MySQL高可用性之Keepalived+Mysql（双主热备）

来源：互联网发布：js中选中radio 编辑：程序博客网时间：2024/05/29 14:04

环境描述：

OS：CentOS6.5_X64MASTER：192.168.0.202BACKUP：192.168.0.203VIP：192.168.0.204

1、配置两台Mysql主主同步

[root@master ~]# yum install mysql-server mysql -y[root@master ~]# service mysqld start[root@master ~]# mysqladmin -u root password 123.com[root@master ~]# vi /etc/my.cnf  #开启二进制日志，设置id[mysqld]server-id = 1                    #backup这台设置2log-bin = mysql-binbinlog-ignore-db = mysql,information_schema       #忽略写入binlog日志的库auto-increment-increment = 2             #字段变化增量值auto-increment-offset = 1              #初始字段ID为1slave-skip-errors = all                       #忽略所有复制产生的错误     [root@master ~]# service mysqld restart

先查看下log bin日志和pos值位置
这里写图片描述

master配置如下：

[root@ master ~]# mysql -u root -p123.commysql> GRANT  REPLICATION SLAVE ON *.* TO 'replication'@'192.168.0.%' IDENTIFIED  BY 'replication';mysql> flush  privileges;mysql> change  master to    ->  master_host='192.168.0.203',    ->  master_user='replication',    ->  master_password='replication',    ->  master_log_file='mysql-bin.000002',    ->  master_log_pos=106;  #对端状态显示的值mysql> start  slave;         #启动同步

backup配置如下：

[root@backup ~]#  mysql -u root -p123.commysql> GRANT  REPLICATION SLAVE ON *.* TO 'replication'@'192.168.0.%' IDENTIFIED  BY 'replication';mysql> flush  privileges;mysql> change  master to    ->  master_host='192.168.0.202',    ->  master_user='replication',    ->  master_password='replication',    ->  master_log_file='mysql-bin.000002',    ->  master_log_pos=106;mysql> start  slave;

主主同步配置完毕，查看同步状态Slave_IO和Slave_SQL是YES说明主主同步成功。
这里写图片描述

在master插入数据测试下：
这里写图片描述

在backup查看是否同步成功：
这里写图片描述

可以看到已经成功同步过去，同样在backup插入到user表数据，一样同步过去，双主就做成功了。

2、配置keepalived实现热备

[root@backup ~]# yum install -y pcre-devel openssl-devel popt-devel #安装依赖包

[root@master ~]# wget http://www.keepalived.org/software/keepalived-1.2.7.tar.gz[root@master ~]# tar zxvf keepalived-1.2.7.tar.gz[root@master ~]# cd keepalived-1.2.7[root@master ~]#./configure --prefix=/usr/local/keepalivedmake && make install

将keepalived配置成系统服务

[root@master ~]# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/[root@master ~]# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/[root@master ~]# mkdir /etc/keepalived/[root@master ~]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/[root@master ~]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

[root@master ~]# vi /etc/keepalived/keepalived.conf! Configuration File forkeepalivedglobal_defs {notification_email {test@sina.com }notification_email_from  admin@test.comsmtp_server 127.0.0.1smtp_connect_timeout 30router_id MYSQL_HA      #标识，双主相同 }vrrp_instance VI_1 { state BACKUP           #两台都设置BACKUP interface eth0 virtual_router_id 51       #主备相同 priority 100           #优先级，backup设置90 advert_int 1 nopreempt             #不主动抢占资源，只在master这台优先级高的设置，backup不设置 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.0.204 }}virtual_server 192.168.0.204 3306 { delay_loop 2 #lb_algo rr              #LVS算法，用不到，我们就关闭了 #lb_kind DR              #LVS模式，如果不关闭，备用服务器不能通过VIP连接主MySQL persistence_timeout 50  #同一IP的连接60秒内被分配到同一台真实服务器 protocol TCP real_server 192.168.0.202 3306 {   #检测本地mysql，backup也要写检测本地mysql weight 3 notify_down /usr/local/keepalived/mysql.sh    #当mysq服down时，执行此脚本，杀死keepalived实现切换 TCP_CHECK { connect_timeout 3    #连接超时 nb_get_retry 3       #重试次数 delay_before_retry 3 #重试间隔时间  }}

[root@master ~]# vi /usr/local/keepalived/mysql.sh#!/bin/bashpkill keepalived[root@master ~]# chmod +x /usr/local/keepalived/mysql.sh[root@master ~]# /etc/init.d/keepalived start

backup服务器只修改priority为90、nopreempt不设置、real_server设置本地IP。

授权两台Mysql服务器允许root远程登录，用于在其他服务器登陆测试！

mysql> grant all on *.* to'root'@'192.168.0.%' identified by '123.com';mysql> flush privileges;

3、测试高可用性

1、通过Mysql客户端通过VIP连接，看是否连接成功。2、停止master这台mysql服务，是否能正常切换过去，可通过ip addr命令来查看VIP在哪台服务器上。3、可通过查看/var/log/messges日志，看出主备切换过程4、master服务器故障恢复后，是否主动抢占资源，成为活动服务器。

本文出自 “李振良的技术博客” 博客 http://lizhenliang.blog.51cto.com/7876557/1362313

0 0