initramfs对应的init脚本文件,解压后可见
来源:互联网 发布:色情网页站 源码 wap 编辑:程序博客网 时间:2024/06/10 02:38
cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=cb57e3e8-6f60-42c1-863d-1617454d360e ro quiet splash vt.handoff=7
下面是init脚本内容,cp来源与/usr/share/initram-tools/init。
(具体见mkinitramfs脚本命令。)
#!/bin/sh
[ -d /dev ] || mkdir -m 0755 /dev
[ -d /root ] || mkdir -m 0700 /root
[ -d /sys ] || mkdir /sys
[ -d /proc ] || mkdir /proc
[ -d /tmp ] || mkdir /tmp
mkdir -p /var/lock
mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
mount -t proc -o nodev,noexec,nosuid proc /proc
# Some things don't work properly without /etc/mtab.
ln -sf /proc/mounts /etc/mtab
grep -q '\<quiet\>' /proc/cmdline || echo "Loading, please wait..."
# Note that this only becomes /dev on the real filesystem if udev's scripts
# are used; which they will be, but it's worth pointing out
if ! mount -t devtmpfs -o mode=0755 udev /dev; then
echo "W: devtmpfs not available, falling back to tmpfs for /dev"
mount -t tmpfs -o mode=0755 udev /dev
[ -e /dev/console ] || mknod -m 0600 /dev/console c 5 1
[ -e /dev/null ] || mknod /dev/null c 1 3
fi
mkdir /dev/pts
mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts || true
mount -t tmpfs -o "noexec,nosuid,size=10%,mode=0755" tmpfs /run
mkdir /run/initramfs
# compatibility symlink for the pre-oneiric locations
ln -s /run/initramfs /dev/.initramfs
# Export the dpkg architecture
export DPKG_ARCH=
. /conf/arch.conf
# Set modprobe env
export MODPROBE_OPTIONS="-qb"
# Export relevant variables
export ROOT=
export ROOTDELAY=
export ROOTFLAGS=
export ROOTFSTYPE=
export IP=
export BOOT=
export BOOTIF=
export UBIMTD=
export break=
export init=/sbin/init
export quiet=n
export readonly=y
export rootmnt=/root
export debug=
export panic=
export blacklist=
export resume=
export resume_offset=
export recovery=
# mdadm needs hostname to be set. This has to be done before the udev rules are called!
if [ -f "/etc/hostname" ]; then
/bin/hostname -b -F /etc/hostname 2>&1 1>/dev/null
fi
# Bring in the main config
. /conf/initramfs.conf
for conf in conf/conf.d/*; do
[ -f ${conf} ] && . ${conf}
done
. /scripts/functions
# Parse command line options
for x in $(cat /proc/cmdline); do
case $x in
init=*)
init=${x#init=}
;;
root=*)
ROOT=${x#root=}
case $ROOT in
LABEL=*)
ROOT="${ROOT#LABEL=}"
# support any / in LABEL= path (escape to \x2f)
case "${ROOT}" in
*/*)
if command -v sed >/dev/null 2>&1; then
ROOT="$(echo ${ROOT} | sed 's,/,\\x2f,g')"
else
if [ "${ROOT}" != "${ROOT#/}" ]; then
ROOT="\x2f${ROOT#/}"
fi
if [ "${ROOT}" != "${ROOT%/}" ]; then
ROOT="${ROOT%/}\x2f"
fi
IFS='/'
newroot=
for s in $ROOT; do
newroot="${newroot:+${newroot}\\x2f}${s}"
done
unset IFS
ROOT="${newroot}"
fi
esac
ROOT="/dev/disk/by-label/${ROOT}"
;;
UUID=*)
ROOT="/dev/disk/by-uuid/${ROOT#UUID=}" #这里的by-uuid和grub里面的一样!
;;
/dev/nfs)
[ -z "${BOOT}" ] && BOOT=nfs
;;
esac
;;
rootflags=*)
ROOTFLAGS="-o ${x#rootflags=}"
;;
rootfstype=*)
ROOTFSTYPE="${x#rootfstype=}"
;;
rootdelay=*)
ROOTDELAY="${x#rootdelay=}"
case ${ROOTDELAY} in
*[![:digit:].]*)
ROOTDELAY=
;;
esac
;;
resumedelay=*)
RESUMEDELAY="${x#resumedelay=}"
;;
loop=*)
LOOP="${x#loop=}"
;;
loopflags=*)
LOOPFLAGS="-o ${x#loopflags=}"
;;
loopfstype=*)
LOOPFSTYPE="${x#loopfstype=}"
;;
cryptopts=*)
cryptopts="${x#cryptopts=}"
;;
nfsroot=*)
NFSROOT="${x#nfsroot=}"
;;
netboot=*)
NETBOOT="${x#netboot=}"
;;
ip=*)
IP="${x#ip=}"
;;
boot=*)
BOOT=${x#boot=}
;;
ubi.mtd=*)
UBIMTD=${x#ubi.mtd=}
;;
resume=*)
RESUME="${x#resume=}"
;;
resume_offset=*)
resume_offset="${x#resume_offset=}"
;;
noresume)
noresume=y
;;
panic=*)
panic="${x#panic=}"
case ${panic} in
*[![:digit:].]*)
panic=
;;
esac
;;
quiet)
quiet=y
;;
ro)
readonly=y
;;
rw)
readonly=n
;;
debug)
debug=y
quiet=n
exec >/run/initramfs/initramfs.debug 2>&1
set -x
;;
debug=*)
debug=y
quiet=n
set -x
;;
break=*)
break=${x#break=}
;;
break)
break=premount
;;
blacklist=*)
blacklist=${x#blacklist=}
;;
netconsole=*)
netconsole=${x#netconsole=}
;;
BOOTIF=*)
BOOTIF=${x#BOOTIF=}
;;
hwaddr=*)
BOOTIF=${x#BOOTIF=}
;;
recovery)
recovery=y
;;
esac
done
if [ -n "${noresume}" ]; then
export noresume
unset resume
else
resume=${RESUME:-}
fi
maybe_break top
# export BOOT variable value for compcache,
# so we know if we run from casper
export BOOT
# Don't do log messages here to avoid confusing graphical boots
run_scripts /scripts/init-top
maybe_break modules
[ "$quiet" != "y" ] && log_begin_msg "Loading essential drivers"
load_modules
[ "$quiet" != "y" ] && log_end_msg
[ -n "${netconsole}" ] && modprobe netconsole netconsole="${netconsole}"
maybe_break premount
[ "$quiet" != "y" ] && log_begin_msg "Running /scripts/init-premount"
run_scripts /scripts/init-premount
[ "$quiet" != "y" ] && log_end_msg
maybe_break mount
log_begin_msg "Mounting root file system"
. /scripts/${BOOT}
parse_numeric ${ROOT}
maybe_break mountroot
mountroot
log_end_msg
maybe_break bottom
[ "$quiet" != "y" ] && log_begin_msg "Running /scripts/init-bottom"
run_scripts /scripts/init-bottom
[ "$quiet" != "y" ] && log_end_msg
# Preserve information on old systems without /run on the rootfs
if [ -d ${rootmnt}/run ]; then
mount -n -o move /run ${rootmnt}/run
else
# The initramfs udev database must be migrated:
if [ -d /run/udev ] && [ ! -d /dev/.udev ]; then
mv /run/udev /dev/.udev
fi
# The initramfs debug info must be migrated:
if [ -d /run/initramfs ] && [ ! -d /dev/.initramfs ]; then
mv /run/initramfs /dev/.initramfs
fi
umount /run
fi
# Move virtual filesystems over to the real filesystem
mount -n -o move /sys ${rootmnt}/sys
mount -n -o move /proc ${rootmnt}/proc
validate_init() {
checktarget="${1}"
# Work around absolute symlinks
if [ -d "${rootmnt}" ] && [ -h "${rootmnt}${checktarget}" ]; then
case $(readlink "${rootmnt}${checktarget}") in /*)
checktarget="$(chroot ${rootmnt} readlink ${checktarget})"
;;
esac
fi
# Make sure the specified init can be executed
if [ ! -x "${rootmnt}${checktarget}" ]; then
return 1
fi
# Upstart uses /etc/init as configuration directory :-/
if [ -d "${rootmnt}${checktarget}" ]; then
return 1
fi
}
# Check init bootarg
if [ -n "${init}" ]; then
if ! validate_init "$init"; then
echo "Target filesystem doesn't have requested ${init}."
init=
fi
fi
# Common case: /sbin/init is present
if [ ! -x "${rootmnt}/sbin/init" ]; then
# ... if it's not available search for valid init
if [ -z "${init}" ] ; then
for inittest in /sbin/init /etc/init /bin/init /bin/sh; do
if validate_init "${inittest}"; then
init="$inittest"
break
fi
done
fi
# No init on rootmount
if ! validate_init "${init}" ; then
panic "NNo init found. Try passing init= bootarg." #这里多了一个N,自己加的。
fi
fi
maybe_break init
# don't leak too much of env - some init(8) don't clear it
# (keep init, rootmnt)
unset debug
unset MODPROBE_OPTIONS
unset DPKG_ARCH
unset ROOTFLAGS
unset ROOTFSTYPE
unset ROOTDELAY
unset ROOT
unset IP
unset BOOT
unset BOOTIF
unset UBIMTD
unset blacklist
unset break
unset noresume
unset panic
unset quiet
unset readonly
unset resume
unset resume_offset
# Chain to real filesystem
exec run-init ${rootmnt} ${init} "$@" ${recovery:+--startup-event=recovery} <${rootmnt}/dev/console >${rootmnt}/dev/console 2>&1
panic "Could not execute run-init."
1 0
- initramfs对应的init脚本文件,解压后可见
- initramfs中init调用的udev脚本对应的dmesg输出
- initramfs:/init
- initramfs.img,ramdisk 文件解压与压缩
- android中 解压对应的zip文件 到指定文件
- C# 上传RAR文件 解压 获取解压后的文件名称
- 使用gen_initramfs_list.sh脚本轻松创建cpio格式的initramfs文件
- 解压RK3288的boot.img修改init.rc 添加开机自启动脚本
- SUSE 与 RedHat init.d 脚本文件的区别
- Linux shell脚本以单文件解压的形式解压多个文件
- opencore音频输出文件编译后对应的so文件
- magento 在打包然后解压后的文件的丢失
- Python读取某个目录下的zip压缩包解压开后计算每个小文件的md5值,并将压缩包名字、里面小文件名字、以及对应的md5值写入csv文件
- 解压vmlinuz和解压initrd(initramfs)
- 解压vmlinuz和解压initrd(initramfs)
- ubuntu下rar文件解压后文件名乱码的解决方案
- ubuntu下rar文件解压后文件名乱码的解决方法
- ubuntu下rar文件解压后文件名乱码的解决方法
- UVa #11134 Fabled Rooks (例题8-4)
- 改进的筛素数法
- Linux下查看内存使用情况方法总结
- 对网站网页进行相关的优化,提高在搜索引擎上的排名
- C# Managed DirectX中的Device类
- initramfs对应的init脚本文件,解压后可见
- Python学习:自定义对象
- 排序二叉树的中序遍历
- POJ 2774 Long Long Message && URAL 1517. Freedom of Choice(求最长重复子序列)
- memmove实现
- numpy数组拼接方法介绍
- 位操作基础篇之位操作全面总结
- JSON进阶第二篇 AJAX方式传递JSON数据
- Linux下截图工具 -- scrot