IRAT Iu Handover (UTRAN to EUTRAN)
来源:互联网 发布:konect类似软件 编辑:程序博客网 时间:2024/04/30 11:51
Overview
它有四个大的步骤。
1) Decision
Serving RNC 初始化 handover并且通知Serving SGSN。
2) Preparation
Serving SGSN 会通知 目的 MME,准备Handover需要的资源。
目的MME 会初始化S-GW和eNB需要的资源。
3) Execution
目的MME在S-GW初始化并且分配Indirect Data Forwarding Path 并且通知SGSN。
Serving SGSN命令RNC进行handover
RNC命令UE handover到E-UTRAN
MME 会根据 eNB的返回 通知 SGSN 是否成功的进行了handover
MME开始进行 Bearer Modification 过程
4) Completion
释放源资源
在P-GW 更新 UE Context
IRAT Iu Handover to EUTRAN Call Flow
Decision and Preparation
1) 在此例中,UTRAN配置了measurement report。并且UE发送Measurement Report到UTRAN RNC。
2) 源RNC根据Measurement Report决定进行handover,并且发送Relocation Required 消息到Serving SGSN。消息中包含Cause,Target eNB ID,源RNC ID。
3) 源SGSN发送 Forward Relocation Required 到MME。
Preparation
4) 目的MME 向目的S-GW请求资源。目的MME发送Create Session Request 消息到目的S-GW,其中包含着PDN connection的信息。S-GW通过Create Session Response进行响应。
5) 一旦在S-GW Session建立起来了,目的MME发送Handover Request消息到目的 eNB。目的eNB通过Handover Request Acknowledge消息来响应。
Execution
6) 当eNB响应了 Handover Requst Ack后,目的MME会在与S-GW间建立一个数据转发的通道。MME 发送Create Indirect Data Forwarding Tunnel Request消息到S-GW。消息中包含到eNB每个承载的User Plane地址。
7) MME 通过发送Forward Relocation Response 到源SGSN来确认relocation。消息中包含已经建立的承载的列表。
8) 源SGSN通过发送Create Indirect Data Forwardng Tunnel Request消息到S-GW来建立indirect data 转发路径。
9) 源SGSN 发送Relocation Command 到源RNC,命令进行relocation。
10) 源RNC 发送Handover Request 到UE。 它会包含Handover需要的RAB列表。 Transparent Container中包含的信息可以使UE接入LTE 网络。
11) UE响应Handover 命令,从UTRAN 转移到E-UTRAN,收集system information 并且执行随机接入过程。当接入完成后,UE发送RRCReconfigurationComplete来确认handover。
Completion
12) Target eNB 通过发送 Handover Notify 到MME 消息确认handover。 它包含Tracking Area Indicatoer 和 E-UTRAN cell Global ID。
13) MME通知 SGSN relocation 成功了,并且使用消息Path Switch Request Ack 确认路径转换成功。
14) 目的SGSN通过消息Forward Relocation Complete Acknowledgement 来响应relocation。
15) 得到handover 确认后,MME通知目的S-GW handover 完成。
16) S-GW 发送消息 Modify Bearer Request 通知 P-GW承载发生了变化,消息中包含S-GW Downlink 地址。
17) 目的S-GW通知MME承载变化成功。
18) 源SGSN释放和S-GW 以及 RNC相关的资源。SGSN向S-GW和RNC分别发送Delete Session Response 以及 Iu Release消息。S-GW会返回Delete Session Response。
19) 目的MME通知S-GW删除数据转发通道。
- IRAT Iu Handover (UTRAN to EUTRAN)
- IRAT Iu Handover (E-UTRAN to UTRAN) Call Flow
- IU
- 关于解决 Failed to prepare partial IU:
- eclipse安装插件是报错 Failed to prepare partial IU: [R]
- eclipse 安装 Fatjar 报错Failed to prepare partial IU
- Eclipse安装FatJar插件提示Failed to prepare partial IU
- zoj1045-HandOver
- UMTS Performance Measurement: A Practical Guide to KPIs for the UTRAN Environment
- how to understand TSs – S1 handover with MME and SGW relocation and Indirect Tunneling
- how to understand TSs – S1 handover with MME and SGW relocation and Indirect Tunneling
- IU卡片
- Zend Studio 10 安装插件时failed to prepare partial IU
- Failed to prepare partial IU: [R]com.googlecode.veloeclipse.ui 2.0.8
- Eclipse4.4安装旧版本插件报错 Failed to prepare partial IU
- Eclipse4.4安装旧版本插件报错 Failed to prepare partial IU
- Failed to prepare partial IU: [R]com.googlecode.veloeclipse.ui 2.0.8
- Eclipse4.4安装旧版本插件报错 Failed to prepare partial IU
- 林毅夫、张维迎先生之争让人失望
- halcon中通过字体确定图片的位姿的例子
- 简单易学的机器学习算法——Rosenblatt感知机的对偶解法
- UVA 107 (暑假-数学 -E - The Cat in the Hat)
- Android动画之弹球落地效果
- IRAT Iu Handover (UTRAN to EUTRAN)
- 寒城攻略:Listo 教你 25 天学会 Swift 语言 - 01 About Swift
- POJ3278 - Catch That Cow - 广度优先搜索
- 虚拟机网卡设置
- HDU 3081Marriage Match II(二分+并查集+网络流之最大流)
- Android中获取系统内存信息以及进程信息-----ActivityManager的使用
- 769 乘数密码
- UVA 573 (暑假-数学 -F - The Snail)
- 寒城攻略:Listo 教你 25 天学会 Swift 语言 - 02 Swift Tour