用netstat查看网络状态详解
来源:互联网 发布:医学软件大全下载 编辑:程序博客网 时间:2024/09/21 08:50
一、Linux服务器上11种网络连接状态:
通常情况下:一个正常的TCP连接,都会有三个阶段:1、TCP三次握手;2、数据传送;3、TCP四次挥手
注:以下说明最好能结合”图:TCP的状态机”来理解。
SYN:(同步序列编号,Synchronize SequenceNumbers)该标志仅在三次握手建立TCP连接时有效。表示一个新的TCP连接请求。
ACK:(确认编号,Acknowledgement Number)是对TCP请求的确认标志,同时提示对端系统已经成功接收所有数据。
FIN:(结束标志,FINish)用来结束一个TCP回话.但对应端口仍处于开放状态,准备接收后续数据。
1)、LISTEN:首先服务端需要打开一个socket进行监听,状态为LISTEN.
2)、SYN_SENT:客户端通过应用程序调用connect进行activeopen.于是客户端tcp发送一个SYN以请求建立一个连接.之后状态置为SYN_SENT.
3)、SYN_RECV:服务端应发出ACK确认客户端的SYN,同时自己向客户端发送一个SYN.之后状态置为SYN_RECV
4)、ESTABLISHED: 代表一个打开的连接,双方可以进行或已经在数据交互了。
5)、FIN_WAIT1:主动关闭(activeclose)端应用程序调用close,于是其TCP发出FIN请求主动关闭连接,之后进入FIN_WAIT1状态.
6)、CLOSE_WAIT:被动关闭(passiveclose)端TCP接到FIN后,就发出ACK以回应FIN请求(它的接收也作为文件结束符传递给上层应用程序),并进入CLOSE_WAIT.
7)、FIN_WAIT2:主动关闭端接到ACK后,就进入了FIN-WAIT-2 .
8)、LAST_ACK:被动关闭端一段时间后,接收到文件结束符的应用程序将调用CLOSE关闭连接。这导致它的TCP也发送一个FIN,等待对方的ACK.就进入了LAST-ACK .
9)、TIME_WAIT:在主动关闭端接收到FIN后,TCP就发送ACK包,并进入TIME-WAIT状态。
10)、CLOSING: 比较少见.
11)、CLOSED: 被动关闭端在接受到ACK包后,就进入了closed的状态。连接结束.
TIME_WAIT状态的形成只发生在主动关闭连接的一方。
主动关闭方在接收到被动关闭方的FIN请求后,发送成功给对方一个ACK后,将自己的状态由FIN_WAIT2修改为TIME_WAIT,而必须再等2倍的MSL(Maximum SegmentLifetime,MSL是一个数据报在internetwork中能存在的时间)时间之后双方才能把状态都改为CLOSED以关闭连接。目前RHEL里保持TIME_WAIT状态的时间为60秒。
当然上述很多TCP状态在系统里都有对应的解释或设置,可见man tcp
二、关于长连接和短连接:
通俗点讲:短连接就是一次TCP请求得到结果后,连接马上结束.而长连接并不马上断开,而一直保持着,直到长连接TIMEOUT(具体程序都有相关参数说明).长连接可以避免不断的进行TCP三次握手和四次挥手.
长连接(keepalive)是需要靠双方不断的发送探测包来维持的,keepalive期间服务端和客户端的TCP连接状态是ESTABLISHED.目前http1.1版本里默认都是keepalive(1.0版本默认是不keepalive的),ie6/7/8和firefox都默认用的是http1.1版本了(如何查看当前浏览器用的是哪个版本,这里不再赘述)。Apache,java
一个应用至于到底是该使用短连接还是长连接,应该视具体情况而定。一般的应用应该使用长连接。
1、Linux的相关keepalive参数
a、tcp_keepalive_time – INTEGER
How often TCP sends out keepalive messages when keepalive isenabled.
Default:
b、 tcp_keepalive_probes – INTEGER
How many keepalive probes TCP sends out, until it decides thatthe
connection is broken. Default value:
c、 tcp_keepalive_intvl – INTEGER
How frequently the probes are send out. Multiplied by
tcp_keepalive_probes it is time to kill not respondingconnection,
after probes started. Default value:
will be aborted after
2、F5负载均衡上的相关参数说明
a、KeepAlive Interval
Specifies, when enabled, how frequently the system sends data overan idle TCP connection, to determine whether the connection isstill valid.
Specify:
b、Time Wait
Specifies the length of time that a TCP connection remains in theTIME-WAIT statebefore entering the CLOSED state.
Specify:
c、Idle Timeout
Specifies the length of time that a connection is idle (has notraffic) before the connection is eligible
Specify:
3、Apache的相关参数说明
以下是Apache/2.0.61版本的默认参数和说明
a、KeepAlive:
default
one request per connection). Set to “Off” to deactivate.
b、MaxKeepAliveRequests:
default
during a persistent connection. Set to
We recommend you leave
c、KeepAliveTimeout:
default
same client on the same connection.
原文地址:http://www.vimer.cn?p=442
- 用netstat查看网络状态详解
- 用netstat查看网络状态详解
- 用netstat查看网络状态详解
- 用netstat查看网络状态详解
- netstat查看网络状态
- netstat查看网络状态
- 命令netstat查看网络状态
- 在Linux下用netstat查看网络状态、端口状态
- 在Linux下用netstat查看网络状态、端口状态
- Linux下用netstat查看网络状态、端口状态
- 在Linux下用netstat查看网络状态、端口状态
- Linux下用netstat查看网络状态、端口状态
- Linux服务器上用netstat查看网络状态
- netstat查看linux服务器网络连接状态
- netstat查看linux服务器网络连接状态
- netstat端口状态查看命令详解
- linux netstat命令参数及用法详解--查看网络连接详细状态命令
- netstat查看系统状态
- Arduino的详细介绍(基于Mega2560)(分文)——SPI library
- 查看硬盘序列号
- Crontab的格式
- SQL Server 中的事务与事务隔离级别以及如何理解脏读, 未提交读,不可重复读和幻读产生的过程和原因
- linux用smb挂载windows共享文件,…
- 用netstat查看网络状态详解
- 模板方法模式
- Struts2-----2、Struts2的下载和安装
- sqoop导入数据到hive
- uva--188+模拟
- UILabel sizeWithFont:方法使用明细
- Eclipse安装Drools插件
- linux下静态路由修改命令
- SetFont()修改字体大小及样式的问题