UBUNTU下使用ifconfig和route命令…
来源:互联网 发布:超级软件txt下载 编辑:程序博客网 时间:2024/05/18 13:05
UBUNTU下使用ifconfig和route命令手动配置网络
LINUX下的网络配置命令是ifconfig类似于WINDOWS命令行中的ipconfig。可以使用ifconfig命令来配置并查看网络接口的配置情况。
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0 192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
Ubuntu命令行下的网络配置
编辑/etc/network/interface文件如下先添加
引用:
auto lo
iface lo inet loopback
auto eth0
如果是自动获取ip,添加
引用:
iface eth0 inet dhcp
如果是手动配置ip,添加
引用:
iface eth0 inet static
address xxx.xxx.xxx.xxx
netmask xxx.xxx.xxx.xxx
network xxx.xxx.xxx.xxx
boardcast xxx.xxx.xxx.xxx
gateway xxx.xxx.xxx.xxx本文出自51CTO.COM技术博客
LINUX下的网络配置命令是ifconfig类似于WINDOWS命令行中的ipconfig。可以使用ifconfig命令来配置并查看网络接口的配置情况。
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0 192.168.1.3
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
例如:
(1) 配置eth0的IP地址, 同时激活该设备。
#ifconfig eth0 192.168.1.10 netmask 255.255.255.0 up
(2) 配置eth0别名设备eth0:1的IP地址,并添加路由。
#ifconfig eth0
#route add –host 192.168.1.3 dev eth0:1
(3) 激活设备。
#ifconfig eth0 up
(4) 禁用设备。
#ifconfig eth0 down
(5) 查看指定的网络接口的配置。
#ifconfig eth0
(6) 查看所有的网络接口配置。
#ifconfig
2、 route
可以使用route命令来配置并查看内核路由表的配置情况。
例如:
(1) 添加到主机的路由。
#route add –host 192.168.1.2 dev eth0:0
#route add –host 10.20.30.148 gw 10.20.30.40
(2) 添加到网络的路由。
#route add –net 10.20.30.40 netmask 255.255.255.248 eth0
#route add –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route add –net 192.168.1.0/24 eth1
(3) 添加默认网关。
#route add default gw 192.168.1.1
(4) 查看内核路由表的配置。
#route
(5)删除路由。
#route del –host 192.168.1.2 dev eth0:0
#route del –host 10.20.30.148 gw 10.20.30.40
#route del –net 10.20.30.40 netmask 255.255.255.248 eth0
#route del –net 10.20.30.48 netmask 255.255.255.248 gw10.20.30.41
#route del –net 192.168.1.0/24 eth1
#route del default gw 192.168.1.1
对于1和2两点可使用下面的语句实现:
Ifconfig eth0 172.16.19.71 netmask 255.255.255.0
Route 0.0.0.0 gw 172.16.19.254
Service network restart
3、 traceroute
可以使用traceroute命令显示数据包到达目的主机所经过的路由。
例如:
#traceroute x
4、 ping
可以使用ping 命令来测试网络的连通性。
例如:
#ping x
#ping –c 4 192.168.1.12
5、 netstat
可以使用netstat命令来显示网络状态信息。
例如:
(1) 显示网络接口状态信息。
#netstat –i
(2) 显示所有监控中的服务器的Socket和正使用Socket的程序信息。
#netstat –lpe
(3) 显示内核路由表信息。
#netstat –r
#netstat –nr
(4) 显示TCP/UDP传输协议的连接状态。
#netstat –t
#netstat –u
6、 hostname
可以使用hostname命令来更改主机名。例如;
#hostname myhost
7、 arp
可以使用arp命令来配置并查看arp缓存。例如:
(1) 查看arp缓存。
#arp
(2) 添加一个IP地址和MAC地址的对应记录。
#arp –s 192.168.33.15 00:60:08:27:CE:B2
(3) 删除一个IP地址和MAC地址的对应缓存记录。
#arp –d192.168.33.15
Ubuntu命令行下的网络配置
编辑/etc/network/interface文件如下先添加
引用:
auto lo
iface lo inet loopback
auto eth0
如果是自动获取ip,添加
引用:
iface eth0 inet dhcp
如果是手动配置ip,添加
引用:
iface eth0 inet static
address xxx.xxx.xxx.xxx
netmask xxx.xxx.xxx.xxx
network xxx.xxx.xxx.xxx
boardcast xxx.xxx.xxx.xxx
gateway xxx.xxx.xxx.xxx
0 0
- UBUNTU下使用ifconfig和route命令…
- UBUNTU下使用ifconfig和route命令手动配置网络
- UBUNTU下使用ifconfig和route命令 配置网络
- linux网络配置命令之ifconfig、ip和route
- linux网络配置命令之ifconfig、ip和route
- linux网络配置命令之ifconfig、ip和route
- Linux shell 命令 -- route, ifconfig
- ux shell命令,route,ifconfig
- linux下route命令使用
- linux 网络设置 命令 ifconfig route
- linux下ifconfig, DNS以及route配置
- linux下ifconfig, DNS以及route配置
- linux下ifconfig, DNS以及route配置
- linux下ifconfig, DNS以及route配置
- ifconfig route
- 网络基础知识、linux路由管理命令(route) 、ip命令、ifconfig命令的使用、linux网卡配置
- Linux下找不到IFCONFIG命令---ifconfig
- Docker的ubuntu镜像无ifconfig和ping命令 bash: ifconfig: command not found
- 广播,单播,组播
- 【PAT (Advanced Level)】1011. World Cup Betting (20)
- 关于使用UDP套接字进行本地进程间…
- linux c控制cpu利用率
- 20130704_TWNIC_Nagios_Ezilla_openSUSE12.2
- UBUNTU下使用ifconfig和route命令…
- 解决最优子结构问题的两种方法----…
- android自定义 dialog
- KMP算法的理解,伪代码,c代码实现
- static变量和extern变量
- 关于头文件,全局变量,extern,st…
- Android 更新UI的两种方法——handler和runOnUiThread()
- C++笔记
- C++复习