ST nucleo板子外接串口调试方法
来源:互联网 发布:js array长度的方法 编辑:程序博客网 时间:2024/05/21 07:57
因为我的L053板子有点问题,没法用mbed的串口调试程序。
所以只能自己接串口模块连接电脑。
比较坑爹的是,nucleo板子上TX和RX的两个引脚,默认是不和MCU相连接的……
如果想要使用两个引脚,需要将板子背面的SB62和SB63相连接(焊一下)。
这个东西在ST给的文档里有说明,下载地址,在这个网页下方有很多相关的文档。比较详细的是UM1724这个pdf。
“The USART2 interface available on PA2 and PA3 of the STM32 microcontroller can be connected to ST-LINK MCU, STMicroelectronics Morpho connector or to Arduino connector. The choice can be changed by setting the related solder bridges. By default the USART2 communication between the target MCU and ST-LINK MCU is enabled in order to support Virtual Com Port for mbed (SB13 and SB14 ON, SB62 and SB63 OFF). If the communication between the target MCU PA2 (D1) or PA3 (D0) and shield or extension board is required, SB62 and SB63 should be ON, SB13 and SB14 should be OFF. In such case it possible to connect another USART to ST-LINK MCU using flying wires between Morpho connector and CN3.”
0 0
- ST nucleo板子外接串口调试方法
- 调试wifi转串口的板子成功了
- ST公司的M4板子
- ST 求区间最大值板子
- ST Nucleo mbed套件开发 一 MBED环境使用 以Nucleo-F401为例
- ST Nucleo mbed套件开发 一 MBED环境使用 以Nucleo-F401为例 (二)
- atmel板子调试
- 调试板子启动不了
- usb 转串口 链接板子
- STM32F02R8T6Nuceo板子Uart2串口问题
- 关于STM32开发板Nucleo-L053板子不上电运行问题研究
- 近几天 用微芯力科的板子 调试usb虚拟串口的程序,发现一些问题以及解决方法。和大家共享
- ST emWin 调试
- ST-LINK调试完成
- 把FL2440 的调试串口改为普通串口的方法
- 把FL2440 的调试串口改为普通串口的方法
- imx280调试串口转换成普通串口的方法
- ST nucleo系列在使用mbed时 bin文件的替代烧录方式
- 《c程序设计语言》读书笔记
- 第九周循环语句总结
- 编程珠玑第二章习题答案
- 黑马程序员--我的梦想与一群拥有梦想的人一起拼搏
- SQLite通用数据库类
- ST nucleo板子外接串口调试方法
- 下雪了,想起童年的冬天
- hdu 1157 Who's in the Middle
- shader基础
- 算法导论中十二章C++实现二叉查找树建立,插入,删除,遍历操作
- 解决/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found问题
- 前端基础——CSS+DIV布局
- 构建Maven项目以及遇到的问题
- 【博闻强记】java来发送邮件