How crusher for use and maintenance?
来源:互联网 发布:淘宝宠物狗怎么快递 编辑:程序博客网 时间:2024/05/21 09:14
Crusher is a modern, intelligent, humane industrial material crusher machine equipment, continuous, producing a large number of particles of the standard product. There are many types of crushers, in general, the use and maintenance of the following common elements:
1, the crusher should load start, avoid driving under the crusher memory material, otherwise it is easy to cause an accident. Before you start, you should use the human will drive wheel to rotate a tape twice, after confirmation flexible rotation before driving. After the load starts to wait to give the material when the normal operation of the crusher.
2, stopped before the operation, you should stop feeding and emptying machine materials before you can cut off the power. Stop after the accident, after which the material should also eliminate to start. In operation pay attention to the bearing temperature, Wu Shi good bearing lubrication. Also, pay attention to whether the abnormal sound and vibration, and found irregularities should stop and check whether the object is unbreakable stuck, or if mechanical damage.
3, to keep feeding the crusher evenly and prevent overload. Not prevent broken metal and wood objects fall into machine.
4. Check the crushed product size to meet the requirements. Such as the size of the particles exceeds the excess, which may be due to grate gap is too large, the discharge opening too wide, a hammer (jaw or teeth roll) wear, insurance and other reasons too loose spring, appropriate measures should be adopted to eliminate.
5, when the crusher parking, check tightness of fastening bolts, how to wear and easy to wear parts. Tooth roll crusher, it should also take advantage of the opportunity to get rid of parking sandwiched between the teeth of the timber.
6, worn parts (such as jaws, teeth roll, hammer, grate, linings, etc.) should be replaced or repaired.
7, the safety device on the crusher to be kept in good condition, may not start when safety device failure.
other product:such as sand making machine
sand crusher
Crusher is a modern, intelligent, humane industrial material crusher machine equipment, continuous, producing a large number of particles of the standard product. There are many types of crushers, in general, the use and maintenance of the following common elements:
1, the crusher should load start, avoid driving under the crusher memory material, otherwise it is easy to cause an accident. Before you start, you should use the human will drive wheel to rotate a tape twice, after confirmation flexible rotation before driving. After the load starts to wait to give the material when the normal operation of the crusher.
2, stopped before the operation, you should stop feeding and emptying machine materials before you can cut off the power. Stop after the accident, after which the material should also eliminate to start. In operation pay attention to the bearing temperature, Wu Shi good bearing lubrication. Also, pay attention to whether the abnormal sound and vibration, and found irregularities should stop and check whether the object is unbreakable stuck, or if mechanical damage.
3, to keep feeding the crusher evenly and prevent overload. Not prevent broken metal and wood objects fall into machine.
4. Check the crushed product size to meet the requirements. Such as the size of the particles exceeds the excess, which may be due to grate gap is too large, the discharge opening too wide, a hammer (jaw or teeth roll) wear, insurance and other reasons too loose spring, appropriate measures should be adopted to eliminate.
5, when the crusher parking, check tightness of fastening bolts, how to wear and easy to wear parts. Tooth roll crusher, it should also take advantage of the opportunity to get rid of parking sandwiched between the teeth of the timber.
6, worn parts (such as jaws, teeth roll, hammer, grate, linings, etc.) should be replaced or repaired.
7, the safety device on the crusher to be kept in good condition, may not start when safety device failure.
other product:such as sand making machine
sand crusher
1, the crusher should load start, avoid driving under the crusher memory material, otherwise it is easy to cause an accident. Before you start, you should use the human will drive wheel to rotate a tape twice, after confirmation flexible rotation before driving. After the load starts to wait to give the material when the normal operation of the crusher.
2, stopped before the operation, you should stop feeding and emptying machine materials before you can cut off the power. Stop after the accident, after which the material should also eliminate to start. In operation pay attention to the bearing temperature, Wu Shi good bearing lubrication. Also, pay attention to whether the abnormal sound and vibration, and found irregularities should stop and check whether the object is unbreakable stuck, or if mechanical damage.
3, to keep feeding the crusher evenly and prevent overload. Not prevent broken metal and wood objects fall into machine.
4. Check the crushed product size to meet the requirements. Such as the size of the particles exceeds the excess, which may be due to grate gap is too large, the discharge opening too wide, a hammer (jaw or teeth roll) wear, insurance and other reasons too loose spring, appropriate measures should be adopted to eliminate.
5, when the crusher parking, check tightness of fastening bolts, how to wear and easy to wear parts. Tooth roll crusher, it should also take advantage of the opportunity to get rid of parking sandwiched between the teeth of the timber.
6, worn parts (such as jaws, teeth roll, hammer, grate, linings, etc.) should be replaced or repaired.
7, the safety device on the crusher to be kept in good condition, may not start when safety device failure.
other product:such as sand making machine
sand crusher
0 0
- How crusher for use and maintenance?
- How to close Magento store for maintenance?
- How to Build and Use libnetfilter_queue for Android
- How to use Hibernate annotations @ManyToOne and @OneToMany for associations
- iPad / iPhone battery correct use and maintenance tips
- iphone have to use common sense and Maintenance
- How to Collect and Display System Statistics (CPU and IO) for CBO use (Doc ID 149560.1)
- Stopping and Restarting Oracle Restart for Maintenance Operations
- 如何使用表维护工具。how to use the table extent maintenance tool
- How to Use JSONKit for iOS and the Rotten Tomatoes API
- [Backup] How to build and use Pansenti / meta-pansenti for Gumstix Overo Ironstorm
- Software Aging and Maintenance
- How to install and use doxygen
- How to Create and Use the DLL
- How To Use Function 'F4_FILENAME' and 'KD_GET_FILENAME_ON_F4'
- standard exception and how to use
- How to use 'SetItemData()' and 'GetItemData()'?
- How to use the CONVERSION_EXIT_PARVW_INPUT and CONVERSION_EXIT_PARVW_OUTPUT
- 笔记85--onCreate中获取控件宽和高
- css的vertical-align属性
- android sdk manager 更新慢解决办法 转自http://blog.csdn.net/exlsunshine/article/details/22208857
- 系统架构试题回顾
- Python 第一章 基础知识(8) 保存并执行程序
- How crusher for use and maintenance?
- Nginx配置proxy_pass转发的/路径问题
- 阴影介绍 the introduction of shadow
- C语言函数调用栈剖析
- 垂直电子商务网站应该如何做网络推广
- ByteArrayStream
- UNIX学习笔记(四)
- Intel格式与Motorola格式的区别
- UVa 725 - Division