openwrt编译进阶
来源：互联网 发布：各国劳动生产率 数据 编辑：程序博客网 时间：2024/05/16 14:48
Openwrt编译进阶
分享到 评论文章目录
- 1.Openwrt基础编译
- 2.Openwrt编译进阶
- 2.1.修改WIFI设置
- 2.2.修改LUCI
- 2.2.1.修改LUCI界面配置
- 2.2.2.添加释放内存
- 2.2.3.在顶栏显示重启
- 2.2.4.在顶栏显示备份/升级
- 2.3.修改配置文件
- 2.3.1.修改root密码
- 2.3.2.修改路由连接数
- 2.3.3.修改主机名，设定时区
- 2.3.4.SAMBA免密码访问
- 2.4.集成软件
- 2.4.1.添加aria2，luci添加，web管理界面
- 2.4.2.添加将自己开发的程序
- 2.5.HG255D个性化配置
- 2.5.1.开启HG255D编译
- 2.5.2.make menuconfig配置
- 2.5.3.开启POWER LED状态指示灯
- 2.5.4.使用RA-MOD软件源
- 2.5.5.添加自动挂载脚本
摘要： 这篇文章是Openwrt编译的学习笔记包括（1）Openwrt基础入门（2）Openwrt基础进阶（3）集成软件
之前总喜欢在在写文章之前写一大段自己的光荣事迹，后来发现看别人这样写的文章是一件很蛋疼的事，毕竟这是一篇技术类文章，不是小学生日记。
好吧，这次直接进入正题，抱歉，又写了一段和本文内容无关的文字……
去年学校开始用H3C认证来限制我们上网，于是好奇心再次害死猫，本宫终于修成正果，误入Openwrt这个大坑，折腾Openwrt有一年多了，到了回馈社会的时候了，这篇文章写写Openwrt编译的一些高级配置（相对入门级编译教程而言），以HG255D为例。
Openwrt基础编译
这类文章一手一大把，精简的，详细的（多半是废话）都有，这里就简单的把一些指令写下
编译环境为Ubuntu#升级组件包sudo apt-get update#安装编译需要的组件sudo apt-get install gcc g++ binutils patch bzip2 flex bison make autoconf gettext texinfo unzip sharutils subversion libncurses5-dev ncurses-term zlib1g-dev git-core gawk asciidoc libz-dev sphinxsearch libtool sphinx-common libssl-dev libsqlite3* intltool libiconv* gstreamer-0.10* glib2.0 libxml2-dev qemu（*64位系统需安装ia32-libs）#使用非root用户登录，建立openwrt目录mkdir openwrt#进入openwrt目录cd openwrt#下载openwrt源码svn checkout svn://svn.openwrt.org/openwrt/trunk#赋予trunk目录权限sudo chmod -R 777 trunk#进入trunk目录cd trunk#更新最新源码./scripts/feeds update -a#安装最新源码./scripts/feeds install -a#更新版本号svn up#进入编译菜单make menuconfigY：选择Y，该软件将被编译，并且加入到你的目标固件里；M：选择M，该软件包将会被编译，但不会被放入固件里。在需要它的时候，可以用OPKG软件包管理器进行安装；N：选择N，该软件包将不会被编译，也不会被安装进固件。方向键是移动光标回车键是确认空格键是选择，可以代替Y/M/N键的使用/:搜索#编译make V=99#清除编译过程产生的临时文件make clean#恢复编译环境make defconfigOpenwrt编译进阶
其实按照上面的指令一路执行下来，你已经能够在/bin/$target下找到刷机固件了,是不是很简单……
修改WIFI设置
package/kernel/mac80211/files/lib/wifi/mac80211.sh
config wifi-device radio$devidx option type mac80211 option channel 11 option hwmode 11ng option path '10180000.wmac' option htmode HT20 list ht_capab GF list ht_capab SHORT-GI-20 list ht_capab SHORT-GI-40 list ht_capab TX-STBC list ht_capab RX-STBC12 # REMOVE THIS LINE TO ENABLE WIFI: option disabled 0 option noscan 1 option txpower 20 option htmode HT40-config wifi-iface option device radio$devidx option network lan option mode ap #自定义SSID为MakeBlaze_MAC后六位 option ssid MakeBlaze_$(cat /sys/class/ieee80211/${dev}/macaddress|awk -F ":" '{print $4""$5""$6 }'| tr a-z A-Z) option encryption none修改LUCI
修改LUCI界面配置
feeds/luci/modules/base/root/etc/config/luci
config core main option resourcebase '/luci-static/resources' #设置默认语言 option lang 'zh_cn' #设置默认主题 option mediaurlbase '/luci-static/bootstrap'#设置可选择的语言 config internal languages option zh_cn 'chinese' option en 'English'#设置可选择的主题config internal themes option Bootstrap '/luci-static/bootstrap'添加释放内存
feeds/luci/modules/admin-full/luasrc/controller/admin/index.lua
function index()+ entry({"admin", "Free_Memory"}, call("Free_Memory"), _("释放内存"), 75)endfunction Free_Memory() luci.util.exec("echo 3 > /proc/sys/vm/drop_caches") luci.http.redirect(luci.dispatcher.build_url("admin", "status", "overview"))end在顶栏显示重启
feeds/luci/modules/admin-full/luasrc/controller/admin/system.lua
function index() entry({"admin", "reboot"}, call("action_reboot"), _("Reboot"), 90)endfeeds/luci/modules/admin-full/luasrc/view/admin_system/reboot.htm
<%:Perform reboot%>
在顶栏显示备份/升级
feeds/luci/modules/admin-full/luasrc/controller/admin/system.lua
function index() entry({"admin", "flashops"}, call("action_flashops"), _("Backup / Flash Firmware"), 70)end修改配置文件
package/base-files/files/etc/
在这个目录里，你可以把你的备份的路由器导入进来
修改root密码
package/base-files/files/etc/shadow
#默认情况下root是没有密码的，需设定密码才能开启sshroot:$1$wEehtjxj$YBu4quNfVUjzfv8p/PBo5.:0:0:99999:7:::修改路由连接数
package/base-files/files/etc/sysctl.conf
net.netfilter.nf_conntrack_max=65535修改主机名，设定时区
package/base-files/files/etc/config/system
config system #设置主机名 option hostname 'MakeBlaze' option conloglevel '8' option cronloglevel '8' #设置时区 option zonename 'Asia/Shanghai' option timezone 'CST-8'#设置时间服务器config timeserver 'ntp' option enable_server '1' list server '210.72.145.44' list server 's1a.time.edu.cn' list server 's1b.time.edu.cn' list server '202.120.2.101'config led 'usb_led' option name 'USB' option sysfs 'hg255d:usb' option trigger 'usbdev' option dev '1-1' option interval '50'config led 'wlan_led' option name 'WLAN' option sysfs 'hg255d:wlan' option trigger 'netdev' option dev 'ra0' option mode 'link tx'config led 'internet_led' option name 'INTERNET' option sysfs 'hg255d:internet' option trigger 'netdev' option dev 'eth0.2' option mode 'tx rx'SAMBA免密码访问
package/base-files/files/etc/config/samba
config samba #显示中文 option charset 'gb2312'config sambashare option read_only 'no' option guest_ok 'yes' option create_mask '0777' option dir_mask '0777' option display charsetpackage/base-files/files/etc/samba/smb.conf.template
[global] netbios name = |NAME| display charset = |CHARSET| interfaces = |INTERFACES| server string = |DESCRIPTION| unix charset = |CHARSET| workgroup = |WORKGROUP| browseable = yes deadtime = 30 domain master = yes encrypt passwords = true enable core files = no guest account = root guest ok = yes #invalid users = root local master = yes load printers = no map to guest = Bad User max protocol = SMB2 min receivefile size = 16384 null passwords = yes obey pam restrictions = yes os level = 20 passdb backend = smbpasswd preferred master = yes printable = no security = share smb encrypt = disabled #smb passwd file = /etc/samba/smbpasswd socket options = TCP_NODELAY IPTOS_LOWDELAY syslog = 2 use sendfile = yes writeable = yes集成软件
添加aria2，luci添加，web管理界面
aria2 http://sourceforge.net/projects/aria2/files/stable/
#aria2的依赖安装sudo apt-get update sudo apt-get install autoconf automake libcppunit-dev autopoint openssl libtool sphinx-common sphinxsearch libgcrypt11-dev #下载aria2源码cd dlsudo apt-get install wgetwget http://sourceforge.net/projects/aria2/files/stable/aria2-1.18.7/aria2-1.18.7.tar.bz2#获取md5码md5sum aria2-1.18.7.tar.bz2#添加luci-aria2这里用的是南浦月的luci-app-aira2和webui-aria2OpenWrt-Extra https://github.com/nanpuyue/openwrt-extra
在feeds.conf.default中添加`src-git extra git://github.com/nanpuyue/openwrt-extra.git`./scripts/feeds update -a./scripts/feeds install -a在make menuconfig中选中aria2，luci-app-aira2和webui-aria2就可以了
添加将自己开发的程序
在package下建立一个文件夹，以自己的项目命名，里边包括一个files文件夹和一个Makefile文件
目录结构<ccnu>├Makefile├<files>│ ├<etc>│ │ ├<config>│ │ │ └ccnu│ │ ├<init.d>│ │ │ └ccnu│ ├<usr>│ │ ├<lib>│ │ │ ├<lua>│ │ │ │ ├<luci>│ │ │ │ │ ├<controller>│ │ │ │ │ │ └ccnu.lua│ │ │ │ │ ├<model>│ │ │ │ │ │ ├<cbi>│ │ │ │ │ │ │ └ccnu.lua│ │ ├<sbin>│ │ │ └ccnupackage/ccnu/Makefile
include $(TOPDIR)/rules.mkPKG_NAME:=ccnuPKG_VERSION:=2.0.1 PKG_RELEASE:=1PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)include $(INCLUDE_DIR)/package.mkdefine Package/ccnu SECTION:=utils CATEGORY:=Utilities SUBMENU:=H3C inode TITLE:= iNode Compatible Client for CCNU DEPENDS:=+libc +libgcc MAINTAINER:= RiceLyn <fjkfwz@gmail.com>endefdefine Package/ccnu/description iNode Compatible Client for CCNUendefdefine Build/Prepareendefdefine Build/Configureendefdefine Build/Compileendefdefine Package/ccnu/install $(CP) ./files/* $(1)/endef$(eval $(call BuildPackage,ccnu))之后./scripts/feeds install -a,ccnu就会出现在Utilities -> H3C inode里啦
这里先做一个简单的程序，以后会写文章详细介绍。
HG255D个性化配置
开启HG255D编译
/target/linux/ramips/image/Makefile去除HG255D前的#
Image/Build/Profile/HG255D=$(call BuildFirmware/Default16M/$(1),$(1),hg255d,HG255D)$(call Image/Build/Profile/HG255D,$(1))make menuconfig配置
#选择编译对象Target System (Ralink RT288x/RT3xxx) —>Subtarget (RT3x5x/RT5350 based boards) —>Target Profile (HuaWei HG255D) —>#添加USB挂载Base system —> <*>block-mount #添加硬盘格式支持Kernel modules —> Filesystems —> <*> kmod-fs-ext4 (移动硬盘EXT4格式选择)Kernel modules —> Filesystems —> <*> kmod-fs-vfat(FAT16 / FAT32 格式 选择)Kernel modules —> Filesystems —> <*> kmod-fs-ntfs (NTFS 格式 选择)#添加USB相关支持Kernel modules —> USB Support —> <*> kmod-usb-core.Kernel modules —> USB Support —> <*> kmod-usb-ohci.Kernel modules —> USB Support —> <*> kmod-usb-storage.Kernel modules —> USB Support —> <*> kmod-usb-storage-extras.Kernel modules —> USB Support —> <*> kmod-usb2.Kernel modules —> USB Support —> <*> kmod-usb3.#添加自动挂载工具Utilities —> Filesystem —> <*> badblocks#添加UTF8编码,CP437编码，ISO8859-1编码Kernel modules —> Native Language Support —> <*> kmod-nls-cp437Kernel modules —> Native Language Support —> <*> kmod-nls-iso8859-1Kernel modules —> Native Language Support —> <*> kmod-nls-utf8#添加SCSI支持Kernel modules —> Block Devices —> <*>kmod-scsi-core#添加LED支持LED modules —>< *> kmod-ledtrig-usbdev…………………………. LED USB device Trigger#添加luciLuCI ->Collections -> <*> luci#添加luci的中文语言包LuCI ->Translations -> <*> luci-i18n-chinese#添加luci应用LuCI ->Applications —> <*> luci-app-aria2……………………………… LuCI Support for aria2LuCI ->Applications —> <*> luci-app-ddns……………………… Dynamic DNS configuration moduleLuCI ->Applications —> <*> luci-app-samba……………….. Network Shares – Samba SMB/CIFS moduleLuCI ->Applications —> <*> luci-app-transmission…………………. LuCI Support for Transmission开启POWER LED状态指示灯
target\linux\ramips\base-files\etc\diag.sh
get_status_led() { case $(ramips_board_name) in+ hg255d)+ status_led="hg255d:power"+ ;;使用RA-MOD软件源
RA-MOD https://github.com/ravageralpha/my_openwrt_mod
feeds.conf.defaultsrc-git ramod git://github.com/ravageralpha/my_openwrt_mod.git#src-git luci http://git.openwrt.org/project/luci.git ./scripts/feeds clean./scripts/update -a./scripts/install -a添加自动挂载脚本
/package/base-files/files/etc/gotplug/block/30-block_mount
#!/bin/sh#---------------------------------------------------------------------# Filename: 30-block_mount# Revision: 0.5.1# Data: Jul. 7, 2014# Email: kevinyu@vip.qq.com# Contacts: QQ/TM 389191 or mail address above# Licensing: General Public License v2# Description: Created for automatic mount block devices on OpenWRT# Usage: Put this script into directory /etc/hotplug.d/block#---------------------------------------------------------------------## Global settings of auto-mount script ### Turn on|off auto-mount function for disk volumesVOL_ENABLED=1 # <0|1 0-Disable, 1-Enable># Turn on|off auto-mount function for sawp partition SWAP_ENABLED=1 # <0|1 0-Disable, 1-Enable># Set which method you want to name the mounted volumesUSE_VLABEL=1 # <0|1 0-Use device name, 1-Use volume label> Eg. /mnt/sda1 | /mnt/DataDisk## Note that if you choose name mount point by volume label but the volume's label is empty,# the volume will be named to 'volume_$PARTUUID', such as the /mnt/volume_31173116-01# Also, if exist more than one device which have the same volume label, it will be renamed # as the original name + sequence number, such as the /mnt/DataDisk_n (n=1,2,3..9)# Show filesystem type as the prefix of mount point, requires set USE_VLABEL=1FSTYPE_IN_VLABEL=1 # <0|1 0-Disable, 1-Enable> Eg. /mnt/[ntfs]-DataDisk# Set access the mounted device with read-write or read-only permissionFS_READONLY=0 # <0|1 0-Read Write, 1-Read Only># Exclusion list of auto-mount function# Allows mixing the device name, volume label and UUID, each item must be separated by space(s)# Eg. EXCLUDE_LIST="sda1 DataDisk f32b2ea6-4d42-43a5-bcec-7d818a163d07" EXCLUDE_LIST="" # Default: empty string# Specify a directory for mountsMOUNTS_PATH="/mnt" # Default: /mnt , don't need include the trailing slash (/)# Define the add-ons scripts directory for automatic executeADDSH_PATH="/etc/hotplug.d/user" # Script naming rule: [0-9][0-9]-xxxxx, Eg. 20-backup-sdcard## End of global settings ### Purge the directory MOUNTS_PATHpurge_mnts(){local i RETVAL[ -d $MOUNTS_PATH ] || return 1for i in $MOUNTS_PATH/* ; do if [ -d $i ] ; then if [ -z "`ls -A $i 2>&-`" ] ; then `grep -qs "$i" /proc/mounts` || { rm -rf $i 2>/dev/null; RETVAL=$?; } if [ $RETVAL -eq 0 ] ; then logger -t Auto-Mount "[Notice] Unused mount point $i was removed" [ "$CLI" = "yes" ] && echo "[Notice] Unused mount point '$i' was removed" else logger -t Auto-Mount "[Error] Remove unused mount point $i failed" [ "$CLI" = "yes" ] && echo "[Error] Remove unused mount point $i failed" fi fi fidone}# Unmount all block deviceumountall(){local i MOUNTSMOUNTS=`grep -os '^/dev/sd[a-z][1-9]' /proc/mounts`for i in $MOUNTS ; do umount -f $i [ $? -eq 0 ] && echo "[Notice] Device $i unmounted" | tee /proc/self/fd/2 | logger -t Auto-Mountdonepurge_mnts}# Detect blkid existsBLKID=`which blkid`if [ $? -ne 0 ] ; then logger -t Auto-Mount "[Error] Unable to mount block devices automatically because 'blkid' does not exist" exit 1fiMOUNTS_PATH=${MOUNTS_PATH%/}[ -z "$ACTION" ] && ACTION=${1##*-}[ -n "$DEVICENAME" ] && DEV=$DEVICENAME || DEV=$2logger -t Auto-Mount "[Debug] action='$ACTION' devicename='$DEV'"case "$ACTION" in add) [ -z "$DEV" ] && { logger -t Auto-Mount "[Error] Missing required arguments: \$devicename"; exit 1; } if [ -n "$EXCLUDE_LIST" ] ; then UUID=`$BLKID -s UUID /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '` VLABEL=`$BLKID -d -s LABEL /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '` for i in $EXCLUDE_LIST ; do ignore=0 if `echo "$i" | grep -qs '^sd[a-z][1-9]$'` ; then # is device name [ $i = $DEV ] && ignore=1 elif `echo "$i" | grep -Eiqs '^[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}$'` ; then # is UUID [ $i = $UUID ] && ignore=1 else # as volume label [ $i = $VLABEL ] && ignore=1 fi [ $ignore -eq 1 ] && { logger -t Auto-Mount "[Notice] Device $DEV is ignored because it in exclusion list"; exit 0; } done fi if `echo "$DEV" | grep -qs '^sd[a-z][1-9]$'` ; then [ -z "$VLABEL" ] && VLABEL=`$BLKID -d -s LABEL /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '` [ -z "$VLABEL" ] && VLABEL="unknown" FSTYPE=`$BLKID -s TYPE /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '` logger -t Auto-Mount "[Debug] devicename='$DEV' volume_label='$VLABEL' fstype='$FSTYPE'" MCMD="" # set default value [ $FS_READONLY -eq 1 ] && acs="ro" || acs="rw" case "$FSTYPE" in ext[234]) if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then MCMD="mount -t $FSTYPE -o ${acs},noatime" fi ;; xfs|reiserfs) if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then MCMD="mount -t $FSTYPE -o ${acs},noatime" fi ;; iso9660|udf) if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then MCMD="mount -t $FSTYPE -o ro" fi ;; vfat|msdos) if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then MCMD="mount -t $FSTYPE -o ${acs},codepage=936,umask=000" #iocharset=utf8 fi ;; exfat) if `grep -Eqs '^[[:space:]]+fuseblk$' /proc/filesystems` && `which mount.exfat >/dev/null` ; then MCMD="mount.exfat -o ${acs},iocharset=cp936,umask=000" fi ;; ntfs) if `grep -Eqs '^[[:space:]]+fuseblk$' /proc/filesystems` && `which mount.ntfs-3g >/dev/null` ; then MCMD="mount -t ntfs-3g -o ${acs},noatime,big_writes,async,umask=000" fi ;; swap) [ $SWAP_ENABLED -ne 1 ] && exit 0 if [ `grep -vs '^Filename' /proc/swaps | wc -l` -eq 0 ] ; then MCMD="swapon /dev/$DEV" fi ;; *) MCMD="" ;; esac [ $VOL_ENABLED -ne 1 ] && exit 0 if [ $FSTYPE = "swap" ] ; then MOPT="" elif [ $FSTYPE = "iso9660" -o $FSTYPE = "udf" ] ; then CDROM="cdrom" if `grep -qs "$MOUNTS_PATH/$CDROM " /proc/mounts` ; then SUFFIX=1 while `grep -qs "$MOUNTS_PATH/$CDROM " /proc/mounts` ; do [ $SUFFIX -lt 10 ] && CDROM="${CDROM%_*}_$SUFFIX" || { CDROM="${CDROM%_*}_99"; break; } let SUFFIX++ done fi MPOINT=$CDROM else if [ $USE_VLABEL -eq 1 ] ; then if [ $VLABEL = "unknown" ] ; then PARTUUID=`$BLKID -s PARTUUID /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '` [ -z "$PARTUUID" ] && PARTUUID=`cat /proc/sys/kernel/random/uuid | cut -f1 -d'-'` VLABEL="volume_${PARTUUID}" elif `grep -qis "$MOUNTS_PATH/$VLABEL " /proc/mounts` ; then SUFFIX=1 while `grep -qis "$MOUNTS_PATH/$VLABEL " /proc/mounts` ; do if [ $SUFFIX -lt 10 ] ; then VLABEL="$(echo "$VLABEL" | sed 's/_[0-9]\+$//')_$SUFFIX" let SUFFIX++ else VLABEL="$(echo "$VLABEL" | sed 's/_[0-9]\+$//')_99" break fi done fi [ $FSTYPE_IN_VLABEL -eq 1 ] && MPOINT="[${FSTYPE}]-${VLABEL}" || MPOINT=$VLABEL else MPOINT=$DEV fi MOPT="/dev/$DEV $MOUNTS_PATH/$MPOINT" fi if [ -n "$MCMD" ] ; then if ! `grep -qs '/dev/$DEV' /proc/mounts` ; then [ $FSTYPE = "swap" ] || { [ -d $MOUNTS_PATH/$MPOINT ] || mkdir -p $MOUNTS_PATH/$MPOINT; } logger -t Auto-Mount "[Debug] MountCMD='$MCMD $MOPT'" # echo "[Debug] MountCMD='$MCMD $MOPT'" >> /tmp/auto-mount-debug $MCMD $MOPT RETVAL=$? if [ $FSTYPE = "swap" ] ; then if [ $RETVAL -eq 0 ] ; then logger -t Auto-Mount "[Notice] Swap device /dev/$DEV turned on" fi else if [ $RETVAL -eq 0 ] ; then logger -t Auto-Mount "[Notice] Block device /dev/$DEV mounted on $MOUNTS_PATH/$MPOINT" else logger -t Auto-Mount "[Warning] Re-try mount the block device /dev/$DEV after 2 seconds..." sleep 2 $MCMD $MOPT if [ $? -eq 0 ] ; then logger -t Auto-Mount "[Notice] Block device /dev/$DEV mounted on $MOUNTS_PATH/$MPOINT" else rm -rf $MOUNTS_PATH/$MPOINT 2>/dev/null logger -t Auto-Mount "[Error] Mount block device /dev/$DEV encounters an error" exit 1 fi fi fi fi else if [ $FSTYPE = "swap" ] ; then logger -t Auto-Mount "[Notice] Swap device /dev/$DEV was ignored" else logger -t Auto-Mount "[Error] Unsupported filesystem '$FSTYPE' on /dev/$DEV" fi fi unset MCMD fi purge_mnts ;; remove) [ -z "$DEV" ] && { logger -t Auto-Mount "[Error] Missing required arguments: \$devicename"; exit 1; } if `echo "$DEV" | grep -qs '^sd[a-z][1-9]$'` ; then if `grep -qs '/dev/$DEV' /proc/mounts` ; then MPATH=`awk -F ' ' '/\/dev\/'"$DEV"'/ {print $2}' /proc/mounts 2>/dev/null` umount /dev/$DEV [ $? -eq 0 ] && logger -t Auto-Mount "[Notice] Block device $DEV unmounted" [ -d "$MPATH" ] && rm -rf $MPATH 2>/dev/null fi if `grep -qs '/dev/$DEV' /proc/swaps` ; then swapoff $DEV [ $? -eq 0 ] && logger -t Auto-Mount "[Notice] Swap device $DEV turned off" fi fi purge_mnts ;; umountall) CLI="yes" umountall ;; purge) CLI="yes" purge_mnts ;; *) echo "[Error] ** Invalid action arguments: $ACTION" | tee /proc/self/fd/2 | logger -t Auto-Mount ;;esac## Execute the add-ons script# ADDSH_PATH="$(cd "$(dirname "$0")"; cd ..; pwd)/user"if [ -n "`ls -A $ADDSH_PATH 2>&-`" ]; then i=0 for addsh in ${ADDSH_PATH}/[0-9][0-9]-* ; do [ $i -eq 0 ] && logger -t Auto-Mount "[Notice] -- Execute additional scripts ..." logger -t Hotplug-Debug "-- Exec script - $addsh" sh $addsh $ACTION $DEV let i++ donefi# Script EOF 0 0
- openwrt 编译进阶
- openwrt编译进阶
- Openwrt编译进阶
- Openwrt编译进阶
- openwrt进阶
- openwrt进阶
- [OpenWrt] 如何编译OpenWrt
- [OpenWrt] 编译OpenWrt-Dreambox
- openwrt 编译
- openwrt编译
- 编译OpenWrt
- openwrt 编译
- OPENWRT编译
- OpenWRT 编译
- OPenWRT编译
- [OpenWrt] openwrt编译过程(luci)
- [OpenWrt] 新版OpenWrt编译教程
- [OpenWrt] openwrt编译过程(luci)
- c#中的Main方法
- 表情开发
- Jquery mobile各种折叠块及图表的例子
- dns
- query 相关操作
- openwrt编译进阶
- .net mvc4 利用 kindeditor 上传本地图片
- Android 中数据库查询方法 query() 中的 selectionArgs 的用法
- 在iOS项目中引入MVVM
- ios开发之网络编程
- 汇编语言课本习题 p112 3.30
- DOM对象和JQuery对象的区别
- mysql 隔离级别与锁
- eclipse加载maven工程提示pom.xml无法解析org.apache.maven.plugins:maven-resources-plugin:2.4.3解决方案
