Linux C raw_socket (原始套接字)

来源:互联网 发布:淘宝刷粉丝会封号吗 编辑:程序博客网 时间:2024/05/02 19:38

我们平常所用到的网络编程都是在应用层收发数据,每个程序只能收到发给自己的数据,即每个程序只能收到来自该程序绑定的端口的数据。收到的数据往往只包括应用层数据。某些情况下我们需要执行更底层的操作,比如监听所有本机收发的数据、修改报头等。

通过原始套接字,我们可以抓取所有发送到本机的IP包(包括IP头和TCP/UDP/ICMP包头),也可以抓取所有本机收到的帧(包括数据链路层协议头)。普通的套接字无法处理ICMP、IGMP等网络报文,而SOCK_RAW可以。利用原始套接字,我们可以自己构造IP头。

有两种原始套接字
一种是处理IP层即其上的数据,通过指定socket第一个参数为AF_INET来创建这种套接字。
另一种是处理数据链路层即其上的数据,通过指定socket第一个参数为AF_PACKET来创建这种套接字。

AF_INET表示获取从网络层开始的数据
socket(AF_INET, SOCK_RAW, …)
当接收包时,表示用户获得完整的包含IP报头的数据包,即数据从IP报头开始算起。
当发送包时,用户只能发送包含TCP报头或UDP报头或包含其他传输协议的报文,IP报头以及以太网帧头则由内核自动加封。除非是设置了IP_HDRINCL的socket选项。
如果第二个参数为SOCK_STREAM, SOCK_DGRAM,表示接收的数据直接为应用层数据。

PF_PACKET,表示获取的数据是从数据链路层开始的数据
socket(PF_PACKET,SOCK_RAW,htos(ETH_P_IP)):表示获得IPV4的数据链路层帧,即数据包含以太网帧头。14+20+(8:udp 或 20:tcp)
ETH_P_IP: 在<linux/if_ether.h>中定义,可以查看该文件了解支持的其它协议。
SOCK_RAW, SOCK_DGRAM两个参数都可以使用,区别在于使用SOCK_DGRAM收到的数据不包括数据链路层协议头。

总结起来就是:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP|IPPROTO_UDP|IPPROTO_ICMP)发送接收ip数据包
能:该套接字可以接收协议类型为(tcp udp icmp等)发往本机的ip数据包
不能:收到非发往本地ip的数据包(ip软过滤会丢弃这些不是发往本机ip的数据包)
不能:收到从本机发送出去的数据包
发送的话需要自己组织tcp udp icmp等头部.可以setsockopt来自己包装ip头部
这种套接字用来写个ping程序比较适合

socket(PF_PACKET, SOCK_RAW|SOCK_DGRAM, htons(ETH_P_IP|ETH_P_ARP|ETH_P_ALL))发送接收以太网数据帧
这种套接字比较强大,可以监听网卡上的所有数据帧

能: 接收发往本地mac的数据帧
能: 接收从本机发送出去的数据帧(第3个参数需要设置为ETH_P_ALL)
能: 接收非发往本地mac的数据帧(网卡需要设置为promisc混杂模式)
协议类型一共有四个
ETH_P_IP 0x800 只接收发往本机mac的ip类型的数据帧
ETH_P_ARP 0x806 只接受发往本机mac的arp类型的数据帧
ETH_P_RARP 0x8035 只接受发往本机mac的rarp类型的数据帧
ETH_P_ALL 0x3 接收发往本机mac的所有类型ip arp rarp的数据帧, 接收从本机发出的所有类型的数据帧.(混杂模式打开的情况下,会接收到非发往本地mac的数据帧)


应用例子:抓取所有IP包

复制代码
#include <sys/types.h>#include <sys/socket.h>#include <sys/ioctl.h>#include <net/if.h>#include <string.h>#include <stdio.h>#include <stdlib.h>#include <linux/if_packet.h>#include <netinet/if_ether.h>#include <netinet/in.h>typedef struct _iphdr //定义IP首部 {     unsigned char h_verlen; //4位首部长度+4位IP版本号     unsigned char tos; //8位服务类型TOS     unsigned short total_len; //16位总长度(字节)     unsigned short ident; //16位标识     unsigned short frag_and_flags; //3位标志位     unsigned char ttl; //8位生存时间 TTL     unsigned char proto; //8位协议 (TCP, UDP 或其他)     unsigned short checksum; //16位IP首部校验和     unsigned int sourceIP; //32位源IP地址     unsigned int destIP; //32位目的IP地址 }IP_HEADER; typedef struct _udphdr //定义UDP首部{    unsigned short uh_sport;    //16位源端口    unsigned short uh_dport;    //16位目的端口    unsigned int uh_len;//16位UDP包长度    unsigned int uh_sum;//16位校验和}UDP_HEADER;typedef struct _tcphdr //定义TCP首部 {     unsigned short th_sport; //16位源端口     unsigned short th_dport; //16位目的端口     unsigned int th_seq; //32位序列号     unsigned int th_ack; //32位确认号     unsigned char th_lenres;//4位首部长度/6位保留字     unsigned char th_flag; //6位标志位    unsigned short th_win; //16位窗口大小    unsigned short th_sum; //16位校验和    unsigned short th_urp; //16位紧急数据偏移量}TCP_HEADER; typedef struct _icmphdr {      unsigned char  icmp_type;      unsigned char icmp_code; /* type sub code */      unsigned short icmp_cksum;      unsigned short icmp_id;      unsigned short icmp_seq;      /* This is not the std header, but we reserve space for time */      unsigned short icmp_timestamp;  }ICMP_HEADER;void analyseIP(IP_HEADER *ip);void analyseTCP(TCP_HEADER *tcp);void analyseUDP(UDP_HEADER *udp);void analyseICMP(ICMP_HEADER *icmp);int main(void){    int sockfd;     IP_HEADER *ip;    char buf[10240];    ssize_t n;    /* capture ip datagram without ethernet header */    if ((sockfd = socket(PF_PACKET,  SOCK_DGRAM, htons(ETH_P_IP)))== -1)    {            printf("socket error!\n");        return 1;    }    while (1)    {        n = recv(sockfd, buf, sizeof(buf), 0);        if (n == -1)        {            printf("recv error!\n");            break;        }        else if (n==0)            continue;        //接收数据不包括数据链路帧头        ip = ( IP_HEADER *)(buf);        analyseIP(ip);        size_t iplen =  (ip->h_verlen&0x0f)*4;        TCP_HEADER *tcp = (TCP_HEADER *)(buf +iplen);        if (ip->proto == IPPROTO_TCP)        {            TCP_HEADER *tcp = (TCP_HEADER *)(buf +iplen);            analyseTCP(tcp);        }        else if (ip->proto == IPPROTO_UDP)        {            UDP_HEADER *udp = (UDP_HEADER *)(buf + iplen);            analyseUDP(udp);        }        else if (ip->proto == IPPROTO_ICMP)        {            ICMP_HEADER *icmp = (ICMP_HEADER *)(buf + iplen);            analyseICMP(icmp);        }        else if (ip->proto == IPPROTO_IGMP)        {            printf("IGMP----\n");        }        else        {            printf("other protocol!\n");        }                printf("\n\n");    }    close(sockfd);    return 0;}void analyseIP(IP_HEADER *ip){    unsigned char* p = (unsigned char*)&ip->sourceIP;    printf("Source IP\t: %u.%u.%u.%u\n",p[0],p[1],p[2],p[3]);    p = (unsigned char*)&ip->destIP;    printf("Destination IP\t: %u.%u.%u.%u\n",p[0],p[1],p[2],p[3]);}void analyseTCP(TCP_HEADER *tcp){    printf("TCP -----\n");    printf("Source port: %u\n", ntohs(tcp->th_sport));    printf("Dest port: %u\n", ntohs(tcp->th_dport));}void analyseUDP(UDP_HEADER *udp){    printf("UDP -----\n");    printf("Source port: %u\n", ntohs(udp->uh_sport));    printf("Dest port: %u\n", ntohs(udp->uh_dport));}void analyseICMP(ICMP_HEADER *icmp){    printf("ICMP -----\n");    printf("type: %u\n", icmp->icmp_type);    printf("sub code: %u\n", icmp->icmp_code);}
复制代码

 参考:http://baike.baidu.com/view/4263346.htm

1 0
原创粉丝点击