hdu5251最小矩形覆盖
来源:互联网 发布:赢顺期货软件 编辑:程序博客网 时间:2024/06/05 15:31
题意(中问题直接粘吧)
矩形面积
Problem Description
小度熊有一个桌面,小度熊剪了很多矩形放在桌面上,小度熊想知道能把这些矩形包围起来的面积最小的矩形的面积是多少。
Input
第一行一个正整数 T,代表测试数据组数(1≤T≤20),接下来 T 组测试数据。
每组测试数据占若干行,第一行一个正整数 N(1≤N<≤1000),代表矩形的数量。接下来 N 行,每行 8 个整数x1,y1,x2,y2,x3,y3,x4,y4,代表矩形的四个点坐标,坐标绝对值不会超过10000。
Output
对于每组测试数据,输出两行:
第一行输出"Case #i:",i 代表第 i 组测试数据。
第二行包含1 个数字,代表面积最小的矩形的面积,结果保留到整数位。
Sample Input
2
2
5 10 5 8 3 10 3 8
8 8 8 6 7 8 7 6
1
0 0 2 2 2 0 0 2
Sample Output
Case #1:
17
Case #2:
4
思路:
矩形面积
Problem Description
小度熊有一个桌面,小度熊剪了很多矩形放在桌面上,小度熊想知道能把这些矩形包围起来的面积最小的矩形的面积是多少。
Input
第一行一个正整数 T,代表测试数据组数(1≤T≤20),接下来 T 组测试数据。
每组测试数据占若干行,第一行一个正整数 N(1≤N<≤1000),代表矩形的数量。接下来 N 行,每行 8 个整数x1,y1,x2,y2,x3,y3,x4,y4,代表矩形的四个点坐标,坐标绝对值不会超过10000。
Output
对于每组测试数据,输出两行:
第一行输出"Case #i:",i 代表第 i 组测试数据。
第二行包含1 个数字,代表面积最小的矩形的面积,结果保留到整数位。
Sample Input
2
2
5 10 5 8 3 10 3 8
8 8 8 6 7 8 7 6
1
0 0 2 2 2 0 0 2
Sample Output
Case #1:
17
Case #2:
4
思路:
矩形不是凸出来的东西,吐出来的部分肯定是点,怎么连接边都在点连线的里面,这样就是求n*4个点的最小矩形覆盖面积,直接来个模板就行了,一开始用自己以前写的一个三分的方法来旋转角度去求,一直wa,感觉那个只能求正方形吧,这个是在网上找的,还有第一次暴栈了,记得加上外挂开战的那个东西。
#pragma comment(linker, "/STACK:1024000000,1024000000")#include<math.h>#include<stdio.h>#include<string.h>#include<algorithm>using namespace std;typedef double typev;const double eps = 1e-8;const int N = 50005;int sign(double d){ return d < -eps ? -1 : (d > eps);}struct point{ typev x, y; point operator-(point d){ point dd; dd.x = this->x - d.x; dd.y = this->y - d.y; return dd; } point operator+(point d){ point dd; dd.x = this->x + d.x; dd.y = this->y + d.y; return dd; }}ps[N];//int n, cn;double dist(point d1, point d2){ return sqrt(pow(d1.x - d2.x, 2.0) + pow(d1.y - d2.y, 2.0));}double dist2(point d1, point d2){ return pow(d1.x - d2.x, 2.0) + pow(d1.y - d2.y, 2.0);}bool cmp(point d1, point d2){ return d1.y < d2.y || (d1.y == d2.y && d1.x < d2.x);}//st1-->ed1叉乘st2-->ed2的值typev xmul(point st1, point ed1, point st2, point ed2){ return (ed1.x - st1.x) * (ed2.y - st2.y) - (ed1.y - st1.y) * (ed2.x - st2.x);}typev dmul(point st1, point ed1, point st2, point ed2){ return (ed1.x - st1.x) * (ed2.x - st2.x) + (ed1.y - st1.y) * (ed2.y - st2.y);}//多边形类struct poly{ static const int N = 50005; //点数的最大值 point ps[N+5]; //逆时针存储多边形的点,[0,pn-1]存储点 int pn; //点数 poly() { pn = 0; } //加进一个点 void push(point tp){ ps[pn++] = tp; } //第k个位置 int trim(int k){ return (k+pn)%pn; } void clear(){ pn = 0; }};//返回含有n个点的点集ps的凸包poly graham(point* ps, int n){ sort(ps, ps + n, cmp); poly ans; if(n <= 2){ for(int i = 0; i < n; i++){ ans.push(ps[i]); } return ans; } ans.push(ps[0]); ans.push(ps[1]); point* tps = ans.ps; int top = -1; tps[++top] = ps[0]; tps[++top] = ps[1]; for(int i = 2; i < n; i++){ while(top > 0 && xmul(tps[top - 1], tps[top], tps[top - 1], ps[i]) <= 0) top--; tps[++top] = ps[i]; } int tmp = top; //注意要赋值给tmp! for(int i = n - 2; i >= 0; i--){ while(top > tmp && xmul(tps[top - 1], tps[top], tps[top - 1], ps[i]) <= 0) top--; tps[++top] = ps[i]; } ans.pn = top; return ans;}//求点p到st->ed的垂足,列参数方程point getRoot(point p, point st, point ed){ point ans; double u=((ed.x-st.x)*(ed.x-st.x)+(ed.y-st.y)*(ed.y-st.y)); u = ((ed.x-st.x)*(ed.x-p.x)+(ed.y-st.y)*(ed.y-p.y))/u; ans.x = u*st.x+(1-u)*ed.x; ans.y = u*st.y+(1-u)*ed.y; return ans;}//next为直线(st,ed)上的点,返回next沿(st,ed)右手垂直方向延伸l之后的点point change(point st, point ed, point next, double l){ point dd; dd.x = -(ed - st).y; dd.y = (ed - st).x; double len = sqrt(dd.x * dd.x + dd.y * dd.y); dd.x /= len, dd.y /= len; dd.x *= l, dd.y *= l; dd = dd + next; return dd;}//求含n个点的点集ps的最小面积矩形,并把结果放在ds(ds为一个长度是4的数组即可,ds中的点是逆时针的)中,并返回这个最小面积。double getMinAreaRect(point* ps, int n, point* ds){ int cn, i; double ans; point* con; poly tpoly = graham(ps, n); con = tpoly.ps; cn = tpoly.pn; if(cn <= 2){ ds[0] = con[0]; ds[1] = con[1]; ds[2] = con[1]; ds[3] = con[0]; ans=0; }else{ int l, r, u; double tmp, len; con[cn] = con[0]; ans = 1e40; l = i = 0; while(dmul(con[i], con[i+1], con[i], con[l]) >= dmul(con[i], con[i+1], con[i], con[(l-1+cn)%cn])){ l = (l-1+cn)%cn; } for(r=u=i = 0; i < cn; i++){ while(xmul(con[i], con[i+1], con[i], con[u]) <= xmul(con[i], con[i+1], con[i], con[(u+1)%cn])){ u = (u+1)%cn; } while(dmul(con[i], con[i+1], con[i], con[r]) <= dmul(con[i], con[i+1], con[i], con[(r+1)%cn])){ r = (r+1)%cn; } while(dmul(con[i], con[i+1], con[i], con[l]) >= dmul(con[i], con[i+1], con[i], con[(l+1)%cn])){ l = (l+1)%cn; } tmp = dmul(con[i], con[i+1], con[i], con[r]) - dmul(con[i], con[i+1], con[i], con[l]); tmp *= xmul(con[i], con[i+1], con[i], con[u]); tmp /= dist2(con[i], con[i+1]); len = xmul(con[i], con[i+1], con[i], con[u])/dist(con[i], con[i+1]); if(sign(tmp - ans) < 0){ ans = tmp; ds[0] = getRoot(con[l], con[i], con[i+1]); ds[1] = getRoot(con[r], con[i+1], con[i]); ds[2] = change(con[i], con[i+1], ds[1], len); ds[3] = change(con[i], con[i+1], ds[0], len); } } } return ans+eps;}int main (){ int t ,n ,i ,NN ,cas = 1; point ds[10]; scanf("%d" ,&t); while(t--) { scanf("%d" ,&NN); int n = 0; for(i = 1 ;i <= NN ;i ++) { for(int j = 1 ;j <= 4 ;j ++) { scanf("%lf %lf" ,&ps[n].x ,&ps[n].y); n++; } } double ans = getMinAreaRect(ps ,n ,ds); printf("Case #%d:\n" ,cas ++); printf("%.0lf\n" ,ans); } return 0;}
0 0
- hdu5251最小矩形覆盖
- HDU5251矩形面积(凸包+旋转卡壳求最小矩形覆盖)
- HDU5251 矩形面积 凸包-矩形覆盖
- hdu5251 凸包模板,凸包最小外接矩形面积
- 矩形包围起来的面积最小的矩形的面积(HDU5251)
- bzoj1185[HNOI2007]最小矩形覆盖
- bzoj1185【HNOI2007】最小矩形覆盖
- 1185: [HNOI2007]最小矩形覆盖
- 【HNOI2007】bzoj1185 最小矩形覆盖
- hdu-5251(矩形最小覆盖模板)
- BZOJ 1185: [HNOI2007]最小矩形覆盖
- UVA10173Smallest Bounding Rectangle+最小矩形覆盖
- BZOJ 1185 [HNOI2007]最小矩形覆盖
- 百度之星 矩形面积(最小矩形覆盖)
- uva 10173 凸包最小覆盖矩形面积
- 旋转卡壳法求点集的最小覆盖矩形面积以及周长
- BZOJ 1185 HNOI2007 最小矩形覆盖 旋转卡壳
- BZOJ 1185 HNOI 2007 最小矩形覆盖 旋转卡壳
- msp430在ccsv5下出现的问题总结
- Windows库程序之动态库程序
- 六、键盘
- Eclipse环境配置
- 虚基类
- hdu5251最小矩形覆盖
- HDU 1811 并查集
- Java socket多线程示例
- 使用C#调用SSIS包
- 求职方向
- Win2003 Enterprise x64 Edition漏洞下载地址
- 数据结构与算法分析 L1
- C++静态库与动态库
- C++9.3.7 容器删除元素--erase、clear、pop_front函数