RT5350 HLK-RM04模块配置OpenWRT

来源：互联网发布：好听的淘宝优惠群取名编辑：程序博客网时间：2024/05/16 08:03

0. 安装依赖软件包

#sudo apt-get install subversion#sudo apt-get install git-core#sudo apt-get install gcc g++ binutils patch bzip2 flex bison make autoconf #sudo apt-get install gettext texinfo unzip sharutils  subversi-dev ncurses-term zlib1g-dev

1. 通过git 同步代码

#git clone git://git.openwrt.org/openwrt.git#git checkout

2. 更新安装软件包

#./scripts/feeds update -a     更新软件包#./scripts/feeds install -a    安装软件包

3. 配置

#make menuconfigTarget System (Ralink RT288x/RT3xxx)  --->(X) Ralink RT288x/RT3xxxSubtarget (RT3x5x/RT5350 based boards)  --->(X) RT3x5x/RT5350 based boardsTarget Profile (HILINK HLK-RM04)  --->(X) HILINK HLK-RM04Target Images  --->[*] squashfs

修改内核命令行 rootfstype=squashfs,jffs2 mem=16M

#make kernel_menuconfigKernel hacking  --->[*] Built-in kernel command line                                                                        (rootfstype=squashfs,jffs2 mem=16M) Default kernel command string

4. 编译

#make V=s

5. 安装tftpd

#sudo apt-get install tftpd-hpa tftp-hpa

6. 升级HLK-RM04的u-boot

连接HLK-RM04 WIRI，设置PC的ip地址为192.168.16.100

连接上HLK-RM04 LAN口

浏览器访问http://192.168.16.254/adm/hlk_update_www_hlktech_com.asp

在Update Bootloader选中uboot128.img文件升级uboot

uboot128.img 用于16MByte RAM

uboot256.img 用于32Mbyte RAM

7. 下载固件

#pushd /homt/eric/workspace/openwrt/bin/ramips#sudo cp enwrt-ramips-rt305x-hlk-rm04-squashfs-sysupgrade.bin /var/lib/tftpboot/image/

HLK-RM04控制台：

直接烧入FLASH：重启，按2 进入uboot 的Flash烧写

进入u-boot 命令行，下载固件到RAM运行：重启，按4进入u-boot命令行模式

set ipaddr=192.168.1.222set serverip=192.168.1.202tftp 8A100000 image.bin

0 0