iOS mac抓包方法

1、wireshark

   1.12版本可以用，但是越狱的机子有些也是有问题

2、packet peeper经常崩溃

3、ssh  没有试验成功

4  

• Cocoa Packet Analyzer

  5/  Debookee is a Mac OS X application which allows you 
  to see what your devices are sending over the network. 
  Along with lots of others functionalities.

6  Charles是一个抓包工具。
6.1.支持SSL。
6.2.可以限制网速。
6.3.可以看json和xml。但是其实用Google Chrome安装插件也是可以看到漂亮的格式的。
6.4.支持重发网络请求。
6.5.支持修改网络请求参数。
6.6.支持网络请求的截获并动态修改。
6.7.可以检查HTMl，CSS和RSS内容是否标准

7  putty

Installing and using Putty on a Mac or OS X is extremely easy. The following steps have been tested on Mountain Lion (OS X 10.8.2) but should work on other versions as well. For references, I used this and this. Also, if you tried installing Putty before finding this guide and got errors such as:

Error: Gtk-WARNING **: cannot open display, or
Error: port selfupdate failed,

then please refer to points 10, 11, and 12 for solutions below.

 

1. Download Xcode

This can be found at the Apple Developer Connection site, on your Mac OS X installation CDs/DVD, or in the Mac App Store.

 

2. Install Command Line Tools for Xcode

Under Xcode:

Preferences -> Downloads -> Components -> Install 'Command Line Tools'

 

3. Accept the Xcode EULA

Either launch Xcode or run:

xcodebuild -license

 

4. Download and Install MacPorts

https://distfiles.macports.org/MacPorts/MacPorts-2.1.2-10.8-MountainLion.pkg

 

5. Update MacPorts

Note: Make sure Xcode is fully installed.

sudo port -v selfupdate

 

6. Install Putty

sudo port install putty

 

7. Download and Install X11 (XQuartz)

http://xquartz.macosforge.org/landing/

 

8. Run Putty

Type ‘putty’ into Terminal:

putty

This should open Putty in an X11 window.

 

9. Desktop Shortcut for Putty

cp /opt/local/bin/putty ~/Desktop/PuTTY

 

10. Note 1

Error: Gtk-WARNING **: cannot open display:

If you get the above warning, please make sure you are using XQuartz as your X11 Emulator. Then go ahead and either restart Mac or simply log out and log back in. That should resolve the issue.

 

11. Note 2

Error: port selfupdate failed: Error installing new MacPorts base: shell command failed

If you get the above warning, please make sure you gave followed step 2 above. That would be:

Preferences -> Downloads -> Components -> Install 'Command Line Tools'

 

12. Note 3

If your error involves Xcode 4.3 and installing Putty using

sudo port install putty

This error occurs because the command line tools are installed in a different folder. You can fix the problem by copying them to the normal path:

cp Applications/Xcode.app/Contents/Developer/usr/bin/* /usr/bin/

So these steps should allow you to install and use Putty on Mac and specifically, OS X 10.8. As always, if this was helpful to you, then please do not forget to leave a comment, or two.