配置ospf ipv6

来源：互联网发布：linux文件拷贝命令编辑：程序博客网时间：2024/06/01 09:28

1.拓扑图

2.配置步骤

步骤1：配置路由器R1

R1(config)#ipv6 unicast-routing
R1(config)#ipv6 router ospf 1 //启动OSPFv3 路由进程 R1(config-rtr)#router-id 1.1.1.1 //定义路由器ID
R1(config-rtr)#default-information originate metric 30 metric-type 2 //向OSPFv3 网络注入一条默认路由
R1(config)#interface Serial0/0/0
R1(config-if)#ipv6 address 2007:12::1/64

R1(config-if)#ipv6 ospf 1 area 1 //在接口上启用OSPFv3，并声明接口所在区域

R1(config-if)#no shutdown

R1(config)#ipv6 route ::/0 s0/0/1 //配置默认路由

步骤2：配置路由器R2

R2(config)#ipv6 unicast-routing

R2(config)#ipv6 router ospf 1

R2(config-rtr)#router-id 2.2.2.2

R2(config)#interface Serial0/0/0

R2(config-if)#ipv6 address 2007:12::2/64

R2(config-if)#ipv6 ospf 1 area 1

R2(config-if)#clock rate 64000

R2(config-if)#no shutdown

R2(config)#interface Serial0/0/1

R2(config-if)#ipv6 address 2007:23::2/64

R2(config-if)# ipv6 ospf 1 area 0

R2(config-if)#clock rate 64000

R2(config-if)#no shutdown

步骤3：配置路由器R3

R3(config)#ipv6 unicast-routing

R3(config)#ipv6 router ospf 1

R3(config-rtr)#router-id 3.3.3.3

R3(config)#interface Serial0/0/0

R3(config-if)#ipv6 address 2007:34::3/64

R3(config-if)#ipv6 ospf 1 area 2

R3(config-if)#clockrate 64000

R3(config-if)#no shutdown

R3(config)#interface Serial0/0/1

R3(config-if)#ipv6 address 2007:23::3/64

R3(config-if)#ipv6 ospf 1 area 0

R3(config-if)#no shutdown

步骤4：配置路由器R4

R4(config)#ipv6 unicast-routing

R4(config)#ipv6 router ospf 1

R4(config-rtr)#router-id 4.4.4.4

R4(config)#interface gigabitEthernet0/0

R4(config-if)#ipv6 address 2008:4444::4/64

R4(config-if)# ipv6 ospf 1 area 2

R4(config-if)#no shutdown

R4(config)#interface Serial0/0/0

R4(config-if)#ipv6 address 2007:34::4/64

R4(config-if)#ipv6 ospf 1 area 2

R4(config-if)#no shutdown

0 0