gitlab安装手册官方修正版(转)
来源:互联网 发布:淘宝发布图片规则 编辑:程序博客网 时间:2024/05/02 04:17
原文地址:http://www.itzhoulin.com/gitlab/
Installation
Select Version to Install
Make sure you view this installation guide from the branch (version) of GitLab you would like to install. In most cases this should be the highest numbered stable branch (example shown below).
If the highest number stable branch is unclear please check the GitLab Blog for installation guide links by version.
Overview
The GitLab installation consists of setting up the following components:
- Packages / Dependencies
- Ruby
- System Users
- Database
- GitLab
- Nginx
1. Packages / Dependencies
sudo is not installed on Debian by default. Make sure your system is
up-to-date and install it.
# run as root! apt-get update -y apt-get upgrade -y apt-get install sudo -y# Install vim and set as default editor sudo apt-get install -y vim sudo update-alternatives --set editor /usr/bin/vim.basic
#Install the required packages (needed to compile Ruby and native extensions to Ruby gems):
sudo apt-get install -y build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl openssh-server redis-server checkinstall libxml2-dev libxslt-dev libcurl4-openssl-dev libicu-dev logrotate python-docutils
#Make sure you have the right version of Git installed
# Install Git sudo apt-get install -y git-core # Make sure Git is version 1.7.10 or higher, for example 1.7.12 or 2.0.0 git --version
Is the system packaged Git too old? Remove it and compile from source. # Remove packaged Git sudo apt-get remove git-core # Install dependencies sudo apt-get install -y libcurl4-openssl-dev libexpat1-dev gettext libz-dev libssl-dev build-essential # Download and compile from source cd /tmp curl --progress https://www.kernel.org/pub/software/scm/git/git-2.0.0.tar.gz | tar xz cd git-2.0.0/ make prefix=/usr/local all # Install into /usr/local/bin sudo make prefix=/usr/local install # When editing config/gitlab.yml (Step 5), change the git bin_path to /usr/local/bin/git
# Remove packaged Git sudo apt-get remove git-core # Install dependencies sudo apt-get install -y libcurl4-openssl-dev libexpat1-dev gettext libz-dev libssl-dev build-essential # Download and compile from source cd /tmp curl --progress https://www.kernel.org/pub/software/scm/git/git-2.0.0.tar.gz | tar xz cd git-2.0.0/ make prefix=/usr/local all # Install into /usr/local/bin sudo make prefix=/usr/local install # When editing config/gitlab.yml (Step 5), change the git bin_path to /usr/local/bin/git
Note: In order to receive mail notifications, make sure to install a mail server. By default, Debian is shipped with exim4 whereas Ubuntu does not ship with one. The recommended mail server is postfix and you can install it with:
sudo apt-get install -y postfix
Then select ‘Internet Site’ and press enter to confirm the hostname.
2. Ruby
The use of ruby version managers such as RVM, rbenv orchruby with GitLab in production frequently leads to hard to diagnose problems. For example, GitLab Shell is called from OpenSSH and having a version manager can prevent pushing and pulling over SSH. Version managers are not supported and we stronly advise everyone to follow the instructions below to use a system ruby.
Remove the old Ruby 1.8 if present
sudo apt-get remove ruby1.8Download Ruby and compile it:
mkdir /tmp/ruby && cd /tmp/ruby curl --progress http://ruby.taobao.org/mirrors/ruby/ruby-2.1.2.tar.gz | tar xz cd ruby-2.1.2 ./configure --disable-install-rdoc make sudo make installInstall the Bundler Gem:sudo gem install bundler --no-ri --no-rdoc
3. System Users
Create a git
user for Gitlab:
sudo adduser --disabled-login --gecos 'GitLab' git
4. Database
We recommend using a PostgreSQL database. For MySQL check MySQL setup guide. Note: because we need to make use of extensions you need at least pgsql 9.1.
# Install the database packages sudo apt-get install -y postgresql-9.1 postgresql-client libpq-dev # Login to PostgreSQL sudo -u postgres psql -d template1 # Create a user for GitLab. template1=# CREATE USER git CREATEDB; # Create the GitLab production database & grant all privileges on database template1=# CREATE DATABASE gitlabhq_production OWNER git; # Quit the database session template1=# \q # Try connecting to the new database with the new user sudo -u git -H psql -d gitlabhq_production #修改git账户的密码,后面连接数据库的时候要用到 alter user git with password 'new password' ;
5. GitLab
We’ll install GitLab into home directory of the user “git”
cd /home/git
5.1 Clone the Source
# Clone GitLab repository sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-1-stable gitlab # Go to gitlab dir cd /home/git/gitlab
# Clone GitLab repository sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-1-stable gitlab # Go to gitlab dir cd /home/git/gitlab
5.2 Configure it
cd /home/git/gitlab # Copy the example GitLab config sudo -u git -H cp config/gitlab.yml.example config/gitlab.yml # Make sure to change "localhost" to the fully-qualified domain name of your # host serving GitLab where necessary # # If you want to use https make sure that you set `https` to `true`. See #using-https for all necessary details. # # If you installed Git from source, change the git bin_path to /usr/local/bin/git sudo -u git -H editor config/gitlab.yml # Make sure GitLab can write to the log/ and tmp/ directories sudo chown -R git log/ sudo chown -R git tmp/ sudo chmod -R u+rwX log/ sudo chmod -R u+rwX tmp/ # Create directory for satellites sudo -u git -H mkdir /home/git/gitlab-satellites sudo chmod u+rwx,g=rx,o-rwx /home/git/gitlab-satellites # Make sure GitLab can write to the tmp/pids/ and tmp/sockets/ directories sudo chmod -R u+rwX tmp/pids/ sudo chmod -R u+rwX tmp/sockets/ # Make sure GitLab can write to the public/uploads/ directory sudo chmod -R u+rwX public/uploads # Copy the example Unicorn config sudo -u git -H cp config/unicorn.rb.example config/unicorn.rb # Enable cluster mode if you expect to have a high load instance # Ex. change amount of workers to 3 for 2GB RAM server sudo -u git -H editor config/unicorn.rb # Copy the example Rack attack config sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb # Configure Git global settings for git user, useful when editing via web # Edit user.email according to what is set in gitlab.yml sudo -u git -H git config --global user.name "GitLab" sudo -u git -H git config --global user.email "example@example.com" sudo -u git -H git config --global core.autocrlf input
5.3 Configure GitLab DB settings
# PostgreSQL only: sudo -u git cp config/database.yml.postgresql config/database.yml # MySQL only: sudo -u git cp config/database.yml.mysql config/database.yml # MySQL and remote PostgreSQL only: # Update username/password in config/database.yml. # You only need to adapt the production settings (first part). # If you followed the database guide then please do as follows: # Change 'secure password' with the value you have given to $password # You can keep the double quotes around the password sudo -u git -H editor config/database.yml # PostgreSQL and MySQL: # Make config/database.yml readable to git only sudo -u git -H chmod o-rwx config/database.yml
5.4 Install Gems
#首先修改Ruby的源地址到ruby.taobao.org,官方托管再aws上的由于GFW太慢了 gem source -r https://rubygems.org/ gem source -a http://ruby.taobao.org/ #安装bundle sudo gem install bundler --no-ri --no-rdoc #验证bundle的版本是否不小于1.5.2 bundle --version #在执行bundle install前依然要修改bundle的源 #编辑Gemfile,将第一行sources的值修改为http://ruby.taobao.org/ sudo -u git -H editor Gemfile cd /home/git/gitlab # For PostgreSQL (note, the option says "without ... mysql") sudo -u git -H bundle install --deployment --without development test mysql aws # Or if you use MySQL (note, the option says "without ... postgres") sudo -u git -H bundle install --deployment --without development test postgres aws
5.5 Install GitLab shell
# Go to the Gitlab installation folder: cd /home/git/ #下载gitlab-shell源码 sudo -u git -H git clone https://github.com/gitlabhq/gitlab-shell.git cd gitlab-shell #选取v1.9.7版本 sudo git checkout v1.9.7 #生成配置文件 sudo -u git -H cp config.yml.example config.yml #修改 gitlab-shell 配置文件: sudo -u git -H editor config.yml #如果只使用普通 HTTP 方式访问的话,只需设置 Gitlab 站点的 URL 即可:
注意这里的参考值写了端口,务必与后续配置nginx时候的端口(6.2)要一直gitlab_url: "http://gitlab.yoursite.com/" 安装 GitLab Shell sudo -u git -H ./bin/install # By default, the gitlab-shell config is generated from your main gitlab config. # # Note: When using GitLab with HTTPS please change the following: # - Provide paths to the certificates under `ca_file` and `ca_path` options. # - The `gitlab_url` option must point to the https endpoint of GitLab. # - In case you are using self signed certificate set `self_signed_cert` to `true`. # See #using-https for all necessary details. # # You can review (and modify) the gitlab-shell config as follows:
5.6 Initialize Database and Activate Advanced Features
sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production # Type 'yes' to create the database tables. # When done you see 'Administrator account created:'
5.7 Install Init Script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
And if you are installing with a non-default folder or user copy and edit the defaults file:
sudo cp lib/support/init.d/gitlab.default.example /etc/default/gitlab
If you installed gitlab in another directory or as a user other than the default you should change these settings in /etc/default/gitlab. Do not edit /etc/init.d/gitlab as it will be changed on upgrade.
Make GitLab start on boot:
sudo update-rc.d gitlab defaults 21
5.8 Set up logrotate
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
5.9 Check Application Status
Check if GitLab and its environment are configured correctly: sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
5.10 Compile assets
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
5.11 Start Your GitLab Instance
sudo service gitlab start # or sudo /etc/init.d/gitlab restart
6. Nginx
Note: Nginx is the officially supported web server for GitLab. If you cannot or do not want to use Nginx as your web server, have a look at theGitLab recipes.6.1 Installation
sudo apt-get install -y nginx
6.2 Site Configuration
Copy the example site config:
sudo cp lib/support/nginx/gitlab /etc/nginx/sites-available/gitlabsudo ln -s /etc/nginx/sites-available/gitlab /etc/nginx/sites-enabled/gitlab
Make sure to edit the config file to match your setup: # Change YOUR_SERVER_FQDN to the fully-qualified # domain name of your host serving GitLab. sudo editor /etc/nginx/sites-available/gitlab
Note: If you want to use https, replace the
gitlab
nginx config with
gitlab-ssl
6.3 Restart
sudo service nginx restart
Done!
Double-check Application Status
To make sure you didn’t miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations on successfully installing GitLab!
- gitlab安装手册官方修正版(转)
- Centos中安装rabbitmq官方修正版
- GitLab 官方安装文档中文翻译
- Gitlab CE 8.1.3 安装手册汉化版
- PHP ADODB1.99版手册 (修正版)
- 微信支付官方demo修正版
- 如何查找BES服务器官方安装手册
- Thrift官方安装手册(译)
- Thrift官方安装手册(译)
- Thrift官方安装手册(译)
- [转]KFS官方部署手册
- CentOS安装gitLab社区版
- gitlab安装
- gitlab安装
- GitLab安装
- gitlab安装
- 安装gitlab
- gitlab安装
- POJ 3140 Contestants Division(树形DP)
- Activity的四种加载模式
- iOS UIAppearance使用详解,app的ui全局效果
- alsa分析:alsa的那些配置文件1
- 百度云如何自动备份同步文件
- gitlab安装手册官方修正版(转)
- 求矩阵的局部极大值(15)
- 欧几里得算法与扩展欧几里得算法
- MainLoop.c (2)函数SendQuery 和 HandleSlashCmds
- alsa分析:alsa的那些配置文件2
- Common Subsequence(最长公共子序列)
- 关于unity动态添加游戏对象问题,如何动态添加一个菜单【二】
- Wireshark学习FTP流程
- PAT 1010. 一元多项式求导 (25)