ti8168 eth0 启动
来源:互联网 发布:混沌之戒3修改存档数据 编辑:程序博客网 时间:2024/05/21 19:34
ti8168 原始文件系统进去后没有网络eth0接口,为了有该接口需要配置/etc/network/interfaces 文件
具体配置如下(红色要配置)
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# Wireless interfaces
#
# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid any
#
#
# Same as above but locked to a specific access point:
#
#iface wlan0 inet dhcp
# wireless_mode managed
# wireless-essid some-essid
#
# A WEP encrypted connection locked to a specific access point:
#
#iface wlan0 inet dhcp
# wireless-essid some-essid
# wireless-key s:My-PlainText-Password
# wireless-mode managed
#
# A WPA1 or WPA2 encrypted connection locked to a specific access point.
# This is the best option for non-roaming, single-network usage.
# Note that your card may require a firmware update to use WPA.
# Some distributions install a temporary volatile firmware update on ifup.
#
#iface wlan0 inet dhcp
# wpa-essid some-essid
# wpa-psk My-PlainText-Password
#
# A WPA1 or WPA2 encrypted connection using an external configuration file
# for wpa-supplicant. This is the way to go if you need to configure multiple
# networks with different keys and / or WPA settings and roaming support.
#
# iface wlan0 inet dhcp
# wpa-conf /etc/wpa_supplicant.conf
# wpa-driver hostap
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
iface eth0 inet dhcp
pre-up /bin/grep -v -e "ip=[0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+" /proc/cmdline > /dev/null
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet static
address 192.168.0.202
netmask 255.255.255.0
network 192.168.0.0
gateway 192.168.0.200
# Zaurus 2.4 Lineo net_fd; obsolete
iface usbd0 inet static
address 192.168.129.201
netmask 255.255.255.0
network 192.168.129.0
gateway 192.168.129.200
# iPAQ 2.4 mach-sa1100/usb-eth
# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP)
iface usbf inet static
address 192.168.0.202
netmask 255.255.255.0
network 192.168.0.0
gateway 192.168.0.200
# Bluetooth networking
iface bnep0 inet dhcp
ifconfig eth0 MTU 9000
- ti8168 eth0 启动
- kernel 启动后没有eth0
- redhat启动时无法激活eth0
- vmware clone linux eth0 无法启动
- linux不能启动虚拟网卡eth0
- VM下eth0端口ifup启动失败
- gentoo启动后不显示网卡eth0
- eth0未启动或找不到设备
- CCSV5,TI8168(有 图呀 )
- TI8168 编解码例子
- TI8168 PCIe多路高清显卡方案
- TI8168 DSP算法开发流程
- TI8168 DSP算法开发流程
- TI8168嵌入式系统教学实验平台 & TI8168实验箱 & TI8168教学实验箱 & TI8168DSP实验箱
- CentOS下网卡启动、配置等ifcfg-eth0教程
- 启动dhcp出错:No subnet declaration for eth0 (192.168.0.1
- CentOS下网卡启动、配置等ifcfg-eth0教程
- CentOS下网卡启动、配置等ifcfg-eth0教程
- 程序员常去的14个顶级开发社区
- javaweb学习笔记:XML学习
- HTTP 错误 500.19 - 无法使用虚拟目录密码作为用户 administrator 在本地登录到
- android 关闭指定的Activity
- CNN: single-label to multi-label总结
- ti8168 eth0 启动
- 连连看算法
- PAT 1057 Stack 树状数组
- POJ3370 Halloween treats 抽屉原理
- sql 百万级数据库优化方案
- Java 向Hbase表插入数据报(org.apache.hadoop.hbase.client.HTablePool$PooledHTable cannot be cast to org.apac)
- UML用例图关系补充
- javaweb学习笔记:web应用的相关知识
- ECShop后台管理菜单显示、隐藏、修改、增加