poj2031Building a Space Station(最小生成树prim)
来源:互联网 发布:mysql查询重复数据优化 编辑:程序博客网 时间:2024/05/22 11:34
题目链接:
啊哈哈,点我点我
题意:
就是空间站之间有很多球形的东西,然后这些球可能相交,如果相加那么距离为0,否则距离为两球表面的距离,最后求联通这些球形实验室所需要的最小距离。。。
思路:
相信大家都学过圆相交吧,类推到球是一样的,当两球的距离大于两球的半径之和的时候,说明两球不想交,反之则两球相交,转换成公式为d-(r1+r2)>0则说明两球不相交。。。
建图后基本上就是套模板了。。。
思路:
相信大家都学过圆相交吧,类推到球是一样的,当两球的距离大于两球的半径之和的时候,说明两球不想交,反之则两球相交,转换成公式为d-(r1+r2)>0则说明两球不相交。。。
建图后基本上就是套模板了。。。
题目:
Building a Space Station
Time Limit: 1000MS Memory Limit: 30000KTotal Submissions: 4492 Accepted: 2293
Description
You are a member of the space station engineering team, and are assigned a task in the construction process of the station. You are expected to write a computer program to complete the task.
The space station is made up with a number of units, called cells. All cells are sphere-shaped, but their sizes are not necessarily uniform. Each cell is fixed at its predetermined position shortly after the station is successfully put into its orbit. It is quite strange that two cells may be touching each other, or even may be overlapping. In an extreme case, a cell may be totally enclosing another one. I do not know how such arrangements are possible.
All the cells must be connected, since crew members should be able to walk from any cell to any other cell. They can walk from a cell A to another cell B, if, (1) A and B are touching each other or overlapping, (2) A and B are connected by a `corridor', or (3) there is a cell C such that walking from A to C, and also from B to C are both possible. Note that the condition (3) should be interpreted transitively.
You are expected to design a configuration, namely, which pairs of cells are to be connected with corridors. There is some freedom in the corridor configuration. For example, if there are three cells A, B and C, not touching nor overlapping each other, at least three plans are possible in order to connect all three cells. The first is to build corridors A-B and A-C, the second B-C and B-A, the third C-A and C-B. The cost of building a corridor is proportional to its length. Therefore, you should choose a plan with the shortest total length of the corridors.
You can ignore the width of a corridor. A corridor is built between points on two cells' surfaces. It can be made arbitrarily long, but of course the shortest one is chosen. Even if two corridors A-B and C-D intersect in space, they are not considered to form a connection path between (for example) A and C. In other words, you may consider that two corridors never intersect.
The space station is made up with a number of units, called cells. All cells are sphere-shaped, but their sizes are not necessarily uniform. Each cell is fixed at its predetermined position shortly after the station is successfully put into its orbit. It is quite strange that two cells may be touching each other, or even may be overlapping. In an extreme case, a cell may be totally enclosing another one. I do not know how such arrangements are possible.
All the cells must be connected, since crew members should be able to walk from any cell to any other cell. They can walk from a cell A to another cell B, if, (1) A and B are touching each other or overlapping, (2) A and B are connected by a `corridor', or (3) there is a cell C such that walking from A to C, and also from B to C are both possible. Note that the condition (3) should be interpreted transitively.
You are expected to design a configuration, namely, which pairs of cells are to be connected with corridors. There is some freedom in the corridor configuration. For example, if there are three cells A, B and C, not touching nor overlapping each other, at least three plans are possible in order to connect all three cells. The first is to build corridors A-B and A-C, the second B-C and B-A, the third C-A and C-B. The cost of building a corridor is proportional to its length. Therefore, you should choose a plan with the shortest total length of the corridors.
You can ignore the width of a corridor. A corridor is built between points on two cells' surfaces. It can be made arbitrarily long, but of course the shortest one is chosen. Even if two corridors A-B and C-D intersect in space, they are not considered to form a connection path between (for example) A and C. In other words, you may consider that two corridors never intersect.
Input
The input consists of multiple data sets. Each data set is given in the following format.
n
x1 y1 z1 r1
x2 y2 z2 r2
...
xn yn zn rn
The first line of a data set contains an integer n, which is the number of cells. n is positive, and does not exceed 100.
The following n lines are descriptions of cells. Four values in a line are x-, y- and z-coordinates of the center, and radius (called r in the rest of the problem) of the sphere, in this order. Each value is given by a decimal fraction, with 3 digits after the decimal point. Values are separated by a space character.
Each of x, y, z and r is positive and is less than 100.0.
The end of the input is indicated by a line containing a zero.
n
x1 y1 z1 r1
x2 y2 z2 r2
...
xn yn zn rn
The first line of a data set contains an integer n, which is the number of cells. n is positive, and does not exceed 100.
The following n lines are descriptions of cells. Four values in a line are x-, y- and z-coordinates of the center, and radius (called r in the rest of the problem) of the sphere, in this order. Each value is given by a decimal fraction, with 3 digits after the decimal point. Values are separated by a space character.
Each of x, y, z and r is positive and is less than 100.0.
The end of the input is indicated by a line containing a zero.
Output
For each data set, the shortest total length of the corridors should be printed, each in a separate line. The printed values should have 3 digits after the decimal point. They may not have an error greater than 0.001.
Note that if no corridors are necessary, that is, if all the cells are connected without corridors, the shortest total length of the corridors is 0.000.
Note that if no corridors are necessary, that is, if all the cells are connected without corridors, the shortest total length of the corridors is 0.000.
Sample Input
310.000 10.000 50.000 10.00040.000 10.000 50.000 10.00040.000 40.000 50.000 10.000230.000 30.000 30.000 20.00040.000 40.000 40.000 20.00055.729 15.143 3.996 25.8376.013 14.372 4.818 10.67180.115 63.292 84.477 15.12064.095 80.924 70.029 14.88139.472 85.116 71.369 5.5530
Sample Output
20.0000.00073.834
Source
Japan 2003 Domestic
代码为:
#include<iostream>#include<cstdio>#include<algorithm>#include<vector>#include<cstring>#include<cmath>#define INF 10000000using namespace std;const int maxn=100+10;double dis[maxn],gra[maxn][maxn];bool vis[maxn];int n;struct Node{ double x,y,z,r;}node[maxn];void prim(){ int now; double tmp,ans=0; for(int i=1;i<=n;i++) dis[i]=INF*1.0; memset(vis,false,sizeof(vis)); dis[1]=0; for(int i=1;i<=n;i++) { tmp=1.0*INF; for(int j=1;j<=n;j++) { if(!vis[j]&&dis[j]<tmp) { tmp=dis[j]; now=j; } } vis[now]=true; ans=ans+tmp; for(int j=1;j<=n;j++) { if(!vis[j]&&dis[j]>gra[now][j]) dis[j]=gra[now][j]; } } printf("%.3lf\n",ans);}double caldistance(Node a,Node b){ return sqrt((a.x-b.x)*(a.x-b.x)+(a.y-b.y)*(a.y-b.y)+(a.z-b.z)*(a.z-b.z))-(a.r+b.r);}int main(){ double temp; while(~scanf("%d",&n),n) { for(int i=1;i<=n;i++) scanf("%lf%lf%lf%lf",&node[i].x,&node[i].y,&node[i].z,&node[i].r); for(int i=1;i<n;i++) for(int j=i+1;j<=n;j++) { temp=caldistance(node[i],node[j]); if(temp<=0) gra[i][j]=gra[j][i]=0; else gra[i][j]=gra[j][i]=temp; } prim(); } return 0;}
0 0
- POJ2031Building a Space Station (最小生成树之prim)
- poj2031Building a Space Station(最小生成树prim)
- poj2031Building a Space Station 最小生成树
- poj2031Building a Space Station(几何+最小生成树)
- POJ2031 Building a Space Station(最小生成树,prim)
- poj 2031 Building a Space Station 【最小生成树 Prim】
- Building a Space Station POJ 2031 【最小生成树 prim】
- POJ2031 Building a Space Station(最小生成树,Prim)
- Building a Space Station 最小生成树prim
- POJ Building a Space Station <最小生成树(Prim)>
- poj_2031Building a Space Station(最小生成树)
- POJ2031_Building a Space Station(最小生成树)
- Building a Space Station--最小生成树
- 【最小生成树之prim算法】POJ 2031---Building a Space Station
- Building a Space Station 2031 (三维的 最小生成树 prim)
- poj 2031 -- Building a Space Station(最小生成树)
- POJ2031--Building a Space Station--最小生成树
- <模板>poj2031 Building a Space Station(最小生成树)
- uva10106
- [AngularJS]浏览器兼容
- 2*n铺块 (大数加递归)
- 学习Hibernate--学前了解
- svn:ignore 的用处
- poj2031Building a Space Station(最小生成树prim)
- 电脑外设-煲耳机
- 随想录(qemu仿真linux kernel)
- Linux命令:date
- C#学习记录
- Linux下配置vsftp
- public ArrayList(Collection<? extends E> c)中的 ? 和 E 是什么意思
- 14.jQuery UI 编辑器插件
- 什么是GPS定位、基站定位和Wi-Fi定位?