C#中串口通信编程
来源:互联网 发布:专业java培训学校 编辑:程序博客网 时间:2024/05/20 13:38
作者:菊花古剑和酒
转自:http://blog.csdn.net/jefftian2008/article/details/8042172
原文作者:ivanx
转载自:http://bbs.msproject.cn/
[翻译]
Tapan Dantre.著Serial Communication using C# and Whidbey
[简介]
本文将介绍如何在.NET平台下使用C#创建串口通信程序,.NET 2.0提供了串口通信的功能,其命名空间是System.IO.Ports。这个新的框架不但可以访问计算机上的串口,还可以和串口设备进行通信。
我们将使用标准的RS 232 C 在PC间通信。它工作在全双工模式下,而且我们不打算使用任何的握手或流控制器,而是使用无modem连接。
命名空间
System.IO.Ports命名空间中最重用的是SerialPort类。
创建SerialPort 对象
通过创建SerialPort 对象,我们可以在程序中控制串口通信的全过程。
我们将要用到的SerialPort 类的方法:
ReadLine():从输入缓冲区读一新行的值,如果没有,会返回NULL
WriteLine(string):写入输出缓冲
Open():打开一个新的串口连接
Close():关闭
Code:
//create a Serial Port object
SerialPort sp = new SerialPort ();
默认情况下,DataBits 值是8,StopBits是1,通信端口是COM1。这些都可以在下面的属性中重新设置:
BaudRate:串口的波特率
StopBits:每个字节的停止位数量
ReadTimeout:当读操作没有完成时的停止时间。单位,毫秒
还有不少其它公共属性,自己查阅MSDN。
串口的硬件知识
在数据传输的时候,每个字节的数据通过单个的电缆线传输。包包括开始位,数据,结束为。一旦开始位传出,后面就会传数据,可能是5,6,7或8位,就看你的设定了。发送和接收必须设定同样的波特率和数据位数。
无猫模式
没有Modem模式的电缆只是简单地交叉传送和接收线。同样DTR & DSR,和 RTS & CTS也需要交叉。
RS232针图
这里,我们三条线。互连2和3(一段的2pin连接3pin),连接两端的5pin。
[示例程序]
主程序
如果想使用默认属性,按“Save Status”按钮,如果想改变属性按“Property”。它会弹出下图:
设定好之后,可以通信了。
主窗口的代码
Code:
#region Using directives
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Windows.Forms;
using System.IO.Ports;
#endregion
namespace Serialexpample
{
partial class Form1 : Form
{
//create instance of property page
//property page is used to set values for stop bits and
//baud rate
PropertyPage pp = new PropertyPage();
//create an Serial Port object
SerialPort sp = new SerialPort();
public Form1()
{
InitializeComponent();
}
private void propertyButton_Click(object sender, EventArgs e)
{
//show property dialog
pp.ShowDialog();
propertyButton.Hide();
}
private void sendButton_Click(object sender, EventArgs e)
{
try
{
//write line to serial port
sp.WriteLine(textBox.Text);
//clear the text box
textBox.Text = "";
}
catch (System.Exception ex)
{
baudRatelLabel.Text = ex.Message;
}
}
private void ReadButton_Click(object sender, EventArgs e)
{
try
{
//clear the text box
textBox.Text = "";
//read serial port and displayed the data in text box
textBox.Text = sp.ReadLine();
}
catch(System.Exception ex)
{
baudRatelLabel.Text = ex.Message;
}
}
private void Form1_Load(object sender, EventArgs e)
{
}
private void Form1_FormClosing(object sender, FormClosingEventArgs e)
{
MessageBox.Show("Do u want to Close the App");
sp.Close();
}
private void startCommButton_Click(object sender, EventArgs e)
{
startCommButton.Hide();
sendButton.Show();
readButton.Show();
textBox.Show();
}
//when we want to save the status(value)
private void saveStatusButton_Click_1(object sender, EventArgs e)
{
//display values
//if no property is set the default values
if (pp.bRate == "" && pp.sBits == "")
{
dataBitLabel.Text = "BaudRate = " + sp.BaudRate.ToString();
readTimeOutLabel.Text = "StopBits = " + sp.StopBits.ToString();
}
else
{
dataBitLabel.Text = "BaudRate = " + pp.bRate;
readTimeOutLabel.Text = "StopBits = " + pp.sBits;
}
parityLabel.Text = "DataBits = " + sp.DataBits.ToString();
stopBitLabel.Text = "Parity = " + sp.Parity.ToString();
readTimeOutLabel.Text = "ReadTimeout = " +
sp.ReadTimeout.ToString();
if (propertyButton.Visible == true)
propertyButton.Hide();
saveStatusButton.Hide();
startCommButton.Show();
try
{
//open serial port
sp.Open();
//set read time out to 500 ms
sp.ReadTimeout = 500;
}
catch (System.Exception ex)
{
baudRatelLabel.Text = ex.Message;
}
}
}
}
属性设置对话框代码:
Code:
#region Using directives
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
#endregion
namespace Serialexpample
{
partial class PropertyPage : Form
{
//variables for storing values of baud rate and stop bits
private string baudR="";
private string stopB="";
//property for setting and getting baud rate and stop bits
public string bRate
{
get
{
return baudR;
}
set
{
baudR = value;
}
}
public string sBits
{
get
{
return stopB;
}
set
{
stopB = value;
}
}
public PropertyPage()
{
InitializeComponent();
}
private void cancelButton_Click(object sender, EventArgs e)
{
this.bRate = "";
this.sBits = "";
//close form
this.Close();
}
private void okButton_Click_1(object sender, EventArgs e)
{
//here we set the value for stop bits and baud rate.
this.bRate = BaudRateComboBox.Text;
this.sBits = stopBitComboBox.Text;
//
this.Close();
}
}
}
一.概述
2.以类的方式
VB:
1) 定义SerialPort类实例
Dim SpCom As New System.IO.Ports.SerialPort()
2) 设置通讯端口号及波特率、数据位、停止位和校验位。
SpCom.PortName = "COM1"
SpCom.BaudRate = 9600
SpCom.Parity = IO.Ports.Parity.None
SpCom.DataBits = 8
SpCom.StopBits = IO.Ports.StopBits.One
或是定义时直接初始化
Dim SpCom As New System.IO.Ports.SerialPort("COM1", 9600, IO.Ports.Parity.Even, 8,
IO.Ports.StopBits.None)
3) 发送数据
SpCom.Write(TextSendData.Text)
4) 添加接受事件
a) 在运行时将事件与事件处理程序相关联
AddHandler SpCom.DataReceived, AddressOf EventReceiveData
说明:
AddressOf 创建引用特定过程的过程委托实例
AddressOf 运算符可以用作委托构造函数的操作数,或可以用在编译器能够确定委 托类型的上下文中。
b) 添加事件处理程序(签名一定要一致)
Sub EventReceiveData(ByVal sender As Object, ByVal e As
System.IO.Ports.SerialDataReceivedEventArgs)
5) 读取数据
Dim strT As String
strT = SpCom.ReadExisting()
C#:
1) 添加引用
using System.IO.Ports;
2) 定义SerialPort类实例
private SerialPort SpCom2 = newSpCom ("COM2", 9600,Parity.None, 8, StopBits.One);
3) 设置通讯端口号及波特率、数据位、停止位和校验位。
SpCom.PortName = "COM1";
SpCom.BaudRate = 9600;
SpCom.Parity = IO.Ports.Parity.None;
SpCom.DataBits = 8;
SpCom.StopBits = IO.Ports.StopBits.One;
或是定义时直接初始化
private SerialPort SpCom2 = new SpCom ("COM2", 9600,Parity.None, 8, StopBits.One);
4) 发送数据
SpCom.Write(TextSendData.Text);
5) 添加接受事件
a) 在运行时将事件与事件处理程序相关联(通过委托实现)
SpCom.DataReceived += new SerialDataReceivedEventHandler(SpCom2_DataReceived);
说明:
SerialDataReceivedEventHandler 委托 表示将处理SerialPort对象的DataReceived 事件的方法
b) 添加事件处理程序(签名一定要一致)
private void SpCom_DataReceived(object sender, SerialDataReceivedEventArgs e)
6) 读取数据
string data =SpCom .ReadExisting();
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- c#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程
- C#中串口通信编程 收藏
- C#中串口通信编程[转载]
- C#串口通信编程
- C#实现串口通信编程
- C#中串口通信笔记
- C#串口通信编程类(修改版)
- 使用AFNetworking (2.2.3)遇到的问题
- java web开发 高并发处理
- Factorization Machines 学习笔记(四)学习算法
- windows下安装Apache24
- OpenCV 无法启动此程序,因为计算机中丢失opencv_core249.dll。请尝试重新安装改程序已解决此问题
- C#中串口通信编程
- Linux命令总结
- 关于函数返回值作用域的一些思考
- Java导入工程文件问题
- c#注释规范
- LeetCode | Minimum Depth of Binary Tree
- Android 6大开源框架
- solr源码导入eclipse
- appframework基础 : 二、定义header