perl核心模块解析（二）List

来源：互联网发布：亚马逊a9算法基本因素编辑：程序博客网时间：2024/05/17 10:25

perl核心模块解析（二） List

详细文档链接如下

源自：http://blog.csdn.net/jonathanxqs

转自：http://perldoc.perl.org/List/Util.html

http://www.xker.com/page/e2015/06/193925.html

在Perl中有一些专门用于处理列表数据的模块，比如说List::Util模块，该模块包含在标准库中，能提供各种高效的常见列表处理工具。因其用C语言来实现，速度一般都挺快！

【例01】扫描符合条件的某个列表，并取出第一个符合条件的
常规做法:

代码如下:

use 5.010;  
my @names  = qw(Wendy Jerry Betty Wendy Alice);  
foreach  (@names) {  
    if (/\bWendy\b/i) {  
        $match = $_;  
        last;  
    }  
}  
say $match;      

如果改用List::Util模块提供的first子程序，就要简单的多

代码如下:

use List::Util qw(first);  
my $match = first {/\bWendy\b/i} @names;  #找到第一个Wendy即终止  
如果换成数字的话，比如要求

【例02】求1到1000之间的和
常规做法:

代码如下:

use 5.010;  
my $total = 0;  
foreach (1..1000) {  
    $total += $_;  
}  
say $total;               #结果500500  

如果改用List::Util模块提供的sum子程序，同样很简单:

代码如下:

use List::Util qw(sum);  
my $total = sum(1..1000); #结果500500  

【例03】求一组数字的最大值与最小值.
常规做法:

代码如下:

#! /usr/bin/perl;    
use utf8;    
    
sub max {    
   my($max_so_far) = shift @_; #数组中第一个值，暂时当成最大值。    
   foreach(@_){                #遍历数组@_    
   if($_>$max_so_far){         #看其它元素是否有比$max_so_far大的值。   
    $max_so_far = $_;}         #如果有话，更新最大值变量    
   }    
   $max_so_far;    
}    
    
my $_MaxData = &max(2,3,8,5,10);    
print $_MaxData;               #结果为10  

如果改用List::Util模块提供的max子程序，则非常简单:

代码如下:

use List::Util qw(max);  
my $max = max(2, 3, 8, 5, 10);  
print $max;                 #结果为10  

同样道理，使用List::Util模块提供的min子程序，可求最小值:

代码如下:

use List::Util qw(min);  
my $min = min(2, 3, 8, 5, 10);  #最小值为2  

【例04】对一组字符串进行排序
如果用常规方法的话，必须按顺序一个个进行比较，用List::Util的maxstr子程序可以轻松实现:

代码如下:

use List::Util qw(maxstr);  
my  $max_str = maxstr( qw/Jerry Betty Alice Fred Barney jerry/ );  
print $max_str;  

【例05】对列表中的元素随机排序
如果用常规方法的话，很难实现，而用List::Util中的shuffle子程序，则非常简单，一条命令搞定！

代码如下:

use List::Util qw(shuffle);  
my @shuffled_nums = shuffle(1..10);   # 3 9 8 5 6 4 1 10 2 7                  
my @shuffled_name = shuffle('A'..'G');# F E G A B D   

【例06】检查列表中是否没有某个元素，或者有任何元素，或者所有元素都符合条件。支持类似grep语法
如果用常规方法的话，很难实现，而用List::MoreUtils同样很容易实现，代码如下:

代码如下:

use List::MoreUtils qw(none any all);  
my @numbers = qw(7 4 1 3 78);  
if (none {$_ > 100} @numbers) {print "No elements over 100\n"; }   
elsif (any {$_ > 50}@numbers) {print "Some elements over 50\n";}  
elsif (all {$_ <10} @numbers) {print "All elements < 10\n";}  
NOTE: List::MoreUtils非自带的模块，需要下载.

【例07】同时处理多个姓名列表，每次取出2位

代码如下:

use List::MoreUtils qw(natatime);   
my @names_1 = qw(Alice Bob Carly);  
my @names_2 = qw(David Edward Foo);  
my $names   = natatime(2, @names_1, @names_2);  #natatim (N at a time:同时处理N组)有多个列表的话往里面放就好了  
while (my @name = $names->()) {                 #遍历，方便后面输出 
    print "Got @name\n";  
}  
#输出结果  
Got Alice Bob  
Got Carly David  
Got Edward Foo  

【例08】合并多个列表为一个列表

代码如下:

use List::MoreUtils qw(mesh);  
my @array_1 = 'A' .. 'D';  
my @array_2 = 1 .. 4;  
my @array_3 = qw( jerry alice wendy );  
my @array_new = mesh(@array_1, @array_2, @array_3);  
print @array_new;  
#输出结果:  
A=>1=>jerry=> B=>2=>alice=> C=>3=>wendy=> D=>4 

第1次: 第一个列表中取A，第二个列表中取出1，第三个列表中取出jerry
第2次: 第一个列表中取B, 第二个列表中取出2，第三个列表中取出alice
......
依次类推！
【例09】往指定的字符串中加字符
可以用List::MoreUtils中的insert_after子程序

代码如下:

use v5.10;  
use List::MoreUtils qw(:all);  
  
my @list = qw/This is a list/;  
insert_after {$_ eq 'a'} "longer" => @list;  
print @list;  #This is a longer list 

【例10】对两个列表进行操作，第一个列表平方后，和第二个列表求和
可以用List::MoreUtils中的pairwise子程序

代码如下:

use v5.10;  
use List::MoreUtils qw(:all);  
  
@m = (1..4);  
@n = (100..103);  
@x = pairwise { ($a*$a) + $b } @m, @n;  #101 105 111 119  

【总结】
如果上面的方式用普通的方法实现，需要多次循环遍历，很麻烦，而将复杂的算法，数据结构用C来实现并封装在List模块中，则可以实现很多看似复杂的功能，从中也可以看出Perl的强大之处在于CPAN，有众多的模块支撑！

【Reference】

List::Util

NAME
SYNOPSIS
DESCRIPTION
LIST-REDUCTION FUNCTIONS
- $result = reduce { BLOCK } @list
- any
- all
- none
- notall
- first
- max
- maxstr
- min
- minstr
- product
- sum
- sum0
KEY/VALUE PAIR LIST FUNCTIONS
- pairgrep
- pairfirst
- pairmap
- pairs
- pairkeys
- pairvalues
OTHER FUNCTIONS
- shuffle
KNOWN BUGS
- RT #95409
SUGGESTED ADDITIONS
SEE ALSO
COPYRIGHT

NAME

List::Util - A selection of general-utility list subroutines

SYNOPSIS

    use List::Util qw(first max maxstr min minstr reduce shuffle sum);

DESCRIPTION

List::Util contains a selection of subroutines that people have expressed would be nice to have in the perl core, but the usage would not really be high enough to warrant the use of a keyword, and the size so small such that being individual extensions would be wasteful.

By default List::Util does not export any subroutines.

LIST-REDUCTION FUNCTIONS

The following set of functions all reduce a list down to a single value.

$result = reduce { BLOCK } @list

Reduces @list by calling BLOCK in a scalar context multiple times, setting $a and $b each time. The first call will be with $a and $b set to the first two elements of the list, subsequent calls will be done by setting $a to the result of the previous call and $b to the next element in the list.

Returns the result of the last call to the BLOCK . If @list is empty then undef is returned. If @list only contains one element then that element is returned and BLOCK is not executed.

The following examples all demonstrate how reduce could be used to implement the other list-reduction functions in this module. (They are not in fact implemented like this, but instead in a more efficient manner in individual C functions).

    $foo = reduce { defined($a)            ? $a :
                    $code->(local $_ = $b) ? $b :
                                             undef } undef, @list # first
    $foo = reduce { $a > $b ? $a : $b } 1..10       # max
    $foo = reduce { $a gt $b ? $a : $b } 'A'..'Z'   # maxstr
    $foo = reduce { $a < $b ? $a : $b } 1..10       # min
    $foo = reduce { $a lt $b ? $a : $b } 'aa'..'zz' # minstr
    $foo = reduce { $a + $b } 1 .. 10               # sum
    $foo = reduce { $a . $b } @bar                  # concat
    $foo = reduce { $a || $code->(local $_ = $b) } 0, @bar   # any
    $foo = reduce { $a && $code->(local $_ = $b) } 1, @bar   # all
    $foo = reduce { $a && !$code->(local $_ = $b) } 1, @bar  # none
    $foo = reduce { $a || !$code->(local $_ = $b) } 0, @bar  # notall
       # Note that these implementations do not fully short-circuit

If your algorithm requires that reduce produce an identity value, then make sure that you always pass that identity value as the first argument to prevent undef being returned

  $foo = reduce { $a + $b } 0, @values;             # sum with 0 identity value

The remaining list-reduction functions are all specialisations of this generic idea.

any

    my $bool = any { BLOCK } @list;

Since version 1.33.

Similar to grep in that it evaluates BLOCK setting $_ to each element of @list in turn. any returns true if any element makes the BLOCK return a true value. If BLOCK never returns true or @list was empty then it returns false.

Many cases of using grep in a conditional can be written using any instead, as it can short-circuit after the first true result.

    if( any { length > 10 } @strings ) {
        # at least one string has more than 10 characters
    }

all

    my $bool = all { BLOCK } @list;

Since version 1.33.

Similar to any, except that it requires all elements of the @list to make the BLOCK return true. If any element returns false, then it returns false. If the BLOCK never returns false or the @list was empty then it returns true.

none

notall

    my $bool = none { BLOCK } @list;
    my $bool = notall { BLOCK } @list;

Since version 1.33.

Similar to any and all, but with the return sense inverted. none returns true only if no value in the @list causes theBLOCK to return true, and notall returns true only if not all of the values do.

first

    my $val = first { BLOCK } @list;

Similar to grep in that it evaluates BLOCK setting $_ to each element of @list in turn. first returns the first element where the result from BLOCK is a true value. If BLOCK never returns true or @list was empty then undef is returned.

    $foo = first { defined($_) } @list    # first defined value in @list
    $foo = first { $_ > $value } @list    # first value in @list which
                                          # is greater than $value

max

    my $num = max @list;

Returns the entry in the list with the highest numerical value. If the list is empty then undef is returned.

    $foo = max 1..10                # 10
    $foo = max 3,9,12               # 12
    $foo = max @bar, @baz           # whatever

maxstr

    my $str = maxstr @list;

Similar to max, but treats all the entries in the list as strings and returns the highest string as defined by the gtoperator. If the list is empty then undef is returned.

    $foo = maxstr 'A'..'Z'          # 'Z'
    $foo = maxstr "hello","world"   # "world"
    $foo = maxstr @bar, @baz        # whatever

min

    my $num = min @list;

Similar to max but returns the entry in the list with the lowest numerical value. If the list is empty then undef is returned.

    $foo = min 1..10                # 1
    $foo = min 3,9,12               # 3
    $foo = min @bar, @baz           # whatever

minstr

    my $str = minstr @list;

Similar to min, but treats all the entries in the list as strings and returns the lowest string as defined by the ltoperator. If the list is empty then undef is returned.

    $foo = minstr 'A'..'Z'          # 'A'
    $foo = minstr "hello","world"   # "hello"
    $foo = minstr @bar, @baz        # whatever

product

    my $num = product @list;

Since version 1.35.

Returns the numerical product of all the elements in @list . If @list is empty then 1 is returned.

    $foo = product 1..10            # 3628800
    $foo = product 3,9,12           # 324

sum

    my $num_or_undef = sum @list;

Returns the numerical sum of all the elements in @list . For backwards compatibility, if @list is empty then undef is returned.

    $foo = sum 1..10                # 55
    $foo = sum 3,9,12               # 24
    $foo = sum @bar, @baz           # whatever

sum0

    my $num = sum0 @list;

Since version 1.26.

Similar to sum, except this returns 0 when given an empty list, rather than undef.

KEY/VALUE PAIR LIST FUNCTIONS

The following set of functions, all inspired by List::Pairwise, consume an even-sized list of pairs. The pairs may be key/value associations from a hash, or just a list of values. The functions will all preserve the original ordering of the pairs, and will not be confused by multiple pairs having the same "key" value - nor even do they require that the first of each pair be a plain string.

pairgrep

    my @kvlist = pairgrep { BLOCK } @kvlist;
    my $count = pairgrep { BLOCK } @kvlist;

Since version 1.29.

Similar to perl's grep keyword, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in scalar context, with $a and $b set to successive pairs of values from the @kvlist .

Returns an even-sized list of those pairs for which the BLOCK returned true in list context, or the count of the number of pairs in scalar context. (Note, therefore, in scalar context that it returns a number half the size of the count of items it would have returned in list context).

    @subset = pairgrep { $a =~ m/^[[:upper:]]+$/ } @kvlist

As with grep aliasing $_ to list elements, pairgrep aliases $a and $b to elements of the given list. Any modifications of it by the code block will be visible to the caller.

pairfirst

    my ( $key, $val ) = pairfirst { BLOCK } @kvlist;
    my $found = pairfirst { BLOCK } @kvlist;

Since version 1.30.

Similar to the first function, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in scalar context, with $a and $b set to successive pairs of values from the @kvlist .

Returns the first pair of values from the list for which the BLOCK returned true in list context, or an empty list of no such pair was found. In scalar context it returns a simple boolean value, rather than either the key or the value found.

    ( $key, $value ) = pairfirst { $a =~ m/^[[:upper:]]+$/ } @kvlist

As with grep aliasing $_ to list elements, pairfirst aliases $a and $b to elements of the given list. Any modifications of it by the code block will be visible to the caller.

pairmap

    my @list = pairmap { BLOCK } @kvlist;
    my $count = pairmap { BLOCK } @kvlist;

Since version 1.29.

Similar to perl's map keyword, but interprets the given list as an even-sized list of pairs. It invokes the BLOCK multiple times, in list context, with $a and $b set to successive pairs of values from the @kvlist .

Returns the concatenation of all the values returned by the BLOCK in list context, or the count of the number of items that would have been returned in scalar context.

    @result = pairmap { "The key $a has value $b" } @kvlist

As with map aliasing $_ to list elements, pairmap aliases $a and $b to elements of the given list. Any modifications of it by the code block will be visible to the caller.

See KNOWN BUGS for a known-bug with pairmap , and a workaround.

pairs

    my @pairs = pairs @kvlist;

Since version 1.29.

A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of ARRAY references, each containing two items from the given list. It is a more efficient version of

    @pairs = pairmap { [ $a, $b ] } @kvlist

It is most convenient to use in a foreach loop, for example:

    foreach my $pair ( pairs @KVLIST ) {
       my ( $key, $value ) = @$pair;
       ...
    }

Since version 1.39 these ARRAY references are blessed objects, recognising the two methods key and value . The following code is equivalent:

    foreach my $pair ( pairs @KVLIST ) {
       my $key   = $pair->key;
       my $value = $pair->value;
       ...
    }

pairkeys

    my @keys = pairkeys @kvlist;

Since version 1.29.

A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of the the first values of each of the pairs in the given list. It is a more efficient version of

    @keys = pairmap { $a } @kvlist

pairvalues

    my @values = pairvalues @kvlist;

Since version 1.29.

A convenient shortcut to operating on even-sized lists of pairs, this function returns a list of the the second values of each of the pairs in the given list. It is a more efficient version of

    @values = pairmap { $b } @kvlist

OTHER FUNCTIONS

shuffle

    my @values = shuffle @values;

Returns the values of the input in a random order

    @cards = shuffle 0..51      # 0..51 in a random order

KNOWN BUGS

RT #95409

https://rt.cpan.org/Ticket/Display.html?id=95409

If the block of code given to pairmap contains lexical variables that are captured by a returned closure, and the closure is executed after the block has been re-used for the next iteration, these lexicals will not see the correct values. For example:

 my @subs = pairmap {
    my $var = "$a is $b";
    sub { print "$var\n" };
 } one => 1, two => 2, three => 3;
 $_->() for @subs;

Will incorrectly print

 three is 3
 three is 3
 three is 3

This is due to the performance optimisation of using MULTICALL for the code block, which means that fresh SVs do not get allocated for each call to the block. Instead, the same SV is re-assigned for each iteration, and all the closures will share the value seen on the final iteration.

To work around this bug, surround the code with a second set of braces. This creates an inner block that defeats theMULTICALL logic, and does get fresh SVs allocated each time:

 my @subs = pairmap {
    {
       my $var = "$a is $b";
       sub { print "$var\n"; }
    }
 } one => 1, two => 2, three => 3;

This bug only affects closures that are generated by the block but used afterwards. Lexical variables that are only used during the lifetime of the block's execution will take their individual values for each invocation, as normal.

SUGGESTED ADDITIONS

The following are additions that have been requested, but I have been reluctant to add due to them being very simple to implement in perl

  # How many elements are true
  sub true { scalar grep { $_ } @_ }
  # How many elements are false
  sub false { scalar grep { !$_ } @_ }

COPYRIGHT

Recent additions and current maintenance by Paul Evans, <leonerd@leonerd.org.uk>.

0 0

perl核心模块解析（二）List

List::Util

NAME

SYNOPSIS

DESCRIPTION

LIST-REDUCTION FUNCTIONS

$result = reduce { BLOCK } @list

any

all

none

notall

first

max

maxstr

min

minstr

product

sum

sum0

KEY/VALUE PAIR LIST FUNCTIONS

pairgrep

pairfirst

pairmap

pairs

pairkeys

pairvalues

OTHER FUNCTIONS

shuffle

KNOWN BUGS

RT #95409

SUGGESTED ADDITIONS

SEE ALSO

COPYRIGHT