Ubuntu 64位系统xampp环境编译32位php扩展库
来源:互联网 发布:空间怎么绑定域名 编辑:程序博客网 时间:2024/04/27 17:10
由于项目需要,需要php调用c语言的库,由于环境系统是64位,但是php却是32位,因此需要编译出32位的库,本文在之前的文章Ubuntu 下php调用c语言.so文件基础上修改完成。
首先写一个php模块(php extension),在php中调用该模块内的函数,再通过该模块来调用so中的函数。
首先做一个简单的so文件:
/**
* hello.c
* To compile, use following commands:
* gcc -O -c -fPIC -o hello.o hello.c -m32
* gcc -shared -o libhello.so hello.o -m32
*/
inthello_add(
inta,
intb)
{
return
a + b;
}
然后将它编译成.so文件并放到系统中:
$gcc -
O-c -fPIC -o hello.o hello.c -m32
$ gcc -shared -o libhello.so hello.o -m32
$ su
# echo /usr/local/lib > /etc/ld.so.conf.d/local.conf
# cp libhello.so /usr/local/lib
# /sbin/ldconfig
写段小程序来验证其正确性:
/**
* hellotest.c
* To compile, use following commands:
* gcc -o hellotest -lhello hellotest.c -m32
*/
#include <stdio.h>
int main()
{
int
a =
3, b =
4;
printf(
"%d + %d = %d\n", a, b, hello_add(a,b));
return0
;
}
编译并执行:
$ gcc -o hellotest -lhello hellotest.c -m32
$ ./hellotest
3+
4=
7
经测试。在Ubuntu12.04上无法通过编译,但在Ubuntu14.10上可以编译,在Centos下正常编译,见下图,但是不影响后面的使用
下面我们制作PHP模块。由于基于xampp,所以php5-dev不装,直接使用/opt/lampp/bin目录下的命令即可。
然后下载php源代码。我使用的是php-5.2.3.tar.gz,解压缩。
$ wget http://eduunix.ccut.edu.cn/index2/php/php/php-5.3.6.tar.gz
$tar xzvf php-
5.3.6.tar.gz
$cd php-
5.3.6/ext
然后通过下面的命令建立一个名为 hello的模块。
$ ./ext_skel --extname=hello
执行该命令之后它会提示你应当用什么命令来编译模块,可惜那是将模块集成到php内部的编译方法。如果要编译成可动态加载的 php_hello.so,方法要更为简单。
$
cdhello
首先编辑 config.m4 文件,去掉第16行和第18行的注释(注释符号为 dnl)
16:
PHP_ARG_ENABLE(hello, whether to enable hello support,
17:
dnl Make sure that the comment is aligned:
18:
[ --enable-hello Enable hello support])
然后执行 phpize5 程序,生成configure脚本:
$ /opt/lampp/bin/phpize
然后打开 php_hello.h,在 PHP_FUNCTION(confirm_hello_compiled);
之下加入函数声明:
PHP_FUNCTION(confirm_hello_compiled);
/* For testing, remove later. */
PHP_FUNCTION(hello_add);
打开 hello.c,在 PHP_FE(confirm_hello_compiled, NULL)
下方加入以下内容。
zend_function_entry hello_functions[] = {
PHP_FE(confirm_hello_compiled,
NULL)
/* For testing, remove later. */
PHP_FE(hello_add,
NULL)
/* For testing, remove later. */
{
NULL,
NULL,
NULL}
/* Must be the last line in hello_functions[] */
};
然后在 hello.c 的最末尾书写hello_add函数的内容:
PHP_FUNCTION(hello_add)
{
longint
a, b;
longint
result;
if
(zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC,
"ll", &a, &b) == FAILURE) {
return
;
}
result = hello_add(a, b);
RETURN_LONG(result);
}
保存退出,编译并安装:
$ CFLAGS=-m32 CPPFLAGS=-m32 CCASFLAGS=-m32 ./configure --with-php-config=/opt/lampp/bin/php-config
$make
LDFLAGS=-lhello
$ make
test (测试是否正常安装)
$sudo make install
此命令会将
so
放在
php
的扩展文件去
编辑php的配置文件加载so库
$ vim /opt/lampp/etc/php.ini
找到
extension
部分,加入
extension=hello.so
,重启
xampp
$ /opt/lampp/lampp restart
然后在 /var/www/ 下建立一个 hello.php 文件,内容如下:
<?php
echo hello_add(3, 4);
?>
然后在浏览器中打开hello.php文件,如果显示7,则说明函数调用成功了。
- Ubuntu 64位系统xampp环境编译32位php扩展库
- 在 64位Ubuntu系统上 建立32位编译环境
- ubuntu-16.04 64位系统搭建嵌入式交叉编译环境
- 64位动态php扩展库的编译
- 64位ubuntu编译32位程序
- 64位系统编译32位程序
- 64位系统下编译32位库
- Ubuntu 64位系统安装32位运行库
- 64位Ubuntu系统安装32位兼容库
- 64位Ubuntu系统安装32位兼容库
- Ubuntu系统 + VMware虚拟机+32位编译环境 安装编译Android2.3源码
- 64位系统下编译PHP找不到库文件问题
- ubuntu 64位环境
- 32位机器Ubuntu系统编译android 内核注意修改成64位
- premake 在64位Ubuntu系统下编译32位GCC程序
- 64位Centos运行32位ubuntu系统编译过后的C可执行文件
- ubuntu环境下查看系统是32位还是64位
- 64位Linux环境安装PHP TCC 扩展方法
- Java泛型详解
- C#的排列组合类
- List of file systems
- 鼠标、键盘退场,智能硬件掀起交互革命
- 判断当前是横屏还是竖屏
- Ubuntu 64位系统xampp环境编译32位php扩展库
- java swing编程四种主要布局模式的简单例子
- PHP正则表达式基础和应用
- IOS开发笔记——帮助理解NSAutoReleasePool的文章
- Oracle中查询一个表中字段(列)个数
- C Language Study - 内存分区
- java中注解的使用与实例
- Find Peak Element☆
- Hibernate中什么是懒加载异常?该怎么处理懒加载异常?