Android API之android.provider.ContactsContract.RawContacts
来源:互联网 发布:小学生拼音软件下载 编辑:程序博客网 时间:2024/06/03 03:48
android.provider.ContactsContract.RawContacts
Constants for the raw contacts table, which contains one row of contact information for each person in each synced account. Sync adapters and contact management apps are the primary consumers of this API.
Aggregation
As soon as a raw contact is inserted or whenever its constituent data changes, the provider will check if the raw contact matches other existing raw contacts and if so will aggregate it with those. The aggregation is reflected in the RawContacts
table by the change of the CONTACT_ID
field, which is the reference to the aggregate contact.
Changes to the structured name, organization, phone number, email address, or nickname trigger a re-aggregation.
See also AggregationExceptions
for a mechanism to control aggregation programmatically.
Operations
- Insert
Raw contacts can be inserted incrementally or in a batch. The incremental method is more traditional but less efficient. It should be used only if no
Data
values are available at the time the raw contact is created:ContentValues values = new ContentValues(); values.put(RawContacts.ACCOUNT_TYPE, accountType); values.put(RawContacts.ACCOUNT_NAME, accountName); Uri rawContactUri = getContentResolver().insert(RawContacts.CONTENT_URI, values); long rawContactId = ContentUris.parseId(rawContactUri);
Once
Data
values become available, insert those. For example, here's how you would insert a name:values.clear(); values.put(Data.RAW_CONTACT_ID, rawContactId); values.put(Data.MIMETYPE, StructuredName.CONTENT_ITEM_TYPE); values.put(StructuredName.DISPLAY_NAME, "Mike Sullivan"); getContentResolver().insert(Data.CONTENT_URI, values);
The batch method is by far preferred. It inserts the raw contact and its constituent data rows in a single database transaction and causes at most one aggregation pass.
ArrayList<ContentProviderOperation> ops = Lists.newArrayList(); ... int rawContactInsertIndex = ops.size(); ops.add(ContentProviderOperation.newInsert(RawContacts.CONTENT_URI) .withValue(RawContacts.ACCOUNT_TYPE, accountType) .withValue(RawContacts.ACCOUNT_NAME, accountName) .build()); ops.add(ContentProviderOperation.newInsert(Data.CONTENT_URI) .withValueBackReference(Data.RAW_CONTACT_ID, rawContactInsertIndex) .withValue(Data.MIMETYPE, StructuredName.CONTENT_ITEM_TYPE) .withValue(StructuredName.DISPLAY_NAME, "Mike Sullivan") .build()); getContentResolver().applyBatch(ContactsContract.AUTHORITY, ops);
Note the use of
ContentProviderOperation.Builder.withValueBackReference(String, int)
to refer to the as-yet-unknown index value of the raw contact inserted in the first operation.- Update
Raw contacts can be updated incrementally or in a batch. Batch mode should be used whenever possible. The procedures and considerations are analogous to those documented above for inserts.
- Delete
When a raw contact is deleted, all of its Data rows as well as StatusUpdates, AggregationExceptions, PhoneLookup rows are deleted automatically. When all raw contacts associated with a
Contacts
row are deleted, theContacts
row itself is also deleted automatically.The invocation of
resolver.delete(...)
, does not immediately delete a raw contacts row. Instead, it sets theDELETED
flag on the raw contact and removes the raw contact from its aggregate contact. The sync adapter then deletes the raw contact from the server and finalizes phone-side deletion by callingresolver.delete(...)
again and passing theContactsContract.CALLER_IS_SYNCADAPTER
query parameter.Some sync adapters are read-only, meaning that they only sync server-side changes to the phone, but not the reverse. If one of those raw contacts is marked for deletion, it will remain on the phone. However it will be effectively invisible, because it will not be part of any aggregate contact.
- Query
It is easy to find all raw contacts in a Contact:
Cursor c = getContentResolver().query(RawContacts.CONTENT_URI, new String[]{RawContacts._ID}, RawContacts.CONTACT_ID + "=?", new String[]{String.valueOf(contactId)}, null);
To find raw contacts within a specific account, you can either put the account name and type in the selection or pass them as query parameters. The latter approach is preferable, especially when you can reuse the URI:
Uri rawContactUri = RawContacts.URI.buildUpon() .appendQueryParameter(RawContacts.ACCOUNT_NAME, accountName) .appendQueryParameter(RawContacts.ACCOUNT_TYPE, accountType) .build(); Cursor c1 = getContentResolver().query(rawContactUri, RawContacts.STARRED + "<>0", null, null, null); ... Cursor c2 = getContentResolver().query(rawContactUri, RawContacts.DELETED + "<>0", null, null, null);
The best way to read a raw contact along with all the data associated with it is by using the
Entity
directory. If the raw contact has data rows, the Entity cursor will contain a row for each data row. If the raw contact has no data rows, the cursor will still contain one row with the raw contact-level information.Uri rawContactUri = ContentUris.withAppendedId(RawContacts.CONTENT_URI, rawContactId); Uri entityUri = Uri.withAppendedPath(rawContactUri, Entity.CONTENT_DIRECTORY); Cursor c = getContentResolver().query(entityUri, new String[]{RawContacts.SOURCE_ID, Entity.DATA_ID, Entity.MIMETYPE, Entity.DATA1}, null, null, null); try { while (c.moveToNext()) { String sourceId = c.getString(0); if (!c.isNull(1)) { String mimeType = c.getString(2); String data = c.getString(3); ... } } } finally { c.close(); }
Columns
RawContacts
类型
字段名字
读写权限
备注
long
_ID
只读
Row ID. Sync adapters should try to preserve row IDs during updates. In other words, it is much better for a sync adapter to update a raw contact rather than to delete and re-insert it.
long
CONTACT_ID
只读
The ID of the row in the ContactsContract.Contacts
table that this raw contact belongs to. Raw contacts are linked to contacts by the aggregation process, which can be controlled by the AGGREGATION_MODE
field and AggregationExceptions
.
int
AGGERATION_MODE
可读/可写
A mechanism that allows programmatic control of the aggregation process. The allowed values areAGGREGATION_MODE_DEFAULT
, AGGREGATION_MODE_DISABLED
andAGGREGATION_MODE_SUSPENDED
. See also AggregationExceptions
.
int
DELETED
可读/可写
The "deleted" flag: "0" by default, "1" if the row has been marked for deletion. Whenandroid.content.ContentResolver.delete
is called on a raw contact, it is marked for deletion and removed from its aggregate contact. The sync adaptor deletes the raw contact on the server and then calls ContactResolver.delete once more, this time passing theContactsContract.CALLER_IS_SYNCADAPTER
query parameter to finalize the data removal.
int
TIMES_CONTACTED
可读/可写
The number of times the contact has been contacted. To have an effect on the corresponding value of the aggregate contact, this field should be set at the time the raw contact is inserted. After that, this value is typically updated viaContactsContract.Contacts.markAsContacted
.
long
LAST_TIME_CONTACTED
可读/可写
The timestamp of the last time the contact was contacted. To have an effect on the corresponding value of the aggregate contact, this field should be set at the time the raw contact is inserted. After that, this value is typically updated via ContactsContract.Contacts.markAsContacted
.
int
STARRED
可读/可写
An indicator for favorite contacts: '1' if favorite, '0' otherwise. Changing this field immediately affects the corresponding aggregate contact: if any raw contacts in that aggregate contact are starred, then the contact itself is marked as starred.
String
CUSTOM_RINGTONE
可读/可写
A custom ringtone associated with a raw contact. Typically this is the URI returned by an activity launched with theandroid.media.RingtoneManager.ACTION_RINGTONE_PICKER
intent. To have an effect on the corresponding value of the aggregate contact, this field should be set at the time the raw contact is inserted. To set a custom ringtone on a contact, use the field Contacts.CUSTOM_RINGTONE
instead.int
SEND_TO_VOICEMAIL
可读/可写
An indicator of whether calls from this raw contact should be forwarded directly to voice mail ('1') or not ('0'). To have an effect on the corresponding value of the aggregate contact, this field should be set at the time the raw contact is inserted.String
ACCOUNT_NAME
可读/写一次
The name of the account instance to which this row belongs, which when paired withACCOUNT_TYPE
identifies a specific account. For example, this will be the Gmail address if it is a Google account. It should be set at the time the raw contact is inserted and never changed afterwards.String
ACCOUNT_TYPE
可读/写一次
The type of account to which this row belongs, which when paired with ACCOUNT_NAME
identifies a specific account. It should be set at the time the raw contact is inserted and never changed afterwards.
To ensure uniqueness, new account types should be chosen according to the Java package naming convention. Thus a Google account is of type "com.google".
String
SOURCE_ID
可读/可写
String that uniquely identifies this row to its source account. Typically it is set at the time the raw contact is inserted and never changed afterwards. The one notable exception is a new raw contact: it will have an account name and type, but no source id. This indicates to the sync adapter that a new contact needs to be created server-side and its ID stored in the corresponding SOURCE_ID field on the phone.int
VERSION
只读
Version number that is updated whenever this row or its related data changes. This field can be used for optimistic locking of a raw contact.int
DIRTY
可读/可写
Flag indicating thatVERSION
has changed, and this row needs to be synchronized by its owning account. The value is set to "1" automatically whenever the raw contact changes, unless the URI has the ContactsContract.CALLER_IS_SYNCADAPTER
query parameter specified. The sync adapter should always supply this query parameter to prevent unnecessary synchronization: user changes some data on the server, the sync adapter updates the contact on the phone (without the CALLER_IS_SYNCADAPTER flag) flag, which sets the DIRTY flag, which triggers a sync to bring the changes to the server.String
SYNC1
可读/可写
Generic column provided for arbitrary use by sync adapters. The content provider stores this information on behalf of the sync adapter but does not interpret it in any way.String
SYNC2
可读/可写
Generic column for use by sync adapters.String
SYNC3
可读/可写
Generic column for use by sync adapters.String
SYNC4
可读/可写
Generic column for use by sync adapters.- Android API之android.provider.ContactsContract.RawContacts
- Android API之android.provider.ContactsContract.Contacts
- Android API之android.provider.ContactsContract.Contacts
- Android API之android.provider.ContactsContract
- Android API之android.provider.ContactsContract.Data
- import android.provider.ContactsContract 出错
- android.provider.ContactsContract.Contacts表中所有字段之详解
- android.provider.ContactsContract.Contacts表中所有字段之详解
- The import android provider.ContactsContract cannot be resolved
- Android 2.0以后的Contacts API--ContactsContract
- Android 2.0以后的Contacts API--ContactsContract
- Android 2.0以后的Contacts API--ContactsContract
- Android 2.0以后的Contacts API--ContactsContract
- Android 2.0以后的Contacts API--ContactsContract
- ContactsContract.Data ContactsContract.Contacts.Data ContactsContract.RawContacts.Data 关系
- 】PhoneLookup.NUMBER----ContactsContract类Android 2.0 API改变
- PhoneLookup.NUMBER----ContactsContract类Android 2.0 API改变
- Android API Guides---Calendar Provider
- ASP.NET Identity 2.0 Change Primary Key from String to Integer
- 全关联优化
- JSP内置对象(一)——request对象
- Eclipse执行java代码,获取系统时间少了8个小时,解决办法
- 基本数据类型包装类的简单介绍及进制转换
- Android API之android.provider.ContactsContract.RawContacts
- Mysql 报错:master and slave have equal MySQL server UUIDs
- POJ-1251 Jungle Roads(最小生成树)
- 开门大吉
- stl--------deque
- CentOS下安装JDK1.7
- 判断ListView的每一个item高度
- 揭开计算机的神秘面纱
- 微信公众平台企业号回调模式的URL验证--jdk6、jdk7加密问题