如何在linux/unix中设置线程的优先…
来源:互联网 发布:win10网络断开连接 编辑:程序博客网 时间:2024/05/29 13:30
在linux下我们可以通过
int pthread_create(pthread_t *thread, const pthread_attr_t*attr,
void *(*start_routine)(void*), void *arg);
来创建线程,但是如何设置线程的优先级呢?
在讨论这个问题的时候,我们先要确定当前线程使用的调度策略,posix提供了
int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int*policy);函数来获取所
使用的调度策略,它们是:SCHED_FIFO, SCHED_RR 和SCHED_OTHER。
我们可以使用
int sched_get_priority_max(int policy);
int sched_get_priority_min(int policy);
来获取线程线程可是设置的最大和最小的优先级值,如果调用成功就返回最大和最小的优先级值,否则返回-1。
从我现在运行的linux系统中,我使用下列程序获取了对应三种调度策略中的最大和最小优先级:
policy = SCHED_OTHER
Show current configuration of priority
max_priority = 0
min_priority = 0
Show SCHED_FIFO of priority
max_priority = 99
min_priority = 1
Show SCHED_RR of priority
max_priority = 99
min_priority = 1
Show priority of current thread
priority = 0
Set thread policy
Set SCHED_FIFO policy
policy = SCHED_FIFO
Set SCHED_RR policy
policy = SCHED_RR
Restore current policy
policy = SCHED_OTHER
我们可以看到
SCHED_OTHER是不支持优先级使用的,而SCHED_FIFO和SCHED_RR支持优先级的使用,他们分别为1和99,
数值越大优先级越高。从上面的结果我们可以看出,如果程序控制线程的优先级,一般是用
pthread_attr_getschedpolicy来获取系统使用的调度策略,如果是SCHED_OTHER的话,表明当前策略
不支持线程优先级的使用,否则可以。当然所设定的优先级范围必须在最大和最小值之间。我们可以通过
sched_get_priority_max和sched_get_priority_min来获取。
可能网友会问,是否我们可以通过
int pthread_attr_setschedpolicy(pthread_attr_t *attr, intpolicy);来设定自己所需的
调度策略呢?我觉得是完全可以的(有些系统需要定义_POSIX_THREAD_PRIORITY_SCHEDULING),只要
系统实现了对应的调用策略。
说了半天,我们还没有说,在系统允许使用线程优先级别的时候,如何设置优先级别呢?
int pthread_attr_setschedparam(pthread_attr_t *attr,
const struct sched_param *param);
int pthread_attr_getschedparam(const pthread_attr_t *attr,
struct sched_param *param);
上面两个函数分别用于设置线程的优先级,structsched_param的定义如下
struct sched_param
{
int __sched_priority; //所要设定的线程优先级
};
使用的测试程序:
#include <iostream>
#include <pthread.h>
#include <sched.h>
#include <assert.h>
using namespace std;
static int get_thread_policy( pthread_attr_t &attr)
{
int policy;
int rs = pthread_attr_getschedpolicy( &attr,&policy );
assert( rs == 0 );
switch ( policy )
{
case SCHED_FIFO:
cout << "policy = SCHED_FIFO"<< endl;
break;
case SCHED_RR:
cout << "policy = SCHED_RR"<< endl;
break;
case SCHED_OTHER:
cout << "policy = SCHED_OTHER"<< endl;
break;
default:
cout << "policy = UNKNOWN"<< endl;
break;
}
return policy;
}
static void show_thread_priority( pthread_attr_t&attr, int policy )
{
int priority = sched_get_priority_max( policy );
assert( priority != -1 );
cout << "max_priority = "<< priority<< endl;
priority = sched_get_priority_min( policy );
assert( priority != -1 );
cout << "min_priority = "<< priority<< endl;
}
static int get_thread_priority( pthread_attr_t&attr )
{
struct sched_param param;
int rs = pthread_attr_getschedparam( &attr,¶m );
assert( rs == 0 );
cout << "priority = "<< param.__sched_priority<< endl;
return param.__sched_priority;
}
static void set_thread_policy( pthread_attr_t&attr, int policy )
{
int rs = pthread_attr_setschedpolicy( &attr, policy);
assert( rs == 0 );
get_thread_policy( attr );
}
int main( void )
{
pthread_attr_t attr;
struct sched_param sched;
int rs;
rs = pthread_attr_init( &attr );
assert( rs == 0 );
int policy = get_thread_policy( attr );
cout << "Show current configurationof priority" << endl;
show_thread_priority( attr, policy );
cout << "Show SCHED_FIFO of priority"<< endl;
show_thread_priority( attr, SCHED_FIFO );
cout << "Show SCHED_RR of priority"<< endl;
show_thread_priority( attr, SCHED_RR );
cout << "Show priority of currentthread" << endl;
int priority = get_thread_priority( attr );
cout << "Set thread policy"<< endl;
cout << "Set SCHED_FIFO policy"<< endl;
set_thread_policy( attr, SCHED_FIFO );
cout << "Set SCHED_RR policy"<< endl;
set_thread_policy( attr, SCHED_RR );
cout << "Restore current policy"<< endl;
set_thread_policy( attr, policy );
rs = pthread_attr_destroy( &attr );
assert( rs == 0 );
return 0;
}
int pthread_create(pthread_t *thread, const pthread_attr_t*attr,
void *(*start_routine)(void*), void *arg);
来创建线程,但是如何设置线程的优先级呢?
在讨论这个问题的时候,我们先要确定当前线程使用的调度策略,posix提供了
int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int*policy);函数来获取所
使用的调度策略,它们是:SCHED_FIFO, SCHED_RR 和SCHED_OTHER。
我们可以使用
int sched_get_priority_max(int policy);
int sched_get_priority_min(int policy);
来获取线程线程可是设置的最大和最小的优先级值,如果调用成功就返回最大和最小的优先级值,否则返回-1。
从我现在运行的linux系统中,我使用下列程序获取了对应三种调度策略中的最大和最小优先级:
policy = SCHED_OTHER
Show current configuration of priority
max_priority = 0
min_priority = 0
Show SCHED_FIFO of priority
max_priority = 99
min_priority = 1
Show SCHED_RR of priority
max_priority = 99
min_priority = 1
Show priority of current thread
priority = 0
Set thread policy
Set SCHED_FIFO policy
policy = SCHED_FIFO
Set SCHED_RR policy
policy = SCHED_RR
Restore current policy
policy = SCHED_OTHER
我们可以看到
SCHED_OTHER是不支持优先级使用的,而SCHED_FIFO和SCHED_RR支持优先级的使用,他们分别为1和99,
数值越大优先级越高。从上面的结果我们可以看出,如果程序控制线程的优先级,一般是用
pthread_attr_getschedpolicy来获取系统使用的调度策略,如果是SCHED_OTHER的话,表明当前策略
不支持线程优先级的使用,否则可以。当然所设定的优先级范围必须在最大和最小值之间。我们可以通过
sched_get_priority_max和sched_get_priority_min来获取。
可能网友会问,是否我们可以通过
int pthread_attr_setschedpolicy(pthread_attr_t *attr, intpolicy);来设定自己所需的
调度策略呢?我觉得是完全可以的(有些系统需要定义_POSIX_THREAD_PRIORITY_SCHEDULING),只要
系统实现了对应的调用策略。
说了半天,我们还没有说,在系统允许使用线程优先级别的时候,如何设置优先级别呢?
int pthread_attr_setschedparam(pthread_attr_t *attr,
const struct sched_param *param);
int pthread_attr_getschedparam(const pthread_attr_t *attr,
struct sched_param *param);
上面两个函数分别用于设置线程的优先级,structsched_param的定义如下
struct sched_param
{
int __sched_priority; //所要设定的线程优先级
};
使用的测试程序:
#include <iostream>
#include <pthread.h>
#include <sched.h>
#include <assert.h>
using namespace std;
static int get_thread_policy( pthread_attr_t &attr)
{
int policy;
int rs = pthread_attr_getschedpolicy( &attr,&policy );
assert( rs == 0 );
switch ( policy )
{
case SCHED_FIFO:
cout << "policy = SCHED_FIFO"<< endl;
break;
case SCHED_RR:
cout << "policy = SCHED_RR"<< endl;
break;
case SCHED_OTHER:
cout << "policy = SCHED_OTHER"<< endl;
break;
default:
cout << "policy = UNKNOWN"<< endl;
break;
}
return policy;
}
static void show_thread_priority( pthread_attr_t&attr, int policy )
{
int priority = sched_get_priority_max( policy );
assert( priority != -1 );
cout << "max_priority = "<< priority<< endl;
priority = sched_get_priority_min( policy );
assert( priority != -1 );
cout << "min_priority = "<< priority<< endl;
}
static int get_thread_priority( pthread_attr_t&attr )
{
struct sched_param param;
int rs = pthread_attr_getschedparam( &attr,¶m );
assert( rs == 0 );
cout << "priority = "<< param.__sched_priority<< endl;
return param.__sched_priority;
}
static void set_thread_policy( pthread_attr_t&attr, int policy )
{
int rs = pthread_attr_setschedpolicy( &attr, policy);
assert( rs == 0 );
get_thread_policy( attr );
}
int main( void )
{
pthread_attr_t attr;
struct sched_param sched;
int rs;
rs = pthread_attr_init( &attr );
assert( rs == 0 );
int policy = get_thread_policy( attr );
cout << "Show current configurationof priority" << endl;
show_thread_priority( attr, policy );
cout << "Show SCHED_FIFO of priority"<< endl;
show_thread_priority( attr, SCHED_FIFO );
cout << "Show SCHED_RR of priority"<< endl;
show_thread_priority( attr, SCHED_RR );
cout << "Show priority of currentthread" << endl;
int priority = get_thread_priority( attr );
cout << "Set thread policy"<< endl;
cout << "Set SCHED_FIFO policy"<< endl;
set_thread_policy( attr, SCHED_FIFO );
cout << "Set SCHED_RR policy"<< endl;
set_thread_policy( attr, SCHED_RR );
cout << "Restore current policy"<< endl;
set_thread_policy( attr, policy );
rs = pthread_attr_destroy( &attr );
assert( rs == 0 );
return 0;
}
0 0
- 如何在linux/unix中设置线程的优先…
- 如何在linux/unix中设置线程的优先级
- 如何在linux/unix中设置线程的优先级
- 如何在linux/unix中设置线程的优先级
- 如何在linux/unix中设置线程的优先级
- 如何在linux/unix中设置线程的优先级
- 在Linux中设置线程的优先级
- 在Linux中设置线程的优先级
- 在Linux/unix中设置环境变量
- 如何设置UNIX/Linux中新创建目录或文件的默认权限
- 如何设置UNIX/Linux中新创建目录或文件的默认权限
- 如何在UNIX/LINUX环境中创建Oracle9i 数据库
- 如何在UNIX/LINUX环境中创建Oracle9i 数据库
- 如何在Window或Linux/Unix中查找并干掉占用指定端口的进程
- Linux/Unix 中如何在复制一个目录时排除其中的某个文件
- Linux/Unix中如何在复制一个目录时排除其中的某个文件
- Linux/Unix 编程中 POSIX 函数的线程安全问题
- Linux/Unix 编程中 POSIX 函数的线程安全问题
- 编程修养-C语言篇(上)(转)
- linux 线程 进程(转)
- C++/C试题(转)
- mysql ERROR 1017 :Can't find file: '/xxx.frm'...错误的解决方法
- 面向对象的三大特点
- 如何在linux/unix中设置线程的优先…
- linux进程调度方法SCHED_OTHER,SCH…
- 应用中的嵌入式Linux实时优化技巧…
- 常有不规则动词的过去式和过去分词…
- 关于分离线程的一种用法(转)
- C 语言二叉树实现示例(转)
- 智力测试 (转)
- 历史上经典的智力测试(转)
- linux线程基本编程(转)