c6-media makecache
# yum --disablerepo=* --enablerepo=c6-media groupinstall "Desktop" ##需要安装294个包，禁用所有系统提供的.repo库
# yum --disablerepo=* --enablerepo=c6-media groupinstall "X Window System"
3、安装vnc
# rpm -qa |grep vnc
# yum install tigervnc tigervnc-server
Loaded plugins: fastestmirror, refresh-packagekit
Loading mirror speeds from cached hostfile
Setting up Install Process
No package tigervnc available.
No package tigervnc-server available.
# cd /mnt/Packages/
# rpm -ivh tigervnc*
error: Failed dependencies:
perl is needed by tigervnc-server-1.1.0-5.el6_4.1.x86_64
xorg-x11-fonts-misc is needed by tigervnc-server-1.1.0-5.el6_4.1.x86_64
# yum --disablerepo=* --enablerepo=c6-media install vnc
# rpm -qa |grep vnc
tigervnc-1.1.0-5.el6_4.1.x86_64 ##只是安装了tigervnc
# yum --disablerepo=* --enablerepo=c6-media install tigervnc tigervnc-server
Running Transaction
Installing : 1:perl-Pod-Escapes-1.04-136.el6.x86_64 1/9
Installing : 4:perl-libs-5.10.1-136.el6.x86_64 2/9
Installing : 1:perl-Pod-Simple-3.13-136.el6.x86_64 3/9
Installing : 3:perl-version-0.77-136.el6.x86_64 4/9
Installing : 1:perl-Module-Pluggable-3.90-136.el6.x86_64 5/9
Installing : 4:perl-5.10.1-136.el6.x86_64 6/9
Installing : 1:xorg-x11-font-utils-7.2-11.el6.x86_64 7/9
Installing : xorg-x11-fonts-misc-7.2-9.1.el6.noarch 8/9
Installing : tigervnc-server-1.1.0-5.el6_4.1.x86_64
# vi /etc/sysconfig/vncservers
VNCSERVERS="1:root"
VNCSERVERARGS[2]="-geometry 1024x768 -nolisten tcp"
# vncpasswd
# service vncserver start
Starting VNC server: 1:root xauth: creating new authority file /root/.Xauthority
xauth: (stdin):1: bad display name "node1.localdomain:1" in "add" command
New 'node1.localdomain:1 (root)' desktop is node1.localdomain:1
Creating default startup script /root/.vnc/xstartup
Starting applications specified in /root/.vnc/xstartup
Log file is /root/.vnc/node1.localdomain:1.log
[ OK ]
# cd ~/.vnc/
# vi xstartup
#!/bin/sh
export LANG
#unset SESSION_MANAGER
#exec /etc/X11/xinit/xinitrc
[ -x /etc/vnc/xistartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
gnome-session &
必选项：vnc viewer连接centos服务端时,注意防火墙对应的端口是否开放/或者关闭防火墙,否则会报10060(超时错误)，使用下面命令配置规则允许对应端口tcp包通过：
# iptables -I INPUT 1 -p tcp --dport 5901 -j ACCEPT
# service iptables save
# service iptables restart
问题
（1）Could not open/read file:///mnt/Packages/repodata/repomd.xml
把baseurl设置为file:///mnt/
1.1.3、node1-修改/etc/hosts文件
1、
1.1、
# vi /etc/hosts
#node1
192.168.0.3 node1.localdomain node1
192.168.0.5 node1-vip.localdomain node1-vip
10.10.10.31 node1-priv.localdomain node1-priv
#node2
192.168.0.4 node2.localdomain node2
192.168.0.6 node2-vip.localdomain node2-vip
10.10.10.32 node2-priv.localdomain node2-privi
#scan-ip
192.168.0.8 scan-cluster.localdomain scan-cluster
******在node2上做如上相同的操作
1.1.4、node1-配置dns，使scan-ip可以被解析
1、
1.1、安装bind服务
# ping 192.168.0.5 ##ping不通
# ping 192.168.0.15 ##ping不通
[root@node1 ～]# yum --disablerepo=* --enablerepo=c6-media install bind
1.2、配置/var/named/chroot/etc/named.conf 文件
*经过了解dns只需安装bind、bind-chroot、bind-utils
# yum --disablerepo=* --enablerepo=c6-media remove bind*
# yum --disablerepo=* --enablerepo=c6-media install bind bind-chroot bind-utils
1.3、配置/etc/named.conf 文件 不再是/var/named/chroot/etc/named.conf 文件
1.3.1、修改主配置文件
# cp -p /etc/named.conf named.conf.bak
# vi /etc/named.conf
listen-on port 53 { any; };
allow-query { any; };
# cp -p /etc/named.rfc1912.zones named.rfc1912.zones.bak
1.3.2、配置zone文件
# vi /etc/named.rfc1912.zones ##追加以下信息
zone "localdomain" IN {
type master;
file "forward.zone";
allow-update { none; };
};
zone "0.168.192.in-addr.arpa" IN {
type master;
file "reverse.zone";
allow-update { none; };
};
1.3.3、生成正向解析数据库文件
# cd /var/named/
# cp -p named.localhost forward.zone
# vi forward.zone ##正向解析数据库文件末尾加入如下
$TTL 1D
@ IN SOA node1.localdomain. root.localdomain. (
0 ; serial
1D ; refresh
1H ; retry
1W ; expire
3H ) ; minimum
IN NS node1.localdomain.
node1 IN A 127.0.0.1
scan-cluster.localdomain IN A 192.168.0.8
scan-cluster IN A 192.168.0.8
~
1.3.4、生成方向解析数据库文件
# cp -p named.loopback reverse.zone
# vi reverse.zone ##反向解析数据库文件末尾加入如下
$TTL 1D
@ IN SOA node1.localdomain. root.localdomain. (
0 ; serial
1D ; refresh
1H ; retry
1W ; expire
3H ) ; minimum
IN NS node1.localdomain.
3 IN PTR node1.localdomain.
8 IN PTR scan-cluster.localdomain.
8 IN PTR scan-cluster.
# service named restart
# vi /etc/resolv.conf ##文件末尾加入如下
search localdomain
nameserver 192.168.0.3
1.1.5、检查软件环境需求
1.1、检查操作系统版本
# cat /etc/issue
CentOS release 6.5 (Final)
Kernel \r on an \m
# cat /proc/version
Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013
1.2、检查内核
# uname -r
2.6.32-431.el6.x86_64
1.3、检查必要的包
binutils-2.20.51.0.2-5.11.el6 (x86_64)
compat-libcap1-1.10-1 (x86_64)
compat-libstdc++-33-3.2.3-69.el6 (x86_64)
compat-libstdc++-33-3.2.3-69.el6.i686
gcc-4.4.4-13.el6 (x86_64)
gcc-c++-4.4.4-13.el6 (x86_64)
glibc-2.12-1.7.el6 (i686)
glibc-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6.i686
ksh
libgcc-4.4.4-13.el6 (i686)
libgcc-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6.i686
libstdc++-devel-4.4.4-13.el6 (x86_64)
libstdc++-devel-4.4.4-13.el6.i686
libaio-0.3.107-10.el6 (x86_64)
libaio-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6 (x86_64)
libaio-devel-0.3.107-10.el6.i686
make-3.81-19.el6
sysstat-9.0.4-11.el6 (x86_64)
# rpm -qa |grep binutils
binutils-2.20.51.0.2-5.36.el6.x86_64
# rpm -qa |grep compat-libcap
# yum --disablerepo=* --enablerepo=c6-media install compat-libcap
Loaded plugins: fastestmirror, refresh-packagekit
Loading mirror speeds from cached hostfile
Setting up Install Process
No package compat-libcap available.
Error: Nothing to do
# yum --disablerepo=* --enablerepo=c6-media install compat-libcap1
# rpm -qa |grep compat-libstdc++
# yum --disablerepo=* --enablerepo=c6-media install compat-libstdc++*
# rpm -qa |grep gcc
libgcc-4.4.7-4.el6.x86_64
libgcc-4.4.7-4.el6.i686
# yum --disablerepo=* --enablerepo=c6-media install gcc
# yum --disablerepo=* --enablerepo=c6-media install gcc-c++
# rpm -qa |grep gcc
gcc-4.4.7-4.el6.x86_64
libgcc-4.4.7-4.el6.x86_64
libgcc-4.4.7-4.el6.i686
gcc-c++-4.4.7-4.el6.x86_64
# rpm -qa |grep glibc
glibc-common-2.12-1.132.el6.x86_64
glibc-2.12-1.132.el6.x86_64
glibc-2.12-1.132.el6.i686
glibc-devel-2.12-1.132.el6.x86_64
glibc-headers-2.12-1.132.el6.x86_64
# yum --disablerepo=* --enablerepo=c6-media install glibc-devel
Loaded plugins: fastestmirror, refresh-packagekit
Loading mirror speeds from cached hostfile
Setting up Install Process
Package glibc-devel-2.12-1.132.el6.x86_64 already installed and latest version
Nothing to do
# yum --disablerepo=* --enablerepo=c6-media install glibc-devel.i686 *****
# rpm -qa |grep libgcc
libgcc-4.4.7-4.el6.x86_64
libgcc-4.4.7-4.el6.i686
# rpm -qa |grep libstdc++
libstdc++-4.4.7-4.el6.x86_64
compat-libstdc++-296-2.96-144.el6.i686
libstdc++-devel-4.4.7-4.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
# yum --disablerepo=* --enablerepo=c6-media install libstdc++.i686
# yum --disablerepo=* --enablerepo=c6-media install libstdc++-devel.i686
# rpm -qa |grep libaio ##值得注意的安装方法
# yum --disablerepo=* --enablerepo=c6-media install libaio*
# rpm -qa |grep libaio
libaio-devel-0.3.107-10.el6.x86_64
libaio-0.3.107-10.el6.x86_64
# yum --disablerepo=* --enablerepo=c6-media install libaio.i686
# yum --disablerepo=* --enablerepo=c6-media install libaio-devel.i686
# rpm -qa |grep ksh
# yum --disablerepo=* --enablerepo=c6-media install ksh
# rpm -qa |grep make
make-3.81-20.el6.x86_64
# yum --disablerepo=* --enablerepo=c6-media install libXp.i686
# yum --disablerepo=* --enablerepo=c6-media install libXt.i686
1.1.6、配置内核参数
# vi /etc/sysctl.conf ##原始的shmmax/shmall 比较大
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
# /sbin/sysctl –p
error: "–p" is an unknown key
# sysctl -p
1.1.7、配置会话限制
# vi /etc/pam.d/login ##末尾添加
session required pam_limits.so
1.1.8、软件安装用户的资源限制
# vi /etc/security/limits.conf
oracle hard nproc 204800
oracle soft nofile 204800
oracle hard nofile 204800
oracle soft stack 204800
grid soft nproc 204800
grid hard nproc 204800
grid soft nofile 204800
grid hard nofile 204800
grid soft stack 204800
1.1.9、创建组，创建用户，修改环境变量
# groupadd -g 1000 oinstall
# groupadd -g 1200 asmadmin
# groupadd -g 1201 asmdba
# groupadd -g 1202 asmoper
# useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper -d /home/grid -s /bin/bash grid
# passwd
# vi /home/grid/.bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
export PATH=$PATH:$HOME/bin
export PS1="`/bin/hostname -s`->"
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
# source /home/grid/.bash_profile
# groupadd -g 1300 dba
# groupadd -g 1301 oper
# useradd -u 1101 -g oinstall -G dba,oper,asmdba -d /home/oracle -s /bin/bash oracle
# passwd
# vi /home/oracle/.bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
export PATH=$PATH:$HOME/bin
export PS1="`/bin/hostname -s`->"
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_HOSTNAME=node1.localdomain
export ORACLE_SID=devdb1
export ORACLE_UNQNAME=devdb
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
# source /home/oracle/.bash_profile
1.1.10、创建目录,修改权限
# mkdir -p /u01/app/grid ##-p级联
# mkdir -p /u01/app/11.2.0/grid
# chown -R grid:oinstall /u01/app/grid
# chown -R grid:oinstall /u01/app/11.2.0/grid
# mkdir -p /u01/app/oracle
# chown -R oracle:oinstall /u01/app/oracle
最后执行如下命令:
# chmod -R 775 /u01
1.1.11、停止ntp服务,11gR2新增的检查项
# service ntpd status
ntpd is stopped
# chkconfig ntpd off
#
# mv /etc/ntp.conf /etc/ntp.conf.bak
1.2、配置node2
在node2上，重复node1的1.2-1.11，同时配置环境变量时+ASM2/devdb2
1.3、配置grid/oracle用户ssh对等性
##node1
node1->env |grep ORA
ORACLE_UNQNAME=devdb
ORACLE_SID=devdb1
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=node1.localdomain
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
##node2
node2->env |grep ORA
ORACLE_UNQNAME=devdb
ORACLE_SID=devdb2
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=node1.localdomain
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
在集群就绪服务 (CRS) 和 RAC 安装过程中，Oracle Universal Installer (OUI) 必须能够以 oracle 的身份将软件复制到所有 RAC 节点
而不提示输入口令
##node1
# su - oracle
node1->mkdir ~/.ssh
node1-> chmod 700 ~/.ssh
node1->ssh-keygen -t rsa ##一路回车
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
1f:a5:6f:8b:c9:e9:a3:04:4d:99:27:6a:3d:77:4d:1e oracle@node1.localdomain
node1->ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_dsa.
Your public key has been saved in /home/oracle/.ssh/id_dsa.pub.
The key fingerprint is:
fc:83:1c:73:37:52:50:90:50:aa:8b:41:9f:61:b9:6b oracle@node1.localdomain
##node2
# su - oracle
node2->mkdir ~/.ssh
node2->chmod 700 ~/.ssh
node2->ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
e9:fd:b0:9b:1e:57:56:07:51:9c:2e:99:33:dc:0d:03 oracle@node2.localdomain
node2->ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_dsa.
Your public key has been saved in /home/oracle/.ssh/id_dsa.pub.
The key fingerprint is:
67:f7:9a:09:e1:9e:c2:4f:6b:9a:e3:71:ce:c4:eb:08 oracle@node2.localdomain
##回到node1
node1->cd ~
node1->ll -a
node1->cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
node1->cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
node1->ssh node2 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
The authenticity of host 'node2 (192.168.0.4)' can't be established.
RSA key fingerprint is 36:5f:59:0d:52:d3:24:68:7d:60:59:da:10:37:b1:47.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'node2,192.168.0.4' (RSA) to the list of known hosts.
oracle@node2's password:
node1->ssh node2 cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
oracle@node2's password:
*****把公钥文件拷贝到node2
node1->scp ~/.ssh/authorized_keys node2:~/.ssh/authorized_keys
oracle@node2's password:
authorized_keys 100% 2040 2.0KB/s 00:00
##验证oracle用户对等性
每个节点执行如下命令，第二次执行时不再需要输入口令
ssh node1 date
ssh node2 date
ssh node1-priv date
ssh node2-priv date
ssh node1.localdomain date
ssh node2.localdomain date
ssh node1-priv.localdomain date
ssh node2-priv.localdomain date
根据以上方法，grid用户配置对等性
1.4、配置共享磁盘
C:\Program Files (x86)\VMware\VMware Workstation>vmware-vdiskmanager.exe -c -s 0.5GB -a lsilogic -t 2 "F:\Virtual Machines\share disk\OCRDISK.vmdk"
C:\Program Files (x86)\VMware\VMware Workstation>vmware-vdiskmanager.exe -c -s 0.5GB -a lsilogic -t 2 "F:\Virtual Machines\share disk\VOTINGDISK.vmdk"
C:\Program Files (x86)\VMware\VMware Workstation>vmware-vdiskmanager.exe -c -s 3GB -a lsilogic -t 2 "F:\Virtual Machines\share disk\ASMDISK1.vmdk"
C:\Program Files (x86)\VMware\VMware Workstation>vmware-vdiskmanager.exe -c -s 3GB -a lsilogic -t 2 "F:\Virtual Machines\share disk\ASMDISK2.vmdk"
C:\Program Files (x86)\VMware\VMware Workstation>vmware-vdiskmanager.exe -c -s 3GB -a lsilogic -t 2 "F:\Virtual Machines\share disk\ASMFLASH.vmdk"
F:\Virtual Machines\node2\node2.vmx，使用ultraedit编辑，保存退出，启动node2，只能启动1块硬盘
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
scsi1.sharedBus = "virtual"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "F:\Virtual Machines\share disk\OCRDISK.vmdk"
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
scsi1:1.present = "TRUE"
scsi1:1.fileName = "F:\Virtual Machines\share disk\VOTINGDISK.vmdk"
scsi1:1.mode = "independent-persistent"
scsi1:1.deviceType = "disk"
scsi2:0.present = "TRUE"
scsi2:0.fileName = "F:\Virtual Machines\share disk\ASMDISK1.vmdk"
scsi2:0.mode = "independent-persistent"
scsi2:0.deviceType = "disk"
scsi2:1.present = "TRUE"
scsi2:1.fileName = "F:\Virtual Machines\share disk\ASMDISK2.vmdk"
scsi2:1.mode = "independent-persistent"
scsi2:1.deviceType = "disk"
scsi2:2.present = "TRUE"
scsi2:2.fileName = "F:\Virtual Machines\share disk\ASMFLASH.vmdk"
scsi2:2.mode = "independent-persistent"
scsi2:2.deviceType = "disk"
scsi1.virtualDev = "lsilogic"
修改为：可以启动6个硬盘
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
scsi1.sharedBus = "virtual"
scsi1.present = "TRUE"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "F:\Virtual Machines\share disk\OCRDISK.vmdk"
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
scsi1:1.present = "TRUE"
scsi1:1.fileName = "F:\Virtual Machines\share disk\VOTINGDISK.vmdk"
scsi1:1.mode = "independent-persistent"
scsi1:1.deviceType = "disk"
scsi1:2.present = "TRUE"
scsi1:2.fileName = "F:\Virtual Machines\share disk\ASMDISK1.vmdk"
scsi1:2.mode = "independent-persistent"
scsi1:2.deviceType = "disk"
scsi1:3.present = "TRUE"
scsi1:3.fileName = "F:\Virtual Machines\share disk\ASMDISK2.vmdk"
scsi1:3.mode = "independent-persistent"
scsi1:3.deviceType = "disk"
scsi1:4.present = "TRUE"
scsi1:4.fileName = "F:\Virtual Machines\share disk\ASMFLASH.vmdk"
scsi1:4.mode = "independent-persistent"
scsi1:4.deviceType = "disk"
scsi1.virtualDev = "lsilogic"
# fdisk -l ##6个硬盘
1.5、安装rpm包，配置asm磁盘
1、格式化分区（两个节点任选其一）
2、安装asm包（每个节点）
# rpm -ivh kmod-oracleasm-2.0.6.rh1-3.el6.x86_64.rpm
# rpm -ivh oracleasm-support-2.1.8-1.el5.x86_64.rpm
# rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm
# oracleasm configure -i
# oracleasm init
3、清理asm磁盘头
# dd if=/dev/zero of=/dev/sdb1 bs=8192 count=12800
12800+0 records in
12800+0 records out
104857600 bytes (105 MB) copied, 2.18097 s, 48.1 MB/s
# dd if=/dev/zero of=/dev/sdc1 bs=8192 count=12800
12800+0 records in
12800+0 records out
104857600 bytes (105 MB) copied, 1.29817 s, 80.8 MB/s
# dd if=/dev/zero of=/dev/sdd1 bs=8192 count=12800
12800+0 records in
12800+0 records out
104857600 bytes (105 MB) copied, 1.31786 s, 79.6 MB/s
# dd if=/dev/zero of=/dev/sde1 bs=8192 count=12800
12800+0 records in
12800+0 records out
104857600 bytes (105 MB) copied, 1.43146 s, 73.3 MB/s
# dd if=/dev/zero of=/dev/sdf1 bs=8192 count=12800
4、映射分区到asm磁盘（两个节点任选其一）
# oracleasm scandisks ##刷新asm磁盘信息，不然不是最新信息
# oracleasm createdisk VOL1 /dev/sdb1
Writing disk header: done
Instantiating disk: done
# oracleasm createdisk VOL2 /dev/sdc1
Writing disk header: done
Instantiating disk: done
# oracleasm createdisk VOL3 /dev/sdd1
Writing disk header: done
# oracleasm createdisk VOL4 /dev/sde1
Writing disk header: done
Instantiating disk: done
# oracleasm createdisk VOL5 /dev/sdf1
5、关闭NetworkManager
# chkconfig --level 123456 NetworkManager off
# service NetworkManager stop
Stopping NetworkManager daemon: [ OK ]
1.6、安装 cvuqdisk包，验证grid环境，并修复failed
1、安装cvuqdisk(每个节点)
# CVUQDISK_GRP=oinstall; export CVUQDISK_GRP
# rpm -qa |grep cvuqdisk
cvuqdisk-1.0.9-1.x86_64
# ll /home/grid/grid/rpm
total 12
-rwxr-xr-x 1 root root 8551 Sep 22 2011 cvuqdisk-1.0.9-1.rpm
# ls -l /usr/sbin/cvuqdisk
-rwsr-xr-x 1 root oinstall 10928 Sep 4 2011 /usr/sbin/cvuqdisk
2、验证grid环境
node1->find /home/grid/grid/ -name runcluvfy.sh
/home/grid/grid/runcluvfy.sh
Checking ASMLib configuration.
Node Name Status
------------------------------------ ------------------------
node1 passed
node2 (failed) ASMLib does not list the disks "[VOL2, VOL1, VOL5, VOL4, VOL3]"
node1->./runcluvfy.sh stage -pre crsinst -fixup -n node1,node2 -verbose >> /home/grid/runcluvfy.check
Check: Package existence for "sysstat"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
node2 missing sysstat-5.0.5 failed
node1 missing sysstat-5.0.5 failed
Result: Package existence check failed for "sysstat"
Check: Package existence for "pdksh"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
node2 missing pdksh-5.2.14 failed
node1 missing pdksh-5.2.14 failed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf"
Checking all nodes to make sure that search entry is "localdomain" as found on node "node2"
All nodes of the cluster have same value for 'search'
Checking DNS response time for an unreachable node
Node Name Status
------------------------------------ ------------------------
node2 failed
node1 failed
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: node2,node1
（1）其他节点必须执行oracleasm scandisks
# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk "VOL1"
Instantiating disk "VOL3"
Instantiating disk "VOL2"
Instantiating disk "VOL4"
Instantiating disk "VOL5"
# oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
VOL5
（2）可以不安装sysstat
# yum --disablerepo=* --enablerepo=c6-media install sysstat -y
（3）卸载ksh安装pdksh
# yum --disablerepo=* --enablerepo=c6-media install pdksh
Loaded plugins: fastestmirror, refresh-packagekit
Loading mirror speeds from cached hostfile
c6-media | 4.0 kB 00:00 ...
Setting up Install Process
No package pdksh available.
Error: Nothing to do
# rpm -e ksh-20120801-10.el6.x86_64
# rpm -ivh pdksh-5.2.14-30.x86_64.rpm
warning: pdksh-5.2.14-30.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 73307de6: NOKEY
Preparing... ########################################### [100%]
1:pdksh ########################################### [100%]
（3）PRVF-5636和PRVF-5637，rhel6以上版本的bug引起的，11.2.0.4修复
# sed -i 's/recursion yes/recursion no/1' /etc/named.conf ##解决PRVF-5636
# service named restart
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf"
Checking all nodes to make sure that search entry is "localdomain" as found on node "node2"
All nodes of the cluster have same value for 'search'
Checking DNS response time for an unreachable node
Node Name Status
------------------------------------ ------------------------
node2 failed
node1 failed
PRVF-5637 : DNS response time could not be checked on following nodes: node2,node1
##添加段
# sed -i 's/allow-query { any; };/&\n\ allow-query-cache\ { any; };/' /etc/named.conf ##解决PRVF-5637
# vi /etc/named.conf ##仅修改3行
allow-query { any; };
allow-query-cache { any; };
recursion no;
# service named restart
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf"
Checking all nodes to make sure that search entry is "localdomain" as found on node "node2"
All nodes of the cluster have same value for 'search'
Checking DNS response time for an unreachable node
Node Name Status
------------------------------------ ------------------------
node2 passed
node1 passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
1.7、重启虚拟机，建立虚拟机快照
（1）查看resolv.conf
关闭NetworkManager后，不再冲突
（2）查看asm磁盘是否挂载
自动
（3）配置named自启动
# chkconfig --level 345 named on
（4）清空/tmp
（4）./runcluvfy.sh stage -pre crsinst -fixup -n node1,node2 -verbose
2、开始安装grid
- centos6.5 x86_64安装oracle 11.2.0.3grid
- Centos6.5 x86_64下 静默安装Oracle 11g R2
- CentOS6.5 x86_64 用 yum 安装 git
- centos6.5（x86_64）下ITK4.5.1安装
- Centos6.5 x86_64系统安装kvm虚拟机—基础篇
- centos6.5 x86_64系统安装docker之前做的准备
- centos6.5 oracle安装
- [2013-05-15]安装centos6.3-x86_64
- centos6.4-x86_64-binDVD1安装教程
- centos6.5安装oracle 11
- CentOs6.5 Oracle静默安装
- centos 6.4 安装oracle 11.2.0.3 grid报错
- OracleLinux-R7-U1-Server-x86_64下安装oracle-11.2.0.4.0_linux_x86和x86_64
- centos6.5安装mysql-advanced-5.7.9-linux-glibc2.5-x86_64.tar.gz为mysql service
- CentOS6.5下安装mysql-5.7.18-linux-glibc2.5-x86_64
- 64位centos6.7安装mysql-5.7.9-linux-glibc2.5-x86_64.tar.gz
- 64位centos6安装mysql-5.7.13-linux-glibc2.5-x86_64.tar.gz
- 64位centos6.7安装mysql-5.7.9-linux-glibc2.5-x86_64.tar.gz
- Struts session
- HttpAsyncClient 介绍
- java 后台构造http转发请求
- Struts2 之addActionError的使用
- Linux网卡绑定探析
- centos6.5 x86_64安装oracle 11.2.0.3grid
- 一个屌丝程序员对项目测试一些想法
- JavaScript实现下拉菜单（鼠标、键盘操作）
- silent install oracle 11.2.0.1 x86_64 for linux
- android 异步任务的用法详解
- mysql忘记密码怎么办？
- 解决vsftpd的refusing to run with writable root inside chroot错误
- 关于mysql处理百万级以上的数据时如何提高其查询速度的方法
- VB.NET可选参数调用方式解析
