http://www.lefern.com/question/60464/ru-he-zai-ubuntuzhong-an-zhuang-rapidrocket2720zhen-lie-qia-qu-dong/

如何在Ubuntu中安装RapidRocket2720阵列卡驱动?

• RR2720
• 2720
• RapidRocket
• ubuntu
• 驱动安装

之前用的是windows2012,现在改为Ubuntu12.04了。但是Ubuntu无法识别阵列卡，如何解决?

提问于 8月 30 '14

jess211 
206

添加评论

1 回答

排序最早的回答最近的回答得票多的回答

1

RapidRocket2720没有支持Ubuntu12.04的驱动，你可以使用12.10版本

老的驱动，可以查看 http://www.highpoint-tech.com/BIOSDriver/rr272x1x/Linux/Ubuntu/

安装说明是这个网址

所有Linux驱动，可以查看这个网址

具体步骤如下：

1. Start installing Ubuntu Linux by booting from the installation CD.
2. On the startup screen, for Ubuntu 11.04 and later , select "Install Ubuntu" , then press F6 and input " mvsas.invalid=1". Below is the illustration for Ubuntu 11.10. Press " Enter" to continue .

3. At "welcome" screen. Press " CTRL+ALT+F2 " to switch to the shell on console 2. If the driver is on a floppy diskette, then you should load the floppy module before mount it:

    # modprobe floppy

   Type the following commands to mount floppy diskette:

   # mount –t vfat /dev/fd0 /floppy# cp –r /floppy /tmp/hptdd# umount /floppy

   Unplug all USB storages from the USB port and then type:

   # sh /tmp/hptdd/preinst.sh

   如果你使用的是U盘，那么需要进行以下操作：

   # mkdir /hptdd /tmp/hptdd# dmesg |grep "sd"    这个命令是确定U盘的标识，比如是sda# mount /dev/sda1 /hptdd# cp -rf /hptdd/* /tmp/hptdd/# umount /hptdd

   Unplug all USB storages from the USB port and then type:

   # sh /tmp/hptdd/preinst.sh

4. Then press “ALT+F7” to switch back to installation screen and continue the installation as usual .

5. When the screen shows that “[!!] Finish the installation ”, press “CTRL+ALT+F2” to the shell and type the following commands:

   # sh /tmp/hptdd/postinst.sh

   A message will be displayed that the driver has been installed successfully.

6. Press “ALT+F7” to switch back to installation screen and finish the installation.