如何在CentOS 6.4上安装并使用OpenVZ
来源:互联网 发布:信捷plc流程梯图编程 编辑:程序博客网 时间:2024/05/01 07:06
如何在CentOS 6.4上安装并使用OpenVZ?
OpenVZ是Virtuozzo的开源分支,在OpenVZ的帮助下,大家可以在同一套硬件上获得多套虚拟私有服务器(简称VPS),本文中,将向大家介绍如何为OpenVZ创建一套CentOS 6.4服务器。
AD:WOT2014:用户标签系统与用户数据化运营培训专场
【51CTO精选译文】在本篇指导文章中,我将向大家介绍如何为OpenVZ创建一套CentOS 6.4服务器。在OpenVZ的帮助下,大家可以在同一套硬件上获得多套虚拟私有服务器(简称VPS),这跟Xen以及Linux Vserver项目颇为相似。OpenVZ是Virtuozzo的开源分支,作为家族长辈,Virtuozzo以商业虚拟化方案的姿态出现在很多提供虚拟服务器业务的供应商处。OpenVZ内核补丁以GPL许可为基础,而用户层工具则基于QPL许可。
由于采取实用性指南的定位,这篇文章不会包含任何理论背景知识。网络上背景知识方面的资源已经非常丰富,这里我们就不再赘述。这份文档不向大家提供任何效果保证,仅仅作为参考性材料存在。以下流程是否实际生效需视具体情况而定。
安装OpenVZ
要完成OpenVZ的安装工作,我们需要先把OpenVZ库添加到yum当中:
cd /etc/yum.repos.dwget http://download.openvz.org/openvz.reporpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ
现在打开openvz.repo文件:
vi openvz.repo
接下来禁用[openvz-kernel-rhel5]库(enabled=0)并启用[openvz-kernel-rhel6]库作为替代(enabled=1):
[...][openvz-kernel-rhel6]name=OpenVZ RHEL6-based kernel#baseurl=http://download.openvz.org/kernel/branches/rhel6-2.6.32/current/mirrorlist=http://download.openvz.org/kernel/mirrors-rhel6-2.6.32enabled=1gpgcheck=1gpgkey=http://download.openvz.org/RPM-GPG-Key-OpenVZ[openvz-kernel-rhel5]name=OpenVZ RHEL5-based kernel#baseurl=http://download.openvz.org/kernel/branches/rhel5-2.6.18/current/mirrorlist=http://download.openvz.org/kernel/mirrors-rhel5-2.6.18enabled=0gpgcheck=1gpgkey=http://download.openvz.org/RPM-GPG-Key-OpenVZ[...]
这套库中包含多种OpenVZ内核(欲了解不同内核的具体情况,请访问http://wiki.openvz.org/Kernel_flavors进行查看)。以下命令:
yum search vzkernel
将在屏幕上列出所有可用内核:
[root@server1 yum.repos.d]# yum search vzkernel[...]vzkernel.i686 : The Linux kernelvzkernel.x86_64 : The Linux kernelvzkernel-devel.i686 : Development package for building kernel modules to match the kernelvzkernel-devel.x86_64 : Development package for building kernel modules to match the kernelvzkernel-firmware.noarch : Firmware files used by the Linux kernelvzkernel-headers.i686 : Header files for the Linux kernel for use by glibcvzkernel-headers.x86_64 : Header files for the Linux kernel for use by glibc[...][root@server1 yum.repos.d]#
选择其中之一,并按如下命令进行安装:
yum install vzkernel
这一操作应该也会自动更新GRUB引导程序。无论如何,我们现在要打开/boot/grub/menu.lst;现在首个内核中应该已经包含有新的OpenVZ内核了。务必确保default值为0,这样首个内核(也就是OpenVZ内核)才会被自动引导并替换掉默认的CentOS内核。
vi /boot/grub/menu.lst# grub.conf generated by anaconda# Note that you do not have to rerun grub after making changes to this file# NOTICE: You have a /boot partition. This means that# all kernel and initrd paths are relative to /boot/, eg# root (hd0,0)# kernel /vmlinuz-version ro root=/dev/mapper/vg_server1-lv_root# initrd /initrd-[generic-]version.img#boot=/dev/sdadefault=0timeout=5splashimage=(hd0,0)/grub/splash.xpm.gzhiddenmenutitle OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/mapper/vg_server1-lv_root rd_LVM_LV=vg_server1/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=de rd_LVM_LV=vg_server1/lv_swap rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-042stab057.1.imgtitle CentOS (2.6.32-279.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.el6.x86_64 ro root=/dev/mapper/vg_server1-lv_root rd_LVM_LV=vg_server1/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=de rd_LVM_LV=vg_server1/lv_swap rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-279.el6.x86_64.img
现在我们需要安装几款OpenVZ用户工具:
yum install vzctl vzquota
打开/etc/sysctl.conf并确保文件中包含以下设定:
vi /etc/sysctl.conf[...]net.ipv4.ip_forward = 1net.ipv4.conf.default.proxy_arp = 0net.ipv4.conf.all.rp_filter = 1kernel.sysrq = 1net.ipv4.conf.default.send_redirects = 1net.ipv4.conf.all.send_redirects = 0net.ipv4.icmp_echo_ignore_broadcasts=1net.ipv4.conf.default.forwarding=1[...]
如果大家需要对/etc/sysctl.conf进行修改,请在上述命令后添加以下内容:
sysctl -p
如果大家的虚拟机IP地址来自不同子网而非直接采用主机系统的IP地址,那么接下来的步骤非常关键。如果忽略这一步,网络将无法在虚拟机上正常工作。
打开/etc/vz/vz.conf 并将NEIGHBOUR_DEVS 设置为 all:
vi /etc/vz/vz.conf[...]NEIGHBOUR_DEVS=all[...]
如果大家想让OpenVZ正常工作,那么SELinux必须被禁用。打开/etc/sysconfig/selinux 并将SELINUX 的值设为disabled:
vi /etc/sysconfig/selinux# This file controls the state of SELinux on the system.# SELINUX= can take one of these three values:# enforcing - SELinux security policy is enforced.# permissive - SELinux prints warnings instead of enforcing.# disabled - No SELinux policy is loaded.SELINUX=disabled# SELINUXTYPE= can take one of these two values:# targeted - Targeted processes are protected,# mls - Multi Level Security protection.SELINUXTYPE=targeted
最后,重新启动系统:
reboot
如果大家的系统顺利完成了重启,那么恭喜--安装工作成功结束!
运行:
uname -r
这时我们的新OpenVZ内核应该显示以下内容:
[root@server1 ~]# uname -r2.6.32-042stab057.1[root@server1 ~]#
在利用OpenVZ创建虚拟机之前,我们需要在/vz/template/cache目录下为所要用到的发行版添加一套模板,这套模板将负责虚拟机的生成工作。大家可以在以下地址中找到预创建模板清单:http://wiki.openvz.org/Download/template/precreated)。
我打算在自己的虚拟机中使用CentOS 6,所以我需要下载CentOS 6模板:
cd /vz/template/cachewget http://download.openvz.org/template/precreated/centos-6-x86_64.tar.gz
现在我要向大家展示使用OpenVZ所涉及的基本命令。
要通过CentOS 6模板建立一套VPS,需要运行:
vzctl create 101 --ostemplate centos-6-x86_64 --config basic
这里的101必须是单独ID--每套虚拟机都需要拥有专属的独立ID。大家可以利用虚拟机IP地址的最后三位数字来为其命名。举例来说,如果虚拟机IP地址为192.168.0.101,那么其ID为101即可。
如果大家希望在系统启动时自动运行虚拟机,则执行以下命令:
vzctl set 101 --onboot yes --save
要为虚拟机设定主机名称与IP地址,则运行以下命令:
vzctl set 101 --hostname test.example.com --savevzctl set 101 --ipadd 192.168.0.101 --save
接下来我们将套接口数量设置为120,并为虚拟机指派数个域名服务器:
vzctl set 101 --numothersock 120 --savevzctl set 101 --nameserver 8.8.8.8 --nameserver 8.8.4.4 --nameserver 145.253.2.75 --save
(请注意,这里我们也可以使用vzctl set命令或者直接对/etc/vz/conf目录下的虚拟机配置文件进行编辑。如果虚拟机ID为 101, 那么配置文件的路径应为/etc/vz/conf/101.conf。)
运行以下命令来启动虚拟机:
vzctl start 101
执行以下命令为虚拟机设定root密码:
vzctl exec 101 passwd
大家现在已经可以通过SSH(例如PuTTY)或者手动输入以下命令的方式与虚拟机连通:
vzctl enter 101
是退出虚拟机控制台,可直接输入:
exit
停止虚拟机运行,运行:
vzctl stop 101
重启虚拟机则运行:
vzctl restart 101
如果需要从磁盘中删除虚拟机(前提是我们已经停止了该虚拟机的运行),执行以下命令:
vzctl destroy 101
要列出当前虚拟机清单及其运行状态,需运行:
vzlist -a[root@server1 cache]# vzlist -a CTID NPROC STATUS IP_ADDR HOSTNAME 101 14 running 192.168.0.101 test.example.com[root@server1 cache]#
要查看被指派给对应虚拟机的资源,需运行:
vzctl exec 101 cat /proc/user_beancounters[root@server1 cache]# vzctl exec 101 cat /proc/user_beancountersVersion: 2.5 uid resource held maxheld barrier limit failcnt 101: kmemsize 1508202 1661695 11055923 11377049 0 lockedpages 0 0 256 256 0 privvmpages 5430 7102 65536 69632 0 shmpages 381 381 21504 21504 0 dummy 0 0 0 0 0 numproc 19 21 240 240 0 physpages 2489 2775 0 2147483647 0 vmguarpages 0 0 33792 2147483647 0 oomguarpages 2489 2775 26112 2147483647 0 numtcpsock 5 5 360 360 0 numflock 3 4 188 206 0 numpty 0 1 16 16 0 numsiginfo 0 2 256 256 0 tcpsndbuf 44720 0 1720320 2703360 0 tcprcvbuf 81920 0 1720320 2703360 0 othersockbuf 13144 14356 1126080 2097152 0 dgramrcvbuf 0 8380 262144 262144 0 numothersock 11 13 120 120 0 dcachesize 0 0 3409920 3624960 0 numfile 503 531 9312 9312 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 10 10 128 128 0[root@server1 cache]#
failcnt这一列的信息非常重要,正常来说所有数值都应该为0;如果出现非0数字,则代表当前虚拟机所拥有的资源不足、我们需要为其分配更多资源。打开/etc/vz/conf目录下的虚拟机配置文件,提高对应资源数量,最后重新启动虚拟机。
如果大家还需要进行其它操作,可以运行下列命令以查看vzctl的所有操作指令:
man vzctlyuanwendizhi:http://os.51cto.com/art/201304/387720.htm
- 如何在CentOS 6.4上安装并使用OpenVZ
- 在centos上安装smb并使用
- 如何在CentOS上安装并汉化Code::Blocks
- 如何在CentOS上安装并汉化Code::Blocks
- 如何在CentOS 7上安装和使用Docker
- 在虚拟机上安装centos并配置
- 如何在OpenVZ下安装管理软件HyperVM 建立VPS服务
- 如何在windows上安装并使用git.
- 如何在Ubuntu 14.04服务器上安装并使用Graphite
- 如何在windows上安装并使用slate
- 如何在CentOS 7服务器上利用Apache安装并保护phpMyAdmin
- 如何安装Python 3并在CentOS 7上建立本地编程环境
- 如何在centos上安装epel源
- 在centos上如何安装git
- 如何在CentOS上安装EPEL源
- 如何在centos上安装telnet
- 如何在CentOS 7上安装MySQL
- 如何在Centos 6上安装Wordpress?
- CocoaPods安装
- Android ActionBar完全解析,使用官方推荐的最佳导航栏(上)
- “黑马程序员”学习java基础的第一天
- LINUX 网络协议栈实现分析-SKBUFF 的实现
- Freelancer 之潮:自由职业市场的崛起
- 如何在CentOS 6.4上安装并使用OpenVZ
- python 中Dict 转 Json
- sparse bundle adjustment 摄影测量光束法平差程序库------编译
- ASP.NET MVC 过滤器(五)
- 作为一个程序员的投资
- Linux中profile、bashrc、bash_profile之间的区别和联系
- linux常用命令
- Eclipse下建立geoserver源码工程
- uva 10878 Decode the tape(字符密码推断)