思科ASR1000从ipbase提升到enterprise方法

在思科路由器IOS15.5极其以上版本， 针对RP2以上平台进行了license控制，虽然load了enterprise版本，但是，如果一下命令不被执行，则，启动的就是ipbase版本，很多命令都被限制了。

执行完该命令，然后重启系统，就OK了。

不需要额外的license申请，只要执行一下就可以了，不知道将来还会有什么后续动作，呼呼

PE4-ASR1006-10#PE4-ASR1006-10#*Nov  5 12:07:58.244 CST: %SYS-5-CONFIG_I: Configured from console by consoleconf tEnter configuration commands, one per line.  End with CNTL/Z.PE4-ASR1006-10(config)#boot ?  bootstrap  Bootstrap image file  config     Configuration file  host       Router-specific config file  network    Network-wide config file  system     System image filePE4-ASR1006-10(config)#licensPE4-ASR1006-10(config)#license ?  accept     Accept all further License Agreements  agent      Configure LIC_AGENT  boot       license boot config commands  call-home  license call-home config commands  smart      Smart licensingPE4-ASR1006-10(config)#license bootPE4-ASR1006-10(config)#license boot ?  level  which level to boot  suite  which suite to bootPE4-ASR1006-10(config)#license boot le<strong>PE4-ASR1006-10(config)#license boot level ?  adventerprise  Advanced Enterprise License Level  advipservices  Advanced IP Services License Level  ipbase         IP Base License Level</strong>PE4-ASR1006-10(config)#<strong>license boot level adventerprise</strong>PLEASE  READ THE  FOLLOWING TERMS  CAREFULLY. INSTALLING THE LICENSE ORLICENSE  KEY  PROVIDED FOR  ANY CISCO  PRODUCT  FEATURE  OR  USING SUCHPRODUCT  FEATURE  CONSTITUTES  YOUR  FULL ACCEPTANCE  OF  THE FOLLOWINGTERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO  BE BOUNDBY ALL THE TERMS SET FORTH HEREIN.Use of this product feature requires  an additional license from Cisco,together with an additional  payment.  You may use this product featureon an evaluation basis, without payment to Cisco, for 60 days. Your useof the  product,  including  during the 60 day  evaluation  period,  issubject to the Cisco end user license agreementhttp://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.htmlIf you use the product feature beyond the 60 day evaluation period, youmust submit the appropriate payment to Cisco for the license. After the60 day  evaluation  period,  your  use of the  product  feature will begoverned  solely by the Cisco  end user license agreement (link above),together  with any supplements  relating to such product  feature.  Theabove  applies  even if the evaluation  license  is  not  automaticallyterminated  and you do  not receive any notice of the expiration of theevaluation  period.  It is your  responsibility  to  determine when theevaluation  period is complete and you are required to make  payment toCisco for your use of the product feature beyond the evaluation period.Your  acceptance  of  this agreement  for the software  features on oneproduct  shall be deemed  your  acceptance  with  respect  to all  suchsoftware  on all Cisco  products  you purchase  which includes the samesoftware.  (The foregoing  notwithstanding, you must purchase a licensefor each software  feature you use past the 60 days evaluation  period,so  that  if you enable a software  feature on  1000  devices, you mustpurchase 1000 licenses for use past  the 60 day evaluation period.)    Activation  of the  software command line interface will be evidence ofyour acceptance of this agreement.ACCEPT? (yes/[no]): yes% use 'write' command to make license boot config take effect on next bootPE4-ASR1006-10(config)#*Nov  5 12:08:22.686 CST: %LICENSE-6-EULA_ACCEPTED: EULA for feature adventerprise 1.0 has been accepted. UDI=ASR1006:NWG1423002E; StoreIndex=0:Built-In License Storage*Nov  5 12:08:23.796 CST: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = asr1001 Next reboot level = adventerprise and License = adventerprisePE4-ASR1006-10(config)#PE4-ASR1006-10(config)#PE4-ASR1006-10(config)#PE4-ASR1006-10(config)#endPE4-ASR1006-10#PE4-ASR1006-10#wrBuilding configuration...*Nov  5 12:08:27.172 CST: %SYS-5-CONFIG_I: Configured from console by console[OK]PE4-ASR1006-10#PE4-ASR1006-10#