CentOS6.5软raid0创建
来源：互联网 发布：centos怎么输入中文 编辑：程序博客网 时间：2024/06/05 05:18
CentOS6.5
1.yum install -y mdadm parted
[root@mytest1 ~]# yum install mdadm parted
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
mdadm x86_64 3.2.6-7.el6_5.2 updates 337 k
parted x86_64 2.1-21.el6 base 606 k
Transaction Summary
================================================================================
2.对sdb，sdc两块磁盘分区，设置
[root@mytest1 ~]# fdisk /dev/sdc
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help): p
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c7662
Device Boot Start End Blocks Id System
/dev/sdc1 1 1305 10482381 fd Linux raid autodetect
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
3.分区同步免reboot
[root@mytest1 ~]# partprobe
Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
4.查看两块磁盘状态
[root@mytest1 ~]# fdisk -l /dev/sdb /dev/sdc
Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0af7aca1
Device Boot Start End Blocks Id System
/dev/sdb1 1 1305 10482381 fd Linux raid autodetect
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c7662
Device Boot Start End Blocks Id System
/dev/sdc1 1 1305 10482381 fd Linux raid autodetect
5.创建raid0
[root@mytest1 ~]# mdadm -C /dev/md0 -ayes -l0 -n2 /dev/sd{b,c}1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
6.查看状态
[root@mytest1 ~]# cat /proc/mdstat
Personalities : [raid0]
md0 : active raid0 sdc1[1] sdb1[0]
20964352 blocks super 1.2 512k chunks
unused devices: <none>
[root@mytest1 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sun Aug 10 14:15:50 2014
Raid Level : raid0
Array Size : 20964352 (19.99 GiB 21.47 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Sun Aug 10 14:15:50 2014
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Chunk Size : 512K
Name : mytest1:0 (local to host mytest1)
UUID : c62a98dc:7f802f31:6e4435ae:168a6829
Events : 0
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
6.创建mdadm配置文件
[root@mytest1 ~]# echo DEVICE /dev/sd{b,c}1 >> /etc/mdadm.conf
[root@mytest1 ~]# mdadm -Ds >> /etc/mdadm.conf
[root@mytest1 ~]# vi /etc/mdadm.conf
DEVICE /dev/sdb1 /dev/sdc1
ARRAY /dev/md0 level=raid0 num-devices=2 UUID=c62a98dc:7f802f31:6e4435ae:168a6829
7.创建文件系统
[root@mytest1 ~]# mkfs.ext4 /dev/md0
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=128 blocks, Stripe width=256 blocks
1310720 inodes, 5241088 blocks
262054 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
8.开机自动挂载
[root@mytest1 ~]# mkdir /raid0disk
[root@mytest1 ~]# vi /etc/fstab
#
# /etc/fstab
# Created by anaconda on Sun Aug 10 02:32:47 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_mytest1-root / ext4 defaults 1 1
UUID=af6ed5f7-9181-440e-9b49-fff643caba9d /boot ext4 defaults 1 2
/dev/mapper/vg_mytest1-tmp /tmp ext4 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/md0 /raid0disk ext4 defaults 0 0
~
~
"/etc/fstab" 16L, 816C written
9.挂载后确认
[root@mytest1 ~]# mount -a
[root@mytest1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_mytest1-root 6.8G 781M 5.7G 12% /
tmpfs 939M 0 939M 0% /dev/shm
/dev/sda1 97M 28M 64M 31% /boot
/dev/mapper/vg_mytest1-tmp 1008M 34M 924M 4% /tmp
/dev/md0 20G 172M 19G 1% /raid0disk
1.yum install -y mdadm parted
[root@mytest1 ~]# yum install mdadm parted
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
mdadm x86_64 3.2.6-7.el6_5.2 updates 337 k
parted x86_64 2.1-21.el6 base 606 k
Transaction Summary
================================================================================
2.对sdb，sdc两块磁盘分区，设置
[root@mytest1 ~]# fdisk /dev/sdc
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)
Command (m for help): p
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c7662
Device Boot Start End Blocks Id System
/dev/sdc1 1 1305 10482381 fd Linux raid autodetect
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
3.分区同步免reboot
[root@mytest1 ~]# partprobe
Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
4.查看两块磁盘状态
[root@mytest1 ~]# fdisk -l /dev/sdb /dev/sdc
Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0af7aca1
Device Boot Start End Blocks Id System
/dev/sdb1 1 1305 10482381 fd Linux raid autodetect
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c7662
Device Boot Start End Blocks Id System
/dev/sdc1 1 1305 10482381 fd Linux raid autodetect
5.创建raid0
[root@mytest1 ~]# mdadm -C /dev/md0 -ayes -l0 -n2 /dev/sd{b,c}1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
6.查看状态
[root@mytest1 ~]# cat /proc/mdstat
Personalities : [raid0]
md0 : active raid0 sdc1[1] sdb1[0]
20964352 blocks super 1.2 512k chunks
unused devices: <none>
[root@mytest1 ~]# mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sun Aug 10 14:15:50 2014
Raid Level : raid0
Array Size : 20964352 (19.99 GiB 21.47 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Sun Aug 10 14:15:50 2014
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Chunk Size : 512K
Name : mytest1:0 (local to host mytest1)
UUID : c62a98dc:7f802f31:6e4435ae:168a6829
Events : 0
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
1 8 33 1 active sync /dev/sdc1
6.创建mdadm配置文件
[root@mytest1 ~]# echo DEVICE /dev/sd{b,c}1 >> /etc/mdadm.conf
[root@mytest1 ~]# mdadm -Ds >> /etc/mdadm.conf
[root@mytest1 ~]# vi /etc/mdadm.conf
DEVICE /dev/sdb1 /dev/sdc1
ARRAY /dev/md0 level=raid0 num-devices=2 UUID=c62a98dc:7f802f31:6e4435ae:168a6829
7.创建文件系统
[root@mytest1 ~]# mkfs.ext4 /dev/md0
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=128 blocks, Stripe width=256 blocks
1310720 inodes, 5241088 blocks
262054 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
8.开机自动挂载
[root@mytest1 ~]# mkdir /raid0disk
[root@mytest1 ~]# vi /etc/fstab
#
# /etc/fstab
# Created by anaconda on Sun Aug 10 02:32:47 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg_mytest1-root / ext4 defaults 1 1
UUID=af6ed5f7-9181-440e-9b49-fff643caba9d /boot ext4 defaults 1 2
/dev/mapper/vg_mytest1-tmp /tmp ext4 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/md0 /raid0disk ext4 defaults 0 0
~
~
"/etc/fstab" 16L, 816C written
9.挂载后确认
[root@mytest1 ~]# mount -a
[root@mytest1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_mytest1-root 6.8G 781M 5.7G 12% /
tmpfs 939M 0 939M 0% /dev/shm
/dev/sda1 97M 28M 64M 31% /boot
/dev/mapper/vg_mytest1-tmp 1008M 34M 924M 4% /tmp
/dev/md0 20G 172M 19G 1% /raid0disk
0 0
- CentOS6.5软raid0创建
- 亚马逊服务器下创建raid0
- Centos6.5 创建新用户
- RHEL7磁盘加密和RAID0创建
- raid0,1,5,10介绍
- CentOS6.5创建yum源
- CentOs6.5虚拟机的创建
- linux配置软raid0过程（A）
- 对 磁盘阵列 raid0/1/5 的认识
- Raid0 Raid 1 Raid 5 的区别
- RAID磁盘阵列 及RAID0 1 3 5
- 磁盘阵列RAID0，1，10，5，6
- centos6中创建软raid方法
- CentOS6.5下一键式创建VPN服务器
- virsh 创建 centos6.4
- RAID0/1/5/6/10/50/JBOD技术详解
- RAID0/1/5/6/10/50/JBOD如何选择
- raid0/1/5/6/（1/0）/（0/1）
- HDU 4041 Eliminate Witches! (栈的模拟)
- ZOJ 3768 Continuous Login
- 教你如何在Fedora,CentOS,RHEL中检查RPM包的依赖性
- Android4.4 源码编译运行
- javascript兼容性问题一_____nextSibling问题
- CentOS6.5软raid0创建
- Zend Studio 12 安装及破解
- 用 C 语言实现 斐波那契数列
- http://www.eoeandroid.com/blog-546380-2248.html
- WebService Soap架构设计
- ResultSet用法集锦
- 应用软件新建工程可研报告-目录范例
- [LeetCode]First Missing Positive
- Ｃ＃调用软键盘
