RabbitMQ服务器配置文件

       RabbitMQ的服务器配置设置，我做了修改，修改如下：

   {tcp_listeners, [5672]},   {loopback_users, ["elite"]}

     其它的设置可以根据业务需要设置，完整版如下。

%% -*- mode: erlang -*-%% ----------------------------------------------------------------------------%% RabbitMQ Sample Configuration File.%%%% See http://www.rabbitmq.com/configure.html for details.%% ----------------------------------------------------------------------------[ {rabbit,  [%%   %% Network Connectivity   %% ====================   %%   %% By default, RabbitMQ will listen on all interfaces, using   %% the standard (reserved) AMQP port.   %%   {tcp_listeners, [5672]},   {loopback_users, ["elite"]}   %% To listen on a specific interface, provide a tuple of {IpAddress, Port}.   %% For example, to listen only on localhost for both IPv4 and IPv6:   %%   %% {tcp_listeners, [{"127.0.0.1", 5672},   %%                  {"::1",       5672}]},   %% SSL listeners are configured in the same fashion as TCP listeners,   %% including the option to control the choice of interface.   %%   %% {ssl_listeners, [5671]},   %% Log levels (currently just used for connection logging).   %% One of 'info', 'warning', 'error' or 'none', in decreasing order   %% of verbosity. Defaults to 'info'.   %%   %% {log_levels, [{connection, info}]},   %% Set to 'true' to perform reverse DNS lookups when accepting a   %% connection. Hostnames will then be shown instead of IP addresses   %% in rabbitmqctl and the management plugin.   %%   %% {reverse_dns_lookups, true},   %%   %% Security / AAA   %% ==============   %%   %% Configuring SSL.   %% See http://www.rabbitmq.com/ssl.html for full documentation.   %%   %% {ssl_options, [{cacertfile,           "/path/to/testca/cacert.pem"},   %%                {certfile,             "/path/to/server/cert.pem"},   %%                {keyfile,              "/path/to/server/key.pem"},   %%                {verify,               verify_peer},   %%                {fail_if_no_peer_cert, false}]},   %% Choose the available SASL mechanism(s) to expose.   %% The two default (built in) mechanisms are 'PLAIN' and   %% 'AMQPLAIN'. Additional mechanisms can be added via   %% plugins.   %%   %% See http://www.rabbitmq.com/authentication.html for more details.   %%   %% {auth_mechanisms, ['PLAIN', 'AMQPLAIN']},   %% Select an authentication database to use. RabbitMQ comes bundled   %% with a built-in auth-database, based on mnesia.   %%   %% {auth_backends, [rabbit_auth_backend_internal]},   %% Configurations supporting the rabbitmq_auth_mechanism_ssl and   %% rabbitmq_auth_backend_ldap plugins.   %%   %% NB: These options require that the relevant plugin is enabled.   %% See http://www.rabbitmq.com/plugins.html for further details.   %% The RabbitMQ-auth-mechanism-ssl plugin makes it possible to   %% authenticate a user based on the client's SSL certificate.   %%   %% To use auth-mechanism-ssl, add to or replace the auth_mechanisms   %% list with the entry 'EXTERNAL'.   %%   %% {auth_mechanisms, ['EXTERNAL']},   %% The rabbitmq_auth_backend_ldap plugin allows the broker to   %% perform authentication and authorisation by deferring to an   %% external LDAP server.   %%   %% For more information about configuring the LDAP backend, see   %% http://www.rabbitmq.com/ldap.html.   %%   %% Enable the LDAP auth backend by adding to or replacing the   %% auth_backends entry:   %%   %% {auth_backends, [rabbit_auth_backend_ldap]},   %% This pertains to both the rabbitmq_auth_mechanism_ssl plugin and   %% STOMP ssl_cert_login configurations. See the rabbitmq_stomp   %% configuration section later in this fail and the README in   %% https://github.com/rabbitmq/rabbitmq-auth-mechanism-ssl for further   %% details.   %%   %% To use the SSL cert's CN instead of its DN as the username   %%   %% {ssl_cert_login_from, common_name},   %%   %% Default User / VHost   %% ====================   %%   %% On first start RabbitMQ will create a vhost and a user. These   %% config items control what gets created. See   %% http://www.rabbitmq.com/access-control.html for further   %% information about vhosts and access control.   %%   %% {default_vhost,       <<"/">>},   %% {default_user,        <<"guest">>},   %% {default_pass,        <<"guest">>},   %% {default_permissions, [<<".*">>, <<".*">>, <<".*">>]},   %% Tags for default user   %%   %% For more details about tags, see the documentation for the   %% Management Plugin at http://www.rabbitmq.com/management.html.   %%   %% {default_user_tags, [administrator]},   %%   %% Additional network and protocol related configuration   %% =====================================================   %%   %% Set the default AMQP heartbeat delay (in seconds).   %%   %% {heartbeat, 600},   %% Set the max permissible size of an AMQP frame (in bytes).   %%   %% {frame_max, 131072},   %% Set the max permissible number of channels per connection.   %% 0 means "no limit".   %%   %% {channel_max, 128},   %% Customising Socket Options.   %%   %% See (http://www.erlang.org/doc/man/inet.html#setopts-2) for   %% further documentation.   %%   %% {tcp_listen_options, [binary,   %%                       {packet,        raw},   %%                       {reuseaddr,     true},   %%                       {backlog,       128},   %%                       {nodelay,       true},   %%                       {exit_on_close, false}]},   %%   %% Resource Limits & Flow Control   %% ==============================   %%   %% See http://www.rabbitmq.com/memory.html for full details.   %% Memory-based Flow Control threshold.   %%   %% {vm_memory_high_watermark, 0.4},   %% Fraction of the high watermark limit at which queues start to   %% page message out to disc in order to free up memory.   %%   %% {vm_memory_high_watermark_paging_ratio, 0.5},   %% Set disk free limit (in bytes). Once free disk space reaches this   %% lower bound, a disk alarm will be set - see the documentation   %% listed above for more details.   %%   %% {disk_free_limit, 50000000},   %% Alternatively, we can set a limit relative to total available RAM.   %%   %% {disk_free_limit, {mem_relative, 1.0}},   %%   %% Misc/Advanced Options   %% =====================   %%   %% NB: Change these only if you understand what you are doing!   %%   %% To announce custom properties to clients on connection:   %%   %% {server_properties, []},   %% How to respond to cluster partitions.   %% See http://www.rabbitmq.com/partitions.html for further details.   %%   %% {cluster_partition_handling, ignore},   %% Make clustering happen *automatically* at startup - only applied   %% to nodes that have just been reset or started for the first time.   %% See http://www.rabbitmq.com/clustering.html#auto-config for   %% further details.   %%   %% {cluster_nodes, {['[e-mail]'], disc}},   %% Set (internal) statistics collection granularity.   %%   %% {collect_statistics, none},   %% Statistics collection interval (in milliseconds).   %%   %% {collect_statistics_interval, 5000},   %% Explicitly enable/disable hipe compilation.   %%   %% {hipe_compile, true}  ]}, %% ---------------------------------------------------------------------------- %% Advanced Erlang Networking/Clustering Options. %% %% See http://www.rabbitmq.com/clustering.html for details %% ---------------------------------------------------------------------------- {kernel,  [%% Sets the net_kernel tick time.   %% Please see http://erlang.org/doc/man/kernel_app.html and   %% http://www.rabbitmq.com/nettick.html for further details.   %%   %% {net_ticktime, 60}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Management Plugin %% %% See http://www.rabbitmq.com/management.html for details %% ---------------------------------------------------------------------------- {rabbitmq_management,  [%% Pre-Load schema definitions from the following JSON file. See   %% http://www.rabbitmq.com/management.html#load-definitions   %%   %% {load_definitions, "/path/to/schema.json"},   %% Log all requests to the management HTTP API to a file.   %%   %% {http_log_dir, "/path/to/access.log"},   %% Change the port on which the HTTP listener listens,   %% specifying an interface for the web server to bind to.   %% Also set the listener to use SSL and provide SSL options.   %%   %% {listener, [{port,     12345},   %%             {ip,       "127.0.0.1"},   %%             {ssl,      true},   %%             {ssl_opts, [{cacertfile, "/path/to/cacert.pem"},   %%                         {certfile,   "/path/to/cert.pem"},   %%                         {keyfile,    "/path/to/key.pem"}]}]},   %% Configure how long aggregated data (such as message rates and queue   %% lengths) is retained. Please read the plugin's documentation in   %% https://www.rabbitmq.com/management.html#configuration for more   %% details.   %%   %% {sample_retention_policies,   %%  [{global,   [{60, 5}, {3600, 60}, {86400, 1200}]},   %%   {basic,    [{60, 5}, {3600, 60}]},   %%   {detailed, [{10, 5}]}]}  ]}, {rabbitmq_management_agent,  [%% Misc/Advanced Options   %%   %% NB: Change these only if you understand what you are doing!   %%   %% {force_fine_statistics, true}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Shovel Plugin %% %% See http://www.rabbitmq.com/shovel.html for details %% ---------------------------------------------------------------------------- {rabbitmq_shovel,  [{shovels,    [%% A named shovel worker.     %% {my_first_shovel,     %%  [     %% List the source broker(s) from which to consume.     %%     %%   {sources,     %%    [%% URI(s) and pre-declarations for all source broker(s).     %%     {brokers, ["amqp://user:[e-mail]/my_vhost"]},     %%     {declarations, []}     %%    ]},     %% List the destination broker(s) to publish to.     %%   {destinations,     %%    [%% A singular version of the 'brokers' element.     %%     {broker, "amqp://"},     %%     {declarations, []}     %%    ]},     %% Name of the queue to shovel messages from.     %%     %% {queue, <<"your-queue-name-goes-here">>},     %% Optional prefetch count.     %%     %% {prefetch_count, 10},     %% when to acknowledge messages:     %% - no_ack: never (auto)     %% - on_publish: after each message is republished     %% - on_confirm: when the destination broker confirms receipt     %%     %% {ack_mode, on_confirm},     %% Overwrite fields of the outbound basic.publish.     %%     %% {publish_fields, [{exchange,    <<"my_exchange">>},     %%                   {routing_key, <<"from_shovel">>}]},     %% Static list of basic.properties to set on re-publication.     %%     %% {publish_properties, [{delivery_mode, 2}]},     %% The number of seconds to wait before attempting to     %% reconnect in the event of a connection failure.     %%     %% {reconnect_delay, 2.5}     %% ]} %% End of my_first_shovel    ]}   %% Rather than specifying some values per-shovel, you can specify   %% them for all shovels here.   %%   %% {defaults, [{prefetch_count,     0},   %%             {ack_mode,           on_confirm},   %%             {publish_fields,     []},   %%             {publish_properties, [{delivery_mode, 2}]},   %%             {reconnect_delay,    2.5}]}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ Stomp Adapter %% %% See http://www.rabbitmq.com/stomp.html for details %% ---------------------------------------------------------------------------- {rabbitmq_stomp,  [%% Network Configuration - the format is generally the same as for the broker   %% Listen only on localhost (ipv4 & ipv6) on a specific port.   %% {tcp_listeners, [{"127.0.0.1", 61613},   %%                  {"::1",       61613}]},   %% Listen for SSL connections on a specific port.   %% {ssl_listeners, [61614]},   %% Additional SSL options   %% Extract a name from the client's certificate when using SSL.   %%   %% {ssl_cert_login, true},   %% Set a default user name and password. This is used as the default login   %% whenever a CONNECT frame omits the login and passcode headers.   %%   %% Please note that setting this will allow clients to connect without   %% authenticating!   %%   %% {default_user, [{login,    "guest"},   %%                 {passcode, "guest"}]},   %% If a default user is configured, or you have configured use SSL client   %% certificate based authentication, you can choose to allow clients to   %% omit the CONNECT frame entirely. If set to true, the client is   %% automatically connected as the default user or user supplied in the   %% SSL certificate whenever the first frame sent on a session is not a   %% CONNECT frame.   %%   %% {implicit_connect, true}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ MQTT Adapter %% %% See http://hg.rabbitmq.com/rabbitmq-mqtt/file/stable/README.md for details %% ---------------------------------------------------------------------------- {rabbitmq_mqtt,  [%% Set the default user name and password. Will be used as the default login   %% if a connecting client provides no other login details.   %%   %% Please note that setting this will allow clients to connect without   %% authenticating!   %%   %% {default_user, <<"guest">>},   %% {default_pass, <<"guest">>},   %% Enable anonymous access. If this is set to false, clients MUST provide   %% login information in order to connect. See the default_user/default_pass   %% configuration elements for managing logins without authentication.   %%   %% {allow_anonymous, true},   %% If you have multiple chosts, specify the one to which the   %% adapter connects.   %%   %% {vhost, <<"/">>},   %% Specify the exchange to which messages from MQTT clients are published.   %%   %% {exchange, <<"amq.topic">>},   %% Specify TTL (time to live) to control the lifetime of non-clean sessions.   %%   %% {subscription_ttl, 1800000},   %% Set the prefetch count (governing the maximum number of unacknowledged   %% messages that will be delivered).   %%   %% {prefetch, 10},   %% TCP/SSL Configuration (as per the broker configuration).   %%   %% {tcp_listeners, [1883]},   %% {ssl_listeners, []},   %% TCP/Socket options (as per the broker configuration).   %%   %% {tcp_listen_options, [binary,   %%                       {packet,    raw},   %%                       {reuseaddr, true},   %%                       {backlog,   128},   %%                       {nodelay,   true}]}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ AMQP 1.0 Support %% %% See http://hg.rabbitmq.com/rabbitmq-amqp1.0/file/default/README.md %% for details %% ---------------------------------------------------------------------------- {rabbitmq_amqp1_0,  [%% Connections that are not authenticated with SASL will connect as this   %% account. See the README for more information.   %%   %% Please note that setting this will allow clients to connect without   %% authenticating!   %%   %% {default_user, "guest"},   %% Enable protocol strict mode. See the README for more information.   %%   %% {protocol_strict_mode, false}  ]}, %% ---------------------------------------------------------------------------- %% RabbitMQ LDAP Plugin %% %% See http://www.rabbitmq.com/ldap.html for details. %% %% ---------------------------------------------------------------------------- {rabbitmq_auth_backend_ldap,  [%%   %% Connecting to the LDAP server(s)   %% ================================   %%   %% Specify servers to bind to. You *must* set this in order for the plugin   %% to work properly.   %%   %% {servers, ["your-server-name-goes-here"]},   %% Connect to the LDAP server using SSL   %%   %% {use_ssl, false},   %% Specify the LDAP port to connect to   %%   %% {port, 389},   %% LDAP connection timeout, in milliseconds or 'infinity'   %%   %% {timeout, infinity},   %% Enable logging of LDAP queries.   %% One of   %%   - false (no logging is performed)   %%   - true (verbose logging of the logic used by the plugin)   %%   - network (as true, but additionally logs LDAP network traffic)   %%   %% Defaults to false.   %%   %% {log, false},   %%   %% Authentication   %% ==============   %%   %% Pattern to convert the username given through AMQP to a DN before   %% binding   %%   %% {user_dn_pattern, "cn=${username},ou=People,dc=example,dc=com"},   %% Alternatively, you can convert a username to a Distinguished   %% Name via an LDAP lookup after binding. See the documentation for   %% full details.   %% When converting a username to a dn via a lookup, set these to   %% the name of the attribute that represents the user name, and the   %% base DN for the lookup query.   %%   %% {dn_lookup_attribute,   "userPrincipalName"},   %% {dn_lookup_base,        "DC=gopivotal,DC=com"},   %% Controls how to bind for authorisation queries and also to   %% retrieve the details of users logging in without presenting a   %% password (e.g., SASL EXTERNAL).   %% One of   %%  - as_user (to bind as the authenticated user - requires a password)   %%  - anon    (to bind anonymously)   %%  - {UserDN, Password} (to bind with a specified user name and password)   %%   %% Defaults to 'as_user'.   %%   %% {other_bind, as_user},   %%   %% Authorisation   %% =============   %%   %% The LDAP plugin can perform a variety of queries against your   %% LDAP server to determine questions of authorisation. See   %% http://www.rabbitmq.com/ldap.html#authorisation for more   %% information.   %% Set the query to use when determining vhost access   %%   %% {vhost_access_query, {in_group,   %%                       "ou=${vhost}-users,ou=vhosts,dc=example,dc=com"}},   %% Set the query to use when determining resource (e.g., queue) access   %%   %% {resource_access_query, {constant, true}},   %% Set queries to determine which tags a user has   %%   %% {tag_queries, []}  ]}].