Dissect Bluedroid From A2DP: Part IV: Connect and Communication
来源：互联网 发布：怎样建淘宝团购微信群 编辑：程序博客网 时间：2024/06/05 15:40
Item A. Connect a remote A2DP device:
1 Android system will try to reconnect paired A2DP device automatically after BT enable.
123456789
04-25 01:56:31.080 D/BluetoothAdapterService( 2093): Auto Connecting A2DP Profile with device 50:C9:71:0D:D2:D9 packages/apps/Bluetooth/jni/com_android_bluetooth_a2dp.cpp static jboolean connectA2dpNative(JNIEnv *env, jobject object, jbyteArray address) const bt_interface_t* btInf= getBluetoothInterface(); const btav_interface_t *sBluetoothA2dpInterface = (btav_interface_t *)btInf->get_profile_interface(BT_PROFILE_ADVANCED_AUDIO_ID); status = sBluetoothA2dpInterface->connect((bt_bdaddr_t *)addr) external/bluetooth/bluedroid/btif/src/btif_av.c btif_queue_connect(UUID_SERVCLASS_AUDIO_SOURCE, bd_addr, connect_int);//This will trigger an event in btu_task, now the caller thread returned. GKI_send_msg(BTIF_TASK, BTU_BTIF_MBOX, p_msg);
2 This will later trigger a A2DP server event API_CONNECT_REQ_EVT in state CCB_IDLE_ST:
1
05-02 01:54:33.342 I/bt-avp ( 2093): CCB ccb=0 event=API_CONNECT_REQ_EVT state=CCB_IDLE_ST
3 A2DP server handle this event in bellow two actions:
123456789101112
external/bluetooth/bluedroid/stack/avdt/avdt_ccb.c129 const UINT8 avdt_ccb_st_idle[][AVDT_CCB_NUM_COLS] = {130 /* Event Action 1 Action 2 Next state */139 /* API_CONNECT_REQ_EVT */ {AVDT_CCB_SET_CONN, AVDT_CCB_CHAN_OPEN, AVDT_CCB_OPENING_ST},//3.1 Set CCB variables associated with AVDT_ConnectReq().996 void avdt_ccb_set_conn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data) BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP, p_data->connect.sec_mask,AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG);//3.2 initiate a signaling channel connection.87 void avdt_ccb_chan_open(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data) BTM_SetOutService(p_ccb->peer_addr, BTM_SEC_SERVICE_AVDTP, AVDT_CHAN_SIG); avdt_ad_open_req(AVDT_CHAN_SIG, p_ccb, NULL, AVDT_INT);
4 How L2CAP handle this channel connection:
12345678910111213
external/bluetooth/bluedroid/stack/l2cap/l2c_api.c 229 UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr, tL2CAP_ERTM_INFO *p_ertm_info) p_lcb = l2cu_allocate_lcb (p_bd_addr, FALSE); l2cu_create_conn(p_lcb);//This function initiates an acl connection via HCI 2180 BOOLEAN l2cu_create_conn_after_switch (tL2C_LCB *p_lcb) //external/bluetooth/bluedroid/stack/hcic/hcicmds.c btsnd_hcic_create_conn (p_lcb->remote_bd_addr,HCI_PKT_TYPES_MASK_DM1 + HCI_PKT_TYPES_MASK_DH1,page_scan_rep_mode,page_scan_mode,clock_offset,allow_switch)); HCI_CMD_TO_LOWER(p_buf); //external/bluetooth/bluedroid/main/bte_main.c bt_hc_if->transmit_buf((TRANSAC)p_msg, \ (char *) (p_msg + 1), \p_msg->len); utils_enqueue(&tx_q, (void *) transac); bthc_signal_event(HC_EVENT_TX); btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK,L2CAP_LINK_CONNECT_TOUT);
5 This command will trigger connection establish process between local and remote device, accomplished by a event-driven state machine in BT stack.
Item B. a2dp_write data path:
1 A2DP client writes to A2DP data socket will trigger API_WRITE_REQ_EVT in SCB_STREAM_ST state:
12345
05-02 01:14:03.134 I/bt-avp ( 2139): SCB hdl=1 event=1/API_WRITE_REQ_EVT state=SCB_STREAM_ST394 /* state table for streaming state */395 const UINT8 avdt_scb_st_stream[][AVDT_SCB_NUM_COLS] = {396 /* Event Action 1 Action 2 Next state */398 /* API_WRITE_REQ_EVT */ {AVDT_SCB_HDL_WRITE_REQ, AVDT_SCB_CHK_SND_PKT, AVDT_SCB_STREAM_ST},
2 A2DP server handle this with bellow two actions:
12345678
//2.1 build a new media packet and stores it in the SCB.external/bluetooth/bluedroid/stack/avdt/avdt_scb_act.c1320 void avdt_scb_hdl_write_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)//2.2 send this stored media packet to L2CAP layer.1921 void avdt_scb_chk_snd_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data) avdt_ad_write_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb, p_pkt); L2CA_DataWrite(avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid, p_buf);
3 L2CAP to HCI layer
12345678910111213141516171819202122
bluedroid/stack/l2cap/l2c_api.c1633 UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data)1636 return l2c_data_write (cid, p_data, L2CAP_FLUSHABLE_CH_BASED); p_ccb = l2cu_find_ccb_by_cid (NULL, cid); l2c_csm_execute (p_ccb, L2CEVT_L2CA_DATA_WRITE, p_data); 935 static void l2c_csm_open (tL2C_CCB *p_ccb, UINT16 event, void *p_data)//Just consider channel connected state 1050 case L2CEVT_L2CA_DATA_WRITE: /* Upper layer data to send */ 1051 l2c_enqueue_peer_data (p_ccb, (BT_HDR *)p_data); 1052 l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL); 1053 break; l2c_link_check_send_pkts (p_lcb, NULL, NULL); l2c_link_send_to_lower (p_lcb, p_buf); 1341 #if BLE_INCLUDED == TRUE 1342 if (p_lcb->is_ble_link) 1344 L2C_LINK_SEND_BLE_ACL_DATA(p_buf); 1346 else 1349 L2C_LINK_SEND_ACL_DATA (p_buf); bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_ACL); bt_hc_if->transmit_buf((TRANSAC)p_msg, \(char *) (p_msg + 1),p_msg->len); bluedroid/hci/src/bt_hci_bdroid.c:249 static int transmit_buf(TRANSAC transac, char *p_buf, int len) utils_enqueue(&tx_q, (void *) transac); bthc_signal_event(HC_EVENT_TX);
4 HCI content write to hardware device driver
123456
339 static void *bt_hc_worker_thread(void *arg) if (events & HC_EVENT_TX) p_hci_if->send(sending_msg_que[i]); 593 void hci_h4_send_msg(HC_BT_HDR *p_msg) bytes_sent = userial_write(event,(uint8_t *) p,bytes_to_send); ret = write(userial_cb.fd, p_data+total, len);
Item C. Incoming data/event path:
0 Init vendor (BT chip vendor, like MRVL/TI) implement of bt_vendor_interface_t interface.
12345678910
187 void init_vnd_if(unsigned char *local_bdaddr) dlhandle = dlopen("libbt-vendor.so", RTLD_NOW); GLOBAL bt_vendor_interface_t *bt_vnd_if = (bt_vendor_interface_t *) dlsym(dlhandle, "BLUETOOTH_VENDOR_LIB_INTERFACE"); bt_vnd_if->init(&vnd_callbacks, local_bdaddr); 306 uint8_t userial_open(uint8_t port) result = bt_vendor_interface_t * bt_vnd_if->op(BT_VND_OP_USERIAL_OPEN, &fd_array); int bt_vnd_mrvl_if_op(bt_vendor_opcode_t opcode, void *param) mchar_fd = open("/dev/mbtchar0", O_RDWR); 363 pthread_create(&(userial_cb.read_thread), &thread_attr, userial_read_thread, NULL) != 0 );
1 Got a packet from hardware device driver, in HCI layer.
1234567
bluedroid/hci/src/userial.c:210static void *userial_read_thread(void *arg) rx_length = select_read(userial_cb.fd, p, READ_LIMIT); ret = read(fd, pbuf, (size_t)len); utils_enqueue(&(userial_cb.rx_q), p_buf); //bluedroid/hci/src/bt_hci_bdroid.c bthc_signal_event(HC_EVENT_RX);
2 Transfer this to L2CAP layer.
1234567891011
bluedroid/hci/src/bt_hci_bdroid.c 339 static void *bt_hc_worker_thread(void *arg) if (events & HC_EVENT_RX) p_hci_if->rcv(); uint16_t hci_h4_receive_msg(void)//Construct HCI EVENT/ACL packets and send them to stack 957 if (p_cb->p_rcv_msg->event != MSG_HC_TO_STACK_HCI_ACL) 958 btsnoop_capture(p_cb->p_rcv_msg, TRUE);//dump to HCI trace file/socket. 960 if (p_cb->p_rcv_msg->event == MSG_HC_TO_STACK_HCI_EVT) 965 bt_hc_cbacks->data_ind((TRANSAC) p_cb->p_rcv_msg, (char *) (p_cb->p_rcv_msg + 1), p_cb->p_rcv_msg->len + BT_HC_HDR_SIZE); bluedroid/main/bte_main.c:504 static int data_ind(TRANSAC transac, char *p_buf, int len) GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, transac);//handle in btu_task.
0 0
