Getting in Line

Computer networking requires that the computers in the network be linked.

This problem considers a ``linear" network in which the computers are chained together so that each is connected to exactly two others except for the two computers on the ends of the chain which are connected to only one other computer. A picture is shown below. Here the computers are the black dots and their locations in the network are identified by planar coordinates (relative to a coordinate system not shown in the picture).

Distances between linked computers in the network are shown in feet.

For various reasons it is desirable to minimize the length of cable used.

Your problem is to determine how the computers should be connected into such a chain to minimize the total amount of cable needed. In the installation being constructed, the cabling will run beneath the floor, so the amount of cable used to join 2 adjacent computers on the network will be equal to the distance between the computers plus 16 additional feet of cable to connect from the floor to the computers and provide some slack for ease of installation.

The picture below shows the optimal way of connecting the computers shown above, and the total length of cable required for this configuration is (4+16)+ (5+16) + (5.83+16) + (11.18+16) = 90.01 feet.

Input

The input file will consist of a series of data sets. Each data set will begin with a line consisting of a single number indicating the number of computers in a network. Each network has at least 2 and at most 8 computers. A value of 0 for the number of computers indicates the end of input.

After the initial line in a data set specifying the number of computers in a network, each additional line in the data set will give the coordinates of a computer in the network. These coordinates will be integers in the range 0 to 150. No two computers are at identical locations and each computer will be listed once.

Output

The output for each network should include a line which tells the number of the network (as determined by its position in the input data), and one line for each length of cable to be cut to connect each adjacent pair of computers in the network. The final line should be a sentence indicating the total amount of cable used.

In listing the lengths of cable to be cut, traverse the network from one end to the other. (It makes no difference at which end you start.) Use a format similar to the one shown in the sample output, with a line of asterisks separating output for different networks and with distances in feet printed to 2 decimal places.

Sample Input

65 1955 2838 10128 62111 8443 116511 2784 99142 8188 3095 383132 7349 8672 1110

Sample Output

**********************************************************Network #1Cable requirement to connect (5,19) to (55,28) is 66.80 feet.Cable requirement to connect (55,28) to (28,62) is 59.42 feet.Cable requirement to connect (28,62) to (38,101) is 56.26 feet.Cable requirement to connect (38,101) to (43,116) is 31.81 feet.Cable requirement to connect (43,116) to (111,84) is 91.15 feet.Number of feet of cable required is 305.45.**********************************************************Network #2Cable requirement to connect (11,27) to (88,30) is 93.06 feet.Cable requirement to connect (88,30) to (95,38) is 26.63 feet.Cable requirement to connect (95,38) to (84,99) is 77.98 feet.Cable requirement to connect (84,99) to (142,81) is 76.73 feet.Number of feet of cable required is 274.40.**********************************************************Network #3Cable requirement to connect (132,73) to (72,111) is 87.02 feet.Cable requirement to connect (72,111) to (49,86) is 49.97 feet.Number of feet of cable required is 136.99.

题目大义：找出电脑连线之间最短的方案

做法：因为最多只有八台电脑，所以直接暴力做就好，但要列举所有情况一开始不知道怎么做，后来想起next_permutation这个全排列函数，将下标储存并进行排列，下次输出这么多格式的还是用printf比较方便。

#include <bits/stdc++.h>#include <cmath> #include <cstdio>using namespace std;struct point{double x,y;};point c[100];int d[100];int e[100];double dis(point a,point b){return sqrt((a.x-b.x)*(a.x-b.x)+(a.y-b.y)*(a.y-b.y))+16;}int main(){int n;int num=1;while(cin >> n){if(n==0) break;for(int i=0 ; i < n; ++i){cin >> c[i].x >> c[i].y;d[i]=i;}double min=100000000000000000;do{double ans=0;for(int i=0 ; i < n-1; ++i){ans+=dis(c[d[i]],c[d[i+1]]);}if(min > ans){min=ans;for(int i=0; i < n; ++i) e[i]=d[i];}}while(next_permutation(d,d+n));cout << "**********************************************************" << endl;cout << "Network #" << num << endl;for(int i=0; i < n-1; ++i){cout << "Cable requirement to connect (" << c[e[i]].x  << "," << c[e[i]].y << ") to (" << c[e[i+1]].x << "," << c[e[i+1]].y << ") is ";printf("%.2lf feet.\n",dis(c[e[i]],c[e[i+1]]));}printf("Number of feet of cable required is %.2lf.\n",min);num++;}}