华为CE12800接口默认配置
来源:互联网 发布:社交媒体数据 作用 编辑:程序博客网 时间:2024/05/18 10:05
interface GE7/0/0
undo shutdown
enable snmp trap updown
trap-threshold input-rate 90 resume-rate 90
trap-threshold output-rate 90 resume-rate 90
qinq protocol 8100
port link-type access
port default vlan 1
undo port discard tagged-packet
undo port bridge enable
undo mac-vlan enable
undo ip-subnet-vlan enable
undo port-isolate enable
stp enable
undo stp config-digest-snoop
undo stp no-agreement-check
undo stp loop-protection
undo stp root-protection
stp point-to-point auto
stp compliance auto
stp instance 0 port priority 128
undo bpdu bridge enable
arp detect times 3
undo arp detect mode unicast
arp detect interval 5
arp timeout 1200
arp fake timeout 5
undo arp validate source-mac destination-mac
undo dldp enable
mac-address limit maximum 0
undo mac-address learning disable
storm control interval 5
undo port-security enable
undo dhcp snooping enable
undo dhcp snooping trusted
dhcp snooping user-bind max-number 32768
undo dhcp option82 insert enable
undo dhcp option82 rebuild enable
dhcp option82 format default
undo lldp disable
lldp admin-status txrx
undo lldp tlv-disable basic-tlv all
undo lldp tlv-disable dot1-tlv port-vlan-id
undo lldp tlv-disable dot1-tlv protocol-vlan-id
undo lldp tlv-disable dot1-tlv vlan-name
undo lldp tlv-enable dot1-tlv protocol-identity
undo lldp tlv-disable dot3-tlv all
undo rmon-statistics
undo smart-link flush receive
undo topology notify vlan
undo dhcpv6 interface-id insert enable
undo dhcpv6 remote-id insert enable
port priority 0
qos pq 0 to 7
undo negotiation disable
undo training disable
undo port mode fast-up
undo speed
undo speed auto
ifg 12
undo port crc-statistics trigger error-down
undo port transceiver-power-low trigger error-down
port link-flap interval 10
port link-flap threshold 5
undo flow-control
jumboframe enable 9216
undo loopback internal
undo set flow-statistics include-interframe
trap-threshold crc-statistics 3 interval 10
carrier down-hold-time 0
carrier up-hold-time 0
port mode lan
undo als enable
als restart mode automatic
als restart pulse interval 100
als restart pulse width 2
undo transceiver non-certified-alarm disable
undo single-fiber enable
undo shutdown transmit
undo shutdown receive
undo shutdown
enable snmp trap updown
trap-threshold input-rate 90 resume-rate 90
trap-threshold output-rate 90 resume-rate 90
qinq protocol 8100
port link-type access
port default vlan 1
undo port discard tagged-packet
undo port bridge enable
undo mac-vlan enable
undo ip-subnet-vlan enable
undo port-isolate enable
stp enable
undo stp config-digest-snoop
undo stp no-agreement-check
undo stp loop-protection
undo stp root-protection
stp point-to-point auto
stp compliance auto
stp instance 0 port priority 128
undo bpdu bridge enable
arp detect times 3
undo arp detect mode unicast
arp detect interval 5
arp timeout 1200
arp fake timeout 5
undo arp validate source-mac destination-mac
undo dldp enable
mac-address limit maximum 0
undo mac-address learning disable
storm control interval 5
undo port-security enable
undo dhcp snooping enable
undo dhcp snooping trusted
dhcp snooping user-bind max-number 32768
undo dhcp option82 insert enable
undo dhcp option82 rebuild enable
dhcp option82 format default
undo lldp disable
lldp admin-status txrx
undo lldp tlv-disable basic-tlv all
undo lldp tlv-disable dot1-tlv port-vlan-id
undo lldp tlv-disable dot1-tlv protocol-vlan-id
undo lldp tlv-disable dot1-tlv vlan-name
undo lldp tlv-enable dot1-tlv protocol-identity
undo lldp tlv-disable dot3-tlv all
undo rmon-statistics
undo smart-link flush receive
undo topology notify vlan
undo dhcpv6 interface-id insert enable
undo dhcpv6 remote-id insert enable
port priority 0
qos pq 0 to 7
undo negotiation disable
undo training disable
undo port mode fast-up
undo speed
undo speed auto
ifg 12
undo port crc-statistics trigger error-down
undo port transceiver-power-low trigger error-down
port link-flap interval 10
port link-flap threshold 5
undo flow-control
jumboframe enable 9216
undo loopback internal
undo set flow-statistics include-interframe
trap-threshold crc-statistics 3 interval 10
carrier down-hold-time 0
carrier up-hold-time 0
port mode lan
undo als enable
als restart mode automatic
als restart pulse interval 100
als restart pulse width 2
undo transceiver non-certified-alarm disable
undo single-fiber enable
undo shutdown transmit
undo shutdown receive
0 0
- 华为CE12800接口默认配置
- 华为CE12800系列交换机 - 熟悉命令行(1)
- 华为设备接口备份配置
- 华为静态、默认、备用路由配置
- Struts的Action接口--(4)配置默认的Action
- 华为C8815 默认logcat信息
- 接口默认声明
- 接口及默认实现
- java8接口默认方法
- Java8 接口默认方法
- 接口默认方法冲突
- 接口的默认方法
- 华为PTN910时钟接口指标
- 华为L2TP配置
- 华为路由器GRE配置
- 华为路由器简单配置
- 华为路由器配置方法
- 华为路由器典型配置
- Linux内核Socket CAN中文文档
- 最小的k个数
- 访问类的私有变量的两种方式
- java总结之克隆
- 第六周阅读程序五
- 华为CE12800接口默认配置
- 气象数据获取
- CheckBox点击lable文字选中
- 下载JDK历史版本,遇到url无法获取。
- fdisk扩容原分区容量大小
- 毕福剑风波
- 最新版SDWebImage的使用
- 第五周项目三之多文件组织
- SSH整合异常