s5pv210的引脚端口汇总
来源:互联网 发布:bgm什么意思网络用语 编辑:程序博客网 时间:2024/05/21 10:40
一.s5pv210一共有237的复用引脚(34组通用端口),142个内存引脚(两组内存端口)
S5PV210 includes 237 multi-functional input/ output port pins and 142 memory port pins. There are 34 general port groups and 2 memory port groups as listed below:
• GPA0: 8 in/out port - 2xUART with flow control
• GPA1: 4 in/out port - 2xUART without flow control or 1xUART with flow control
• GPB: 8 in/out port - 2x SPI
• GPC0: 5 in/out port - I2S, PCM, AC97
• GPC1: 5 in/out port - I2S, SPDIF, LCD_FRM
• GPD0: 4 in/out port - PWM
• GPD1: 6 in/out port - 3xI2C, PWM, IEM
• GPE0,1: 13 in/out port - Camera I/F
• GPF0,1,2,3: 30 in/out port - LCD I/F
• GPG0,1,2,3: 28 in/out port - 4xMMC channel (Channel 0 and 2 support 4-bit and 8-bit mode, but channel 1, and channel 3 support only 4-bit mode)
• GPH0,1,2,3: 32 in/out port - Key pad, External Wake-up (up-to 32-bit). (GPH* groups are in Alive region)
• GPI: 7 port- Low Power I2S, PCM (in/out port is not used), PDN configuration for power down is controlled by AUDIO_SS PDN Register.
• GPJ0,1,2,3,4: 35 in/out port - Modem IF, CAMIF, CFCON, KEYPAD, SROM ADDR[22:16]
• MP0_1,2,3: 20 in/out port - Control signals of EBI (SROM, NF, OneNAND)
• MP0_4,5,6,7: 32 in/out memory port - EBI (For more information about EBI configuration, refer to Chapter 5, and 6)
• MP1_0~8: 71 DRAM1 ports (in/out port is not used)
• MP2_0~8: 71 DRAM2 ports (in/out port is not used)
• ETC0, ETC1, ETC2, ETC4: 28 in/out ETC ports - JTAG, Operating Mode, RESET, CLOCK (ETC3 is reserved)【这几个引脚不属于复用引脚也不属于内存引脚】
二.GPA0,GPA1这两个端口共12个引脚,串口的输入输出
• GPA0: 8 in/out port - 2xUART with flow control
• GPA1: 4 in/out port - 2xUART without flow control or 1xUART with flow control
三.GPB这个端口一共八个引脚,spi接口的输入输出
• GPB: 8 in/out port - 2x SPI
四.GPC0,GPC1一共10个引脚,音频I2S输出输入,脉冲编码调制(Pulse Code Modulation,PCM),AC97声卡,数字音频接口(SPDIF)
• GPC0: 5 in/out port - I2S, PCM, AC97
• GPC1: 5 in/out port - I2S, SPDIF, LCD_FRM
五.GPD0,GPD1一共10个引脚
• GPD0: 4 in/out port - PWM
• GPD1: 6 in/out port - 3xI2C, PWM, IEM
六.GPE0,1共13个引脚 摄像头的相关引脚
• GPE0,1: 13 in/out port - Camera I/F
七.GPF0,1,2,3一共30个引脚
• GPF0,1,2,3: 30 in/out port - LCD I/F
八GPG0,1,2,3共28个引脚 MMC卡(Multimedia Card)多媒体卡
• GPG0,1,2,3: 28 in/out port - 4xMMC
九GPH0,1,2,3共32个引脚 Key pad(键盘)
• GPH0,1,2,3: 32 in/out port - Key pad, External Wake-up (up-to 32-bit).
十.GPI一共7个·引脚
GPI: 7 port- Low Power I2S, PCM
十一.GPJ0,1,2,3,4一共35个引脚
• GPJ0,1,2,3,4: 35 in/out port - Modem IF, CAMIF, CFCON, KEYPAD, SROM ADDR[22:16]
十二.MP0_1,2,3一共20个引脚
• MP0_1,2,3: 20 in/out port - Control signals of EBI (SROM, NF, OneNAND)
• MP0_4,5,6,7: 32 in/out memory port - EBI (For more information about EBI configuration, refer to Chapter 5, and 6)
十三.内存端口
• MP1_0~8: 71 DRAM1 ports (in/out port is not used)
• MP2_0~8: 71 DRAM2 ports (in/out port is not used)
十四.其他引脚
技术手册(S5PV210_UM_REV1.1)--------p63页
- s5pv210的引脚端口汇总
- 端口和引脚的区别
- s5pv210 中配置gpio为中断引脚。
- 单片机引脚与端口操作
- avr的一些宏定义,可以类似51单片机那样按位对端口引脚操作
- Linux系统下PORT端口引脚导出GPIO对应的序号关系
- 端口汇总
- 51单片机读端口与读引脚
- STM32 JTAG的引脚用作GPIO引脚
- AD590的引脚使用
- LCD1602的引脚定义
- 串口引脚的标识
- STM32引脚的知识
- 电路引脚的极性
- SPI引脚的配置
- LPC2138的引脚组态
- SN75176的引脚功能
- 引脚
- 拼音库创建 php
- 黑马程序员——Foundation基础篇
- CentOS Yum 命令详解
- div垂直居中的N种方法
- .net不能调试,mvc不能调试的解决办法。
- s5pv210的引脚端口汇总
- json对象之间的转换
- 启动eclipse的tomcat,访问tomcat出现404
- HTML5中的本地、WebSql、离线应用存储
- 使用eclipse中的maven搭建java ee项目
- LeetCode - Maxmimum Gap
- Android 回调方法使用
- 集合代数
- Lucene入门(一)