iOS自定义cell导致数据加载混乱
来源:互联网 发布:淘宝限时抢购在哪 编辑:程序博客网 时间:2024/05/20 06:23
转载自:http://www.2cto.com/kf/201308/238449.html
UITableView继承自UIScrollview,是苹果为我们封装好的一个基于scroll的控件。上面主要是一个个的UITableViewCell,可以让UITableViewCell响应一些点击事件,也可以在UITableViewCell中加入UITextField或者UITextView等子视图,使得可以在cell上进行文字编辑。
UITableView中的cell可以有很多,一般会通过重用cell来达到节省内存的目的:通过为每个cell指定一个重用标识符(reuseIdentifier),即指定了单元格的种类,当cell滚出屏幕时,会将滚出屏幕的单元格放入重用的queue中,当某个未在屏幕上的单元格要显示的时候,就从这个queue中取出单元格进行重用。
但对于多变的自定义cell,有时这种重用机制会出错。比如,当一个cell含有一个UITextField的子类并被放在重用queue中以待重用,这时如果一个未包含任何子视图的cell要显示在屏幕上,就会取出并使用这个重用的cell显示在无任何子视图的cell中,这时候就会出错。
解决方法:
方法1 将获得cell的方法从- (UITableViewCell*)dequeueReusableCellWithIdentifier:(NSString*)identifier 换为-(UITableViewCell *)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用机制调用的就是dequeueReusableCellWithIdentifier这个方法,方法的意思就是“出列可重用的cell”,因而只要将它换为cellForRowAtIndexPath(只从要更新的cell的那一行取出cell),就可以不使用重用机制,因而问题就可以得到解决,虽然可能会浪费一些空间。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改为以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根据indexPath准确地取出一行,而不是从cell重用队列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法2 通过为每个cell指定不同的重用标识符(reuseIdentifier)来解决。
重用机制是根据相同的标识符来重用cell的,标识符不同的cell不能彼此重用。于是我们将每个cell的标识符都设置为不同,就可以避免不同cell重用的问题了。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath来唯一确定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代码
}
方法3 删除重用cell的所有子视图
这个方法是通过删除重用的cell的所有子视图,从而得到一个没有特殊格式的cell,供其他cell重用。
示例代码:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//删除cell的所有子视图
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView*)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代码
}
- iOS自定义cell导致数据加载混乱
- iOS自定义cell导致数据加载混乱
- iOS开发 -- 表加载数据时,数据混乱怎么办?!
- iOS cell重用机制导致数据重叠显示解决方法
- 加载自定义cell
- iOS cell自适应 自定义cell
- iOS--加载cell
- iOS 加载xib cell
- iOS 自定义cell
- ios UITableview自定义cell
- IOS学习 Cell自定义
- ios 自定义cell demo
- iOS UI09_自定义cell
- IOS - 自定义cell
- iOS--xib自定义cell
- iOS ---xib自定义cell
- ios 开发自定义cell
- IOS中Cell自定义
- hdu 1151 - > 双向路径搜索解决覆盖问题
- tabbar点击刷新
- Scala深入浅出实战经典:1,Scala开发环境搭建和HelloWorld解析
- 模板维护-模板解析
- af_inet 与 pf_packet
- iOS自定义cell导致数据加载混乱
- IOS navigation 返回按钮 不显示文字
- poi上传解析execl
- parcelable接口
- c++带默认参数的函数的声明、定义及使用总结
- PYTHON 双引号 单引号 多引号区别
- 斯坦福大学iOS8公开课笔记03—自动引用计数(ARC)、static、属性观察器、惰性实例化
- 由一个梦想到的
- 简单的跑马灯效果