FFmpeg与libx264接口源代码简单分析
来源：互联网 发布：淘宝聚划算是什么意思 编辑：程序博客网 时间：2024/05/16 16:15
=====================================================
H.264源代码分析文章列表：
【编码 - x264】
x264源代码简单分析：概述
x264源代码简单分析：x264命令行工具（x264.exe）
x264源代码简单分析：编码器主干部分-1
x264源代码简单分析：编码器主干部分-2
x264源代码简单分析：x264_slice_write()
x264源代码简单分析：滤波（Filter）部分
x264源代码简单分析：宏块分析（Analysis）部分-帧内宏块（Intra）
x264源代码简单分析：宏块分析（Analysis）部分-帧间宏块（Inter）
x264源代码简单分析：宏块编码（Encode）部分
x264源代码简单分析：熵编码（Entropy Encoding）部分
FFmpeg与libx264接口源代码简单分析
【解码 - libavcodec H.264 解码器】
FFmpeg的H.264解码器源代码简单分析：概述
FFmpeg的H.264解码器源代码简单分析：解析器（Parser）部分
FFmpeg的H.264解码器源代码简单分析：解码器主干部分
FFmpeg的H.264解码器源代码简单分析：熵解码（EntropyDecoding）部分
FFmpeg的H.264解码器源代码简单分析：宏块解码（Decode）部分-帧内宏块（Intra）
FFmpeg的H.264解码器源代码简单分析：宏块解码（Decode）部分-帧间宏块（Inter）
FFmpeg的H.264解码器源代码简单分析：环路滤波（Loop Filter）部分
=====================================================
本文简单记录一下FFmpeg的libavcodec中与libx264接口部分的源代码。该部分源代码位于“libavcodec/libx264.c”中。正是有了这部分代码，使得FFmpeg可以调用libx264编码H.264视频。
函数调用关系图
FFmpeg的libavcodec中的libx264.c的函数调用关系如下图所示。
从图中可以看出，libx264对应的AVCodec结构体ff_libx264_encoder中设定编码器初始化函数是X264_init()，编码一帧数据的函数是X264_frame()，编码器关闭函数是X264_close()。
X264_init()调用了如下函数：[libx264 API] x264_param_default()：设置默认参数。X264_frame()调用了如下函数：
[libx264 API] x264_param_default_preset()：设置默认preset。
convert_pix_fmt()：将FFmpeg像素格式转换为libx264像素格式。
[libx264 API] x264_param_apply_profile()：设置Profile。
[libx264 API] x264_encoder_open()：打开编码器。
[libx264 API] x264_encoder_headers()：需要全局头的时候，输出头信息。
[libx264 API] x264_encoder_encode()：编码一帧数据。X264_close()调用了如下函数：
[libx264 API] x264_encoder_delayed_frames()：输出编码器中缓存的数据。
encode_nals()：将编码后得到的x264_nal_t转换为AVPacket。
[libx264 API] x264_encoder_close()：关闭编码器。
下文将会分别分析X264_init()，X264_frame()和X264_close()这三个函数。
ff_libx264_encoder
ff_libx264_encoder是libx264对应的AVCodec结构体，定义如下所示。//libx264对应的AVCodec结构体AVCodec ff_libx264_encoder = { .name = "libx264", .long_name = NULL_IF_CONFIG_SMALL("libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10"), .type = AVMEDIA_TYPE_VIDEO, .id = AV_CODEC_ID_H264, .priv_data_size = sizeof(X264Context), .init = X264_init, .encode2 = X264_frame, .close = X264_close, .capabilities = CODEC_CAP_DELAY | CODEC_CAP_AUTO_THREADS, .priv_class = &x264_class, .defaults = x264_defaults, .init_static_data = X264_init_static,};从ff_libx264_encoder定义中可以看出：init()指向X264_init()，encode2()指向 X264_frame()， close()指向 X264_close()。此外priv_class指向一个x264_class静态结构体，该结构体是libx264对应的AVClass，定义如下。
static const AVClass x264_class = { .class_name = "libx264", .item_name = av_default_item_name, .option = options,//选项 .version = LIBAVUTIL_VERSION_INT,};x264_class中的option指向一个options[]静态数组，其中包含了libx264支持的AVOption选项，如下所示。
//FFmpeg针对libx264提供的可以通过AVOption设置的选项#define OFFSET(x) offsetof(X264Context, x)#define VE AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_ENCODING_PARAMstatic const AVOption options[] = { { "preset", "Set the encoding preset (cf. x264 --fullhelp)", OFFSET(preset), AV_OPT_TYPE_STRING, { .str = "medium" }, 0, 0, VE}, { "tune", "Tune the encoding params (cf. x264 --fullhelp)", OFFSET(tune), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE}, { "profile", "Set profile restrictions (cf. x264 --fullhelp) ", OFFSET(profile), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE}, { "fastfirstpass", "Use fast settings when encoding first pass", OFFSET(fastfirstpass), AV_OPT_TYPE_INT, { .i64 = 1 }, 0, 1, VE}, {"level", "Specify level (as defined by Annex A)", OFFSET(level), AV_OPT_TYPE_STRING, {.str=NULL}, 0, 0, VE}, {"passlogfile", "Filename for 2 pass stats", OFFSET(stats), AV_OPT_TYPE_STRING, {.str=NULL}, 0, 0, VE}, {"wpredp", "Weighted prediction for P-frames", OFFSET(wpredp), AV_OPT_TYPE_STRING, {.str=NULL}, 0, 0, VE}, {"x264opts", "x264 options", OFFSET(x264opts), AV_OPT_TYPE_STRING, {.str=NULL}, 0, 0, VE}, { "crf", "Select the quality for constant quality mode", OFFSET(crf), AV_OPT_TYPE_FLOAT, {.dbl = -1 }, -1, FLT_MAX, VE }, { "crf_max", "In CRF mode, prevents VBV from lowering quality beyond this point.",OFFSET(crf_max), AV_OPT_TYPE_FLOAT, {.dbl = -1 }, -1, FLT_MAX, VE }, { "qp", "Constant quantization parameter rate control method",OFFSET(cqp), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE }, { "aq-mode", "AQ method", OFFSET(aq_mode), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE, "aq_mode"}, { "none", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_AQ_NONE}, INT_MIN, INT_MAX, VE, "aq_mode" }, { "variance", "Variance AQ (complexity mask)", 0, AV_OPT_TYPE_CONST, {.i64 = X264_AQ_VARIANCE}, INT_MIN, INT_MAX, VE, "aq_mode" }, { "autovariance", "Auto-variance AQ (experimental)", 0, AV_OPT_TYPE_CONST, {.i64 = X264_AQ_AUTOVARIANCE}, INT_MIN, INT_MAX, VE, "aq_mode" }, { "aq-strength", "AQ strength. Reduces blocking and blurring in flat and textured areas.", OFFSET(aq_strength), AV_OPT_TYPE_FLOAT, {.dbl = -1}, -1, FLT_MAX, VE}, { "psy", "Use psychovisual optimizations.", OFFSET(psy), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, { "psy-rd", "Strength of psychovisual optimization, in <psy-rd>:<psy-trellis> format.", OFFSET(psy_rd), AV_OPT_TYPE_STRING, {0 }, 0, 0, VE}, { "rc-lookahead", "Number of frames to look ahead for frametype and ratecontrol", OFFSET(rc_lookahead), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE }, { "weightb", "Weighted prediction for B-frames.", OFFSET(weightb), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, { "weightp", "Weighted prediction analysis method.", OFFSET(weightp), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE, "weightp" }, { "none", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_WEIGHTP_NONE}, INT_MIN, INT_MAX, VE, "weightp" }, { "simple", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_WEIGHTP_SIMPLE}, INT_MIN, INT_MAX, VE, "weightp" }, { "smart", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_WEIGHTP_SMART}, INT_MIN, INT_MAX, VE, "weightp" }, { "ssim", "Calculate and print SSIM stats.", OFFSET(ssim), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, { "intra-refresh", "Use Periodic Intra Refresh instead of IDR frames.",OFFSET(intra_refresh),AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, { "bluray-compat", "Bluray compatibility workarounds.", OFFSET(bluray_compat) ,AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, { "b-bias", "Influences how often B-frames are used", OFFSET(b_bias), AV_OPT_TYPE_INT, { .i64 = INT_MIN}, INT_MIN, INT_MAX, VE }, { "b-pyramid", "Keep some B-frames as references.", OFFSET(b_pyramid), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE, "b_pyramid" }, { "none", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_B_PYRAMID_NONE}, INT_MIN, INT_MAX, VE, "b_pyramid" }, { "strict", "Strictly hierarchical pyramid", 0, AV_OPT_TYPE_CONST, {.i64 = X264_B_PYRAMID_STRICT}, INT_MIN, INT_MAX, VE, "b_pyramid" }, { "normal", "Non-strict (not Blu-ray compatible)", 0, AV_OPT_TYPE_CONST, {.i64 = X264_B_PYRAMID_NORMAL}, INT_MIN, INT_MAX, VE, "b_pyramid" }, { "mixed-refs", "One reference per partition, as opposed to one reference per macroblock", OFFSET(mixed_refs), AV_OPT_TYPE_INT, { .i64 = -1}, -1, 1, VE }, { "8x8dct", "High profile 8x8 transform.", OFFSET(dct8x8), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE}, { "fast-pskip", NULL, OFFSET(fast_pskip), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE}, { "aud", "Use access unit delimiters.", OFFSET(aud), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE}, { "mbtree", "Use macroblock tree ratecontrol.", OFFSET(mbtree), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE}, { "deblock", "Loop filter parameters, in <alpha:beta> form.", OFFSET(deblock), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE}, { "cplxblur", "Reduce fluctuations in QP (before curve compression)", OFFSET(cplxblur), AV_OPT_TYPE_FLOAT, {.dbl = -1 }, -1, FLT_MAX, VE}, { "partitions", "A comma-separated list of partitions to consider. " "Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all", OFFSET(partitions), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE}, { "direct-pred", "Direct MV prediction mode", OFFSET(direct_pred), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE, "direct-pred" }, { "none", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = X264_DIRECT_PRED_NONE }, 0, 0, VE, "direct-pred" }, { "spatial", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = X264_DIRECT_PRED_SPATIAL }, 0, 0, VE, "direct-pred" }, { "temporal", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = X264_DIRECT_PRED_TEMPORAL }, 0, 0, VE, "direct-pred" }, { "auto", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = X264_DIRECT_PRED_AUTO }, 0, 0, VE, "direct-pred" }, { "slice-max-size","Limit the size of each slice in bytes", OFFSET(slice_max_size),AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE }, { "stats", "Filename for 2 pass stats", OFFSET(stats), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE }, { "nal-hrd", "Signal HRD information (requires vbv-bufsize; " "cbr not allowed in .mp4)", OFFSET(nal_hrd), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, VE, "nal-hrd" }, { "none", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_NAL_HRD_NONE}, INT_MIN, INT_MAX, VE, "nal-hrd" }, { "vbr", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_NAL_HRD_VBR}, INT_MIN, INT_MAX, VE, "nal-hrd" }, { "cbr", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = X264_NAL_HRD_CBR}, INT_MIN, INT_MAX, VE, "nal-hrd" }, { "avcintra-class","AVC-Intra class 50/100/200", OFFSET(avcintra_class),AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 200 , VE}, { "x264-params", "Override the x264 configuration using a :-separated list of key=value parameters", OFFSET(x264_params), AV_OPT_TYPE_STRING, { 0 }, 0, 0, VE }, { NULL },};options[]数组中包含的选项支持在FFmpeg中通过AVOption进行设置。
X264_init()
X264_init()用于初始化libx264编码器。该函数的定义如下所示。//libx264编码器初始化static av_cold int X264_init(AVCodecContext *avctx){//FFmpeg中针对libx264的私有结构体 X264Context *x4 = avctx->priv_data; int sw,sh; if (avctx->global_quality > 0) av_log(avctx, AV_LOG_WARNING, "-qscale is ignored, -crf is recommended.\n"); //[libx264 API] 设置默认参数 x264_param_default(&x4->params); x4->params.b_deblocking_filter = avctx->flags & CODEC_FLAG_LOOP_FILTER; if (x4->preset || x4->tune) if (x264_param_default_preset(&x4->params, x4->preset, x4->tune) < 0) { //[libx264 API] 设置preset int i; av_log(avctx, AV_LOG_ERROR, "Error setting preset/tune %s/%s.\n", x4->preset, x4->tune); av_log(avctx, AV_LOG_INFO, "Possible presets:"); for (i = 0; x264_preset_names[i]; i++) av_log(avctx, AV_LOG_INFO, " %s", x264_preset_names[i]); av_log(avctx, AV_LOG_INFO, "\n"); av_log(avctx, AV_LOG_INFO, "Possible tunes:"); for (i = 0; x264_tune_names[i]; i++) av_log(avctx, AV_LOG_INFO, " %s", x264_tune_names[i]); av_log(avctx, AV_LOG_INFO, "\n"); return AVERROR(EINVAL); } if (avctx->level > 0) x4->params.i_level_idc = avctx->level; //libx264日志输出设置为FFmpeg的日志输出 x4->params.pf_log = X264_log; x4->params.p_log_private = avctx; x4->params.i_log_level = X264_LOG_DEBUG; //FFmpeg像素格式映射到libx264 x4->params.i_csp = convert_pix_fmt(avctx->pix_fmt); OPT_STR("weightp", x4->wpredp); //FFmpeg码率映射到libx264 if (avctx->bit_rate) { x4->params.rc.i_bitrate = avctx->bit_rate / 1000; x4->params.rc.i_rc_method = X264_RC_ABR; } x4->params.rc.i_vbv_buffer_size = avctx->rc_buffer_size / 1000; x4->params.rc.i_vbv_max_bitrate = avctx->rc_max_rate / 1000; x4->params.rc.b_stat_write = avctx->flags & CODEC_FLAG_PASS1; if (avctx->flags & CODEC_FLAG_PASS2) { x4->params.rc.b_stat_read = 1; } else { if (x4->crf >= 0) { x4->params.rc.i_rc_method = X264_RC_CRF; x4->params.rc.f_rf_constant = x4->crf; } else if (x4->cqp >= 0) { x4->params.rc.i_rc_method = X264_RC_CQP; x4->params.rc.i_qp_constant = x4->cqp; } if (x4->crf_max >= 0) x4->params.rc.f_rf_constant_max = x4->crf_max; } if (avctx->rc_buffer_size && avctx->rc_initial_buffer_occupancy > 0 && (avctx->rc_initial_buffer_occupancy <= avctx->rc_buffer_size)) { x4->params.rc.f_vbv_buffer_init = (float)avctx->rc_initial_buffer_occupancy / avctx->rc_buffer_size; } OPT_STR("level", x4->level); if (avctx->i_quant_factor > 0) x4->params.rc.f_ip_factor = 1 / fabs(avctx->i_quant_factor); if (avctx->b_quant_factor > 0) x4->params.rc.f_pb_factor = avctx->b_quant_factor; if (avctx->chromaoffset) x4->params.analyse.i_chroma_qp_offset = avctx->chromaoffset; //FFmpeg运动估计方法映射到libx264 if (avctx->me_method == ME_EPZS) x4->params.analyse.i_me_method = X264_ME_DIA; else if (avctx->me_method == ME_HEX) x4->params.analyse.i_me_method = X264_ME_HEX; else if (avctx->me_method == ME_UMH) x4->params.analyse.i_me_method = X264_ME_UMH; else if (avctx->me_method == ME_FULL) x4->params.analyse.i_me_method = X264_ME_ESA; else if (avctx->me_method == ME_TESA) x4->params.analyse.i_me_method = X264_ME_TESA; //把AVCodecContext的值（主要是编码时候的一些通用选项）映射到x264_param_t if (avctx->gop_size >= 0) x4->params.i_keyint_max = avctx->gop_size; if (avctx->max_b_frames >= 0) x4->params.i_bframe = avctx->max_b_frames; if (avctx->scenechange_threshold >= 0) x4->params.i_scenecut_threshold = avctx->scenechange_threshold; if (avctx->qmin >= 0) x4->params.rc.i_qp_min = avctx->qmin; if (avctx->qmax >= 0) x4->params.rc.i_qp_max = avctx->qmax; if (avctx->max_qdiff >= 0) x4->params.rc.i_qp_step = avctx->max_qdiff; if (avctx->qblur >= 0) x4->params.rc.f_qblur = avctx->qblur; /* temporally blur quants */ if (avctx->qcompress >= 0) x4->params.rc.f_qcompress = avctx->qcompress; /* 0.0 => cbr, 1.0 => constant qp */ if (avctx->refs >= 0) x4->params.i_frame_reference = avctx->refs; else if (x4->level) { int i; int mbn = FF_CEIL_RSHIFT(avctx->width, 4) * FF_CEIL_RSHIFT(avctx->height, 4); int level_id = -1; char *tail; int scale = X264_BUILD < 129 ? 384 : 1; if (!strcmp(x4->level, "1b")) { level_id = 9; } else if (strlen(x4->level) <= 3){ level_id = av_strtod(x4->level, &tail) * 10 + 0.5; if (*tail) level_id = -1; } if (level_id <= 0) av_log(avctx, AV_LOG_WARNING, "Failed to parse level\n"); for (i = 0; i<x264_levels[i].level_idc; i++) if (x264_levels[i].level_idc == level_id) x4->params.i_frame_reference = av_clip(x264_levels[i].dpb / mbn / scale, 1, x4->params.i_frame_reference); } if (avctx->trellis >= 0) x4->params.analyse.i_trellis = avctx->trellis; if (avctx->me_range >= 0) x4->params.analyse.i_me_range = avctx->me_range; if (avctx->noise_reduction >= 0) x4->params.analyse.i_noise_reduction = avctx->noise_reduction; if (avctx->me_subpel_quality >= 0) x4->params.analyse.i_subpel_refine = avctx->me_subpel_quality; if (avctx->b_frame_strategy >= 0) x4->params.i_bframe_adaptive = avctx->b_frame_strategy; if (avctx->keyint_min >= 0) x4->params.i_keyint_min = avctx->keyint_min; if (avctx->coder_type >= 0) x4->params.b_cabac = avctx->coder_type == FF_CODER_TYPE_AC; if (avctx->me_cmp >= 0) x4->params.analyse.b_chroma_me = avctx->me_cmp & FF_CMP_CHROMA; //把X264Context中的信息（主要是针对于libx264的一些选项）映射到x264_param_t if (x4->aq_mode >= 0) x4->params.rc.i_aq_mode = x4->aq_mode; if (x4->aq_strength >= 0) x4->params.rc.f_aq_strength = x4->aq_strength; PARSE_X264_OPT("psy-rd", psy_rd); PARSE_X264_OPT("deblock", deblock); PARSE_X264_OPT("partitions", partitions); PARSE_X264_OPT("stats", stats); if (x4->psy >= 0) x4->params.analyse.b_psy = x4->psy; if (x4->rc_lookahead >= 0) x4->params.rc.i_lookahead = x4->rc_lookahead; if (x4->weightp >= 0) x4->params.analyse.i_weighted_pred = x4->weightp; if (x4->weightb >= 0) x4->params.analyse.b_weighted_bipred = x4->weightb; if (x4->cplxblur >= 0) x4->params.rc.f_complexity_blur = x4->cplxblur; if (x4->ssim >= 0) x4->params.analyse.b_ssim = x4->ssim; if (x4->intra_refresh >= 0) x4->params.b_intra_refresh = x4->intra_refresh; if (x4->bluray_compat >= 0) { x4->params.b_bluray_compat = x4->bluray_compat; x4->params.b_vfr_input = 0; } if (x4->avcintra_class >= 0)#if X264_BUILD >= 142 x4->params.i_avcintra_class = x4->avcintra_class;#else av_log(avctx, AV_LOG_ERROR, "x264 too old for AVC Intra, at least version 142 needed\n");#endif if (x4->b_bias != INT_MIN) x4->params.i_bframe_bias = x4->b_bias; if (x4->b_pyramid >= 0) x4->params.i_bframe_pyramid = x4->b_pyramid; if (x4->mixed_refs >= 0) x4->params.analyse.b_mixed_references = x4->mixed_refs; if (x4->dct8x8 >= 0) x4->params.analyse.b_transform_8x8 = x4->dct8x8; if (x4->fast_pskip >= 0) x4->params.analyse.b_fast_pskip = x4->fast_pskip; if (x4->aud >= 0) x4->params.b_aud = x4->aud; if (x4->mbtree >= 0) x4->params.rc.b_mb_tree = x4->mbtree; if (x4->direct_pred >= 0) x4->params.analyse.i_direct_mv_pred = x4->direct_pred; if (x4->slice_max_size >= 0) x4->params.i_slice_max_size = x4->slice_max_size; else { /* * Allow x264 to be instructed through AVCodecContext about the maximum * size of the RTP payload. For example, this enables the production of * payload suitable for the H.264 RTP packetization-mode 0 i.e. single * NAL unit per RTP packet. */ if (avctx->rtp_payload_size) x4->params.i_slice_max_size = avctx->rtp_payload_size; } if (x4->fastfirstpass) x264_param_apply_fastfirstpass(&x4->params); /* Allow specifying the x264 profile through AVCodecContext. */ //设置Profile if (!x4->profile) switch (avctx->profile) { case FF_PROFILE_H264_BASELINE: x4->profile = av_strdup("baseline"); break; case FF_PROFILE_H264_HIGH: x4->profile = av_strdup("high"); break; case FF_PROFILE_H264_HIGH_10: x4->profile = av_strdup("high10"); break; case FF_PROFILE_H264_HIGH_422: x4->profile = av_strdup("high422"); break; case FF_PROFILE_H264_HIGH_444: x4->profile = av_strdup("high444"); break; case FF_PROFILE_H264_MAIN: x4->profile = av_strdup("main"); break; default: break; } if (x4->nal_hrd >= 0) x4->params.i_nal_hrd = x4->nal_hrd; // if (x4->profile) if (x264_param_apply_profile(&x4->params, x4->profile) < 0) { int i; av_log(avctx, AV_LOG_ERROR, "Error setting profile %s.\n", x4->profile); av_log(avctx, AV_LOG_INFO, "Possible profiles:"); for (i = 0; x264_profile_names[i]; i++) av_log(avctx, AV_LOG_INFO, " %s", x264_profile_names[i]); av_log(avctx, AV_LOG_INFO, "\n"); return AVERROR(EINVAL); } //宽高，帧率等 x4->params.i_width = avctx->width; x4->params.i_height = avctx->height; av_reduce(&sw, &sh, avctx->sample_aspect_ratio.num, avctx->sample_aspect_ratio.den, 4096); x4->params.vui.i_sar_width = sw; x4->params.vui.i_sar_height = sh; x4->params.i_timebase_den = avctx->time_base.den; x4->params.i_timebase_num = avctx->time_base.num; x4->params.i_fps_num = avctx->time_base.den; x4->params.i_fps_den = avctx->time_base.num * avctx->ticks_per_frame; x4->params.analyse.b_psnr = avctx->flags & CODEC_FLAG_PSNR; x4->params.i_threads = avctx->thread_count; if (avctx->thread_type) x4->params.b_sliced_threads = avctx->thread_type == FF_THREAD_SLICE; x4->params.b_interlaced = avctx->flags & CODEC_FLAG_INTERLACED_DCT; x4->params.b_open_gop = !(avctx->flags & CODEC_FLAG_CLOSED_GOP); x4->params.i_slice_count = avctx->slices; x4->params.vui.b_fullrange = avctx->pix_fmt == AV_PIX_FMT_YUVJ420P || avctx->pix_fmt == AV_PIX_FMT_YUVJ422P || avctx->pix_fmt == AV_PIX_FMT_YUVJ444P || avctx->color_range == AVCOL_RANGE_JPEG; if (avctx->colorspace != AVCOL_SPC_UNSPECIFIED) x4->params.vui.i_colmatrix = avctx->colorspace; if (avctx->color_primaries != AVCOL_PRI_UNSPECIFIED) x4->params.vui.i_colorprim = avctx->color_primaries; if (avctx->color_trc != AVCOL_TRC_UNSPECIFIED) x4->params.vui.i_transfer = avctx->color_trc; if (avctx->flags & CODEC_FLAG_GLOBAL_HEADER) x4->params.b_repeat_headers = 0; if(x4->x264opts){ const char *p= x4->x264opts; while(p){ char param[256]={0}, val[256]={0}; if(sscanf(p, "%255[^:=]=%255[^:]", param, val) == 1){ OPT_STR(param, "1"); }else OPT_STR(param, val); p= strchr(p, ':'); p+=!!p; } } if (x4->x264_params) { AVDictionary *dict = NULL; AVDictionaryEntry *en = NULL; if (!av_dict_parse_string(&dict, x4->x264_params, "=", ":", 0)) { while ((en = av_dict_get(dict, "", en, AV_DICT_IGNORE_SUFFIX))) { if (x264_param_parse(&x4->params, en->key, en->value) < 0) av_log(avctx, AV_LOG_WARNING, "Error parsing option '%s = %s'.\n", en->key, en->value); } av_dict_free(&dict); } } // update AVCodecContext with x264 parameters avctx->has_b_frames = x4->params.i_bframe ? x4->params.i_bframe_pyramid ? 2 : 1 : 0; if (avctx->max_b_frames < 0) avctx->max_b_frames = 0; avctx->bit_rate = x4->params.rc.i_bitrate*1000; //------------------------- //设置完参数后，打开编码器 x4->enc = x264_encoder_open(&x4->params); if (!x4->enc) return -1; avctx->coded_frame = av_frame_alloc(); if (!avctx->coded_frame) return AVERROR(ENOMEM); //如果需要全局头 if (avctx->flags & CODEC_FLAG_GLOBAL_HEADER) { x264_nal_t *nal; uint8_t *p; int nnal, s, i; s = x264_encoder_headers(x4->enc, &nal, &nnal); avctx->extradata = p = av_malloc(s); for (i = 0; i < nnal; i++) { /* Don't put the SEI in extradata. */ if (nal[i].i_type == NAL_SEI) { av_log(avctx, AV_LOG_INFO, "%s\n", nal[i].p_payload+25); x4->sei_size = nal[i].i_payload; x4->sei = av_malloc(x4->sei_size); memcpy(x4->sei, nal[i].p_payload, nal[i].i_payload); continue; } memcpy(p, nal[i].p_payload, nal[i].i_payload); p += nal[i].i_payload; } avctx->extradata_size = p - avctx->extradata; } return 0;}从源代码可以看出，X264_init()主要将各种选项值传递给libx264。这些选项有两个来源：AVCodecContext和X264Context。AVCodecContext中包含了编码器的一些通用选项，而X264Context包含了一些libx264特有的选项。在这里需要注意，FFmpeg中的一些选项的单位和libx264中对应选项的单位是不一样的，因此需要做一些转换。例如像素格式的转换函数convert_pix_fmt()就是完成了这个功能。该函数的定义如下所示。
//映射FFmpeg和libx264的像素格式static int convert_pix_fmt(enum AVPixelFormat pix_fmt){ switch (pix_fmt) { case AV_PIX_FMT_YUV420P: case AV_PIX_FMT_YUVJ420P: case AV_PIX_FMT_YUV420P9: case AV_PIX_FMT_YUV420P10: return X264_CSP_I420; case AV_PIX_FMT_YUV422P: case AV_PIX_FMT_YUVJ422P: case AV_PIX_FMT_YUV422P10: return X264_CSP_I422; case AV_PIX_FMT_YUV444P: case AV_PIX_FMT_YUVJ444P: case AV_PIX_FMT_YUV444P9: case AV_PIX_FMT_YUV444P10: return X264_CSP_I444;#ifdef X264_CSP_BGR case AV_PIX_FMT_BGR24: return X264_CSP_BGR; case AV_PIX_FMT_RGB24: return X264_CSP_RGB;#endif case AV_PIX_FMT_NV12: return X264_CSP_NV12; case AV_PIX_FMT_NV16: case AV_PIX_FMT_NV20: return X264_CSP_NV16; }; return 0;}可以看出convert_pix_fmt()将AV_PIX_FMT_XXX转换成了X264_CSP_XXX。
在一切参数设置完毕后，X264_init()会调用x264_encoder_open()打开编码器，完成初始化工作。
X264_frame()
X264_frame()用于编码一帧视频数据。该函数的定义如下所示。//libx264编码1帧数据//// AVFrame --> x264_picture_t --> x264_nal_t --> AVPacket//static int X264_frame(AVCodecContext *ctx, AVPacket *pkt, const AVFrame *frame, int *got_packet){ X264Context *x4 = ctx->priv_data; x264_nal_t *nal; int nnal, i, ret; x264_picture_t pic_out = {0}; AVFrameSideData *side_data; x264_picture_init( &x4->pic ); x4->pic.img.i_csp = x4->params.i_csp; if (x264_bit_depth > 8) x4->pic.img.i_csp |= X264_CSP_HIGH_DEPTH; x4->pic.img.i_plane = avfmt2_num_planes(ctx->pix_fmt); if (frame) { //将AVFrame中的数据赋值给x264_picture_t // // AVFrame --> x264_picture_t // for (i = 0; i < x4->pic.img.i_plane; i++) { x4->pic.img.plane[i] = frame->data[i]; x4->pic.img.i_stride[i] = frame->linesize[i]; } x4->pic.i_pts = frame->pts; //设置帧类型 x4->pic.i_type = frame->pict_type == AV_PICTURE_TYPE_I ? X264_TYPE_KEYFRAME : frame->pict_type == AV_PICTURE_TYPE_P ? X264_TYPE_P : frame->pict_type == AV_PICTURE_TYPE_B ? X264_TYPE_B : X264_TYPE_AUTO; //检查参数设置是否正确，不正确就重新设置 if (x4->avcintra_class < 0) { if (x4->params.b_interlaced && x4->params.b_tff != frame->top_field_first) { x4->params.b_tff = frame->top_field_first; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->params.vui.i_sar_height != ctx->sample_aspect_ratio.den || x4->params.vui.i_sar_width != ctx->sample_aspect_ratio.num) { x4->params.vui.i_sar_height = ctx->sample_aspect_ratio.den; x4->params.vui.i_sar_width = ctx->sample_aspect_ratio.num; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->params.rc.i_vbv_buffer_size != ctx->rc_buffer_size / 1000 || x4->params.rc.i_vbv_max_bitrate != ctx->rc_max_rate / 1000) { x4->params.rc.i_vbv_buffer_size = ctx->rc_buffer_size / 1000; x4->params.rc.i_vbv_max_bitrate = ctx->rc_max_rate / 1000; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->params.rc.i_rc_method == X264_RC_ABR && x4->params.rc.i_bitrate != ctx->bit_rate / 1000) { x4->params.rc.i_bitrate = ctx->bit_rate / 1000; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->crf >= 0 && x4->params.rc.i_rc_method == X264_RC_CRF && x4->params.rc.f_rf_constant != x4->crf) { x4->params.rc.f_rf_constant = x4->crf; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->params.rc.i_rc_method == X264_RC_CQP && x4->cqp >= 0 && x4->params.rc.i_qp_constant != x4->cqp) { x4->params.rc.i_qp_constant = x4->cqp; x264_encoder_reconfig(x4->enc, &x4->params); } if (x4->crf_max >= 0 && x4->params.rc.f_rf_constant_max != x4->crf_max) { x4->params.rc.f_rf_constant_max = x4->crf_max; x264_encoder_reconfig(x4->enc, &x4->params); } } side_data = av_frame_get_side_data(frame, AV_FRAME_DATA_STEREO3D); if (side_data) { AVStereo3D *stereo = (AVStereo3D *)side_data->data; int fpa_type; switch (stereo->type) { case AV_STEREO3D_CHECKERBOARD: fpa_type = 0; break; case AV_STEREO3D_COLUMNS: fpa_type = 1; break; case AV_STEREO3D_LINES: fpa_type = 2; break; case AV_STEREO3D_SIDEBYSIDE: fpa_type = 3; break; case AV_STEREO3D_TOPBOTTOM: fpa_type = 4; break; case AV_STEREO3D_FRAMESEQUENCE: fpa_type = 5; break; default: fpa_type = -1; break; } if (fpa_type != x4->params.i_frame_packing) { x4->params.i_frame_packing = fpa_type; x264_encoder_reconfig(x4->enc, &x4->params); } } } do { //[libx264 API] 编码 // // x264_picture_t --> x264_nal_t // if (x264_encoder_encode(x4->enc, &nal, &nnal, frame? &x4->pic: NULL, &pic_out) < 0) return -1; //把x264_nal_t赋值给AVPacket // // x264_nal_t --> AVPacket // ret = encode_nals(ctx, pkt, nal, nnal); if (ret < 0) return -1; } while (!ret && !frame && x264_encoder_delayed_frames(x4->enc)); //赋值AVPacket相关的字段 pkt->pts = pic_out.i_pts; pkt->dts = pic_out.i_dts; switch (pic_out.i_type) { case X264_TYPE_IDR: case X264_TYPE_I: ctx->coded_frame->pict_type = AV_PICTURE_TYPE_I; break; case X264_TYPE_P: ctx->coded_frame->pict_type = AV_PICTURE_TYPE_P; break; case X264_TYPE_B: case X264_TYPE_BREF: ctx->coded_frame->pict_type = AV_PICTURE_TYPE_B; break; } pkt->flags |= AV_PKT_FLAG_KEY*pic_out.b_keyframe; if (ret) ctx->coded_frame->quality = (pic_out.i_qpplus1 - 1) * FF_QP2LAMBDA; *got_packet = ret; return 0;}从源代码可以看出，X264_frame()调用x264_encoder_encode()完成了编码工作。x264_encoder_encode()的输入是x264_picture_t，输出是x264_nal_t；而X264_frame()的输入是AVFrame，输出是AVPacket。因此X264_frame()在调用编码函数前将AVFrame转换成了x264_picture_t，而在调用编码函数之后调用encode_nals()将x264_nal_t转换成了AVPacket。转换函数encode_nals()的定义如下所示。
//把x264_nal_t赋值给AVPacket//// x264_nal_t --> AVPacket//static int encode_nals(AVCodecContext *ctx, AVPacket *pkt, const x264_nal_t *nals, int nnal){ X264Context *x4 = ctx->priv_data; uint8_t *p; int i, size = x4->sei_size, ret; if (!nnal) return 0; //NALU的大小 //可能有多个NALU for (i = 0; i < nnal; i++) size += nals[i].i_payload; if ((ret = ff_alloc_packet2(ctx, pkt, size)) < 0) return ret; //p指向AVPacket的data p = pkt->data; /* Write the SEI as part of the first frame. */ if (x4->sei_size > 0 && nnal > 0) { if (x4->sei_size > size) { av_log(ctx, AV_LOG_ERROR, "Error: nal buffer is too small\n"); return -1; } memcpy(p, x4->sei, x4->sei_size); p += x4->sei_size; x4->sei_size = 0; av_freep(&x4->sei); } //拷贝x264_nal_t的数据至AVPacket的数据 //可能有多个NALU for (i = 0; i < nnal; i++){ memcpy(p, nals[i].p_payload, nals[i].i_payload); p += nals[i].i_payload; } return 1;}从源代码可以看出，encode_nals()的作用就是将多个x264_nal_t合并为一个AVPacket。
X264_close()
X264_close()用于关闭libx264解码器。该函数的定义如下所示。//libx264关闭解码器static av_cold int X264_close(AVCodecContext *avctx){ X264Context *x4 = avctx->priv_data; av_freep(&avctx->extradata); av_freep(&x4->sei); //[libx264 API] 关闭解码器 if (x4->enc) x264_encoder_close(x4->enc); av_frame_free(&avctx->coded_frame); return 0;}可以看出X264_close()调用x264_encoder_close()关闭了libx264编码器。
雷霄骅
leixiaohua1020@126.com
http://blog.csdn.net/leixiaohua1020
8 3
- FFmpeg与libx264接口源代码简单分析
- FFmpeg与libx264接口源代码简单分析
- FFmpeg与libx264 x264接口源代码简单分析
- FFmpeg与libx264 x264接口对应关系源代码分析
- ffmpeg 源代码简单分析 ： av_register_all()
- ffmpeg 源代码简单分析 ： avcodec_register_all()
- ffmpeg 源代码简单分析 ： av_read_frame()
- ffmpeg 源代码简单分析 ： avcodec_decode_video2()
- ffmpeg 源代码简单分析 ： av_register_all()
- ffmpeg 源代码简单分析 ： avcodec_register_all()
- ffmpeg 源代码简单分析 ：av_read_frame()
- ffmpeg源代码简单分析 ：avcodec_decode_video2()
- ffmpeg 源代码简单分析 ： av_register_all()
- ffmpeg 源代码简单分析 ： avcodec_register_all()
- ffmpeg 源代码简单分析 ： av_read_frame()
- ffmpeg 源代码简单分析 ： avcodec_decode_video2()
- ffmpeg 源代码简单分析 ： av_register_all()
- ffmpeg 源代码简单分析 ： avcodec_register_all()
- 鼻号诜势弊铀兰驼膳俨郝一郴缕壤
- C++继承(2) - 虚函数与运行时多态
- 啡救赜颂人倘白弦几势商航孕饶鞘
- UVA - 11709 Trust groups （强连通分量）
- 辟蕴顺未弦级舜琳舜商访前驳又烦
- FFmpeg与libx264接口源代码简单分析
- 竟颐痰逞戮财蛹俦郧敖诿泄轮胁姨
- Android Drawable Resource学习（一）、Drawable Resource简介
- 矣砂溉咳菏儇械邪巢誓蘸裂澳拍盏
- 哦值孟吩投越琳窍玖云妒亩坠鹤殉
- Android Drawable Resource学习（二）、BitmapDrawable和Bitmap
- 纶南臀繁逞那覆景刹窝痪纱痪艺豆
- 可视终端展视设备的宽，高和缩放的设置
- 偈智蹈备环倩淹覆航媒宋屡宗窖湃
