poj 2031(prim)
来源:互联网 发布:微商加粉软件免费下载 编辑:程序博客网 时间:2024/05/22 09:03
Language:
Building a Space Station
Time Limit: 1000MS Memory Limit: 30000KTotal Submissions: 5944 Accepted: 2952
Description
You are a member of the space station engineering team, and are assigned a task in the construction process of the station. You are expected to write a computer program to complete the task.
The space station is made up with a number of units, called cells. All cells are sphere-shaped, but their sizes are not necessarily uniform. Each cell is fixed at its predetermined position shortly after the station is successfully put into its orbit. It is quite strange that two cells may be touching each other, or even may be overlapping. In an extreme case, a cell may be totally enclosing another one. I do not know how such arrangements are possible.
All the cells must be connected, since crew members should be able to walk from any cell to any other cell. They can walk from a cell A to another cell B, if, (1) A and B are touching each other or overlapping, (2) A and B are connected by a `corridor', or (3) there is a cell C such that walking from A to C, and also from B to C are both possible. Note that the condition (3) should be interpreted transitively.
You are expected to design a configuration, namely, which pairs of cells are to be connected with corridors. There is some freedom in the corridor configuration. For example, if there are three cells A, B and C, not touching nor overlapping each other, at least three plans are possible in order to connect all three cells. The first is to build corridors A-B and A-C, the second B-C and B-A, the third C-A and C-B. The cost of building a corridor is proportional to its length. Therefore, you should choose a plan with the shortest total length of the corridors.
You can ignore the width of a corridor. A corridor is built between points on two cells' surfaces. It can be made arbitrarily long, but of course the shortest one is chosen. Even if two corridors A-B and C-D intersect in space, they are not considered to form a connection path between (for example) A and C. In other words, you may consider that two corridors never intersect.
The space station is made up with a number of units, called cells. All cells are sphere-shaped, but their sizes are not necessarily uniform. Each cell is fixed at its predetermined position shortly after the station is successfully put into its orbit. It is quite strange that two cells may be touching each other, or even may be overlapping. In an extreme case, a cell may be totally enclosing another one. I do not know how such arrangements are possible.
All the cells must be connected, since crew members should be able to walk from any cell to any other cell. They can walk from a cell A to another cell B, if, (1) A and B are touching each other or overlapping, (2) A and B are connected by a `corridor', or (3) there is a cell C such that walking from A to C, and also from B to C are both possible. Note that the condition (3) should be interpreted transitively.
You are expected to design a configuration, namely, which pairs of cells are to be connected with corridors. There is some freedom in the corridor configuration. For example, if there are three cells A, B and C, not touching nor overlapping each other, at least three plans are possible in order to connect all three cells. The first is to build corridors A-B and A-C, the second B-C and B-A, the third C-A and C-B. The cost of building a corridor is proportional to its length. Therefore, you should choose a plan with the shortest total length of the corridors.
You can ignore the width of a corridor. A corridor is built between points on two cells' surfaces. It can be made arbitrarily long, but of course the shortest one is chosen. Even if two corridors A-B and C-D intersect in space, they are not considered to form a connection path between (for example) A and C. In other words, you may consider that two corridors never intersect.
Input
The input consists of multiple data sets. Each data set is given in the following format.
n
x1 y1 z1 r1
x2 y2 z2 r2
...
xn yn zn rn
The first line of a data set contains an integer n, which is the number of cells. n is positive, and does not exceed 100.
The following n lines are descriptions of cells. Four values in a line are x-, y- and z-coordinates of the center, and radius (called r in the rest of the problem) of the sphere, in this order. Each value is given by a decimal fraction, with 3 digits after the decimal point. Values are separated by a space character.
Each of x, y, z and r is positive and is less than 100.0.
The end of the input is indicated by a line containing a zero.
n
x1 y1 z1 r1
x2 y2 z2 r2
...
xn yn zn rn
The first line of a data set contains an integer n, which is the number of cells. n is positive, and does not exceed 100.
The following n lines are descriptions of cells. Four values in a line are x-, y- and z-coordinates of the center, and radius (called r in the rest of the problem) of the sphere, in this order. Each value is given by a decimal fraction, with 3 digits after the decimal point. Values are separated by a space character.
Each of x, y, z and r is positive and is less than 100.0.
The end of the input is indicated by a line containing a zero.
Output
For each data set, the shortest total length of the corridors should be printed, each in a separate line. The printed values should have 3 digits after the decimal point. They may not have an error greater than 0.001.
Note that if no corridors are necessary, that is, if all the cells are connected without corridors, the shortest total length of the corridors is 0.000.
Note that if no corridors are necessary, that is, if all the cells are connected without corridors, the shortest total length of the corridors is 0.000.
Sample Input
310.000 10.000 50.000 10.00040.000 10.000 50.000 10.00040.000 40.000 50.000 10.000230.000 30.000 30.000 20.00040.000 40.000 40.000 20.00055.729 15.143 3.996 25.8376.013 14.372 4.818 10.67180.115 63.292 84.477 15.12064.095 80.924 70.029 14.88139.472 85.116 71.369 5.5530
Sample Output
20.0000.00073.834
Source
Japan 2003 Domestic
/*题意:就是给出三维坐标系上的一些球的球心坐标和其半径,搭建通路,使得他们能够相互连通。如果两个球有重叠的部分则算为已连通,无需再搭桥。求搭建通路的最小费用(费用就是边权,就是两个球面之间的距离)。*/#include <iostream>#include <algorithm>#include <cstdio>#include <cstring>#include <string>#include <queue>#include <map>#include <stack>#include <set>#include <cmath>#include <vector>#include<cstdlib>#define INF 1000000007#define eps 1e-6#pragma comment (linker,"/STACK:102400000,102400000")using namespace std;#define maxn 1500int vis[maxn];double map_[maxn][maxn];double dis[maxn];struct node_{ double x; double y; double z; double r;}node[maxn];int n;double get_dis(int i,int j){ if( sqrt( (node[i].x-node[j].x)*(node[i].x-node[j].x) + (node[i].y-node[j].y)*(node[i].y-node[j].y) + (node[i].z-node[j].z)*(node[i].z-node[j].z) )<(node[i].r+node[j].r) ) return 0; else return sqrt( (node[i].x-node[j].x)*(node[i].x-node[j].x) + (node[i].y-node[j].y)*(node[i].y-node[j].y) + (node[i].z-node[j].z)*(node[i].z-node[j].z) ) - (node[i].r+node[j].r);}void prim(){ double min_cost=0; memset(vis,0,sizeof(vis)); for(int i=1;i<=n;i++) dis[i]=map_[1][i]; dis[1]=0; vis[1]=1; for(int i=1;i<=n;i++) { double minn=1.0*INF; int k=-1; for(int j=1;j<=n;j++) if(!vis[j] && dis[j]<minn) minn=dis[k=j]; if(k!=-1) { min_cost+=minn; vis[k]=1; for(int j=1;j<=n;j++) if(dis[j]>map_[k][j]) dis[j]=map_[k][j]; } } printf("%.3f\n",min_cost);}int main(){ while(~scanf("%d",&n)) { if(!n) break; for(int i=1;i<=n;i++) scanf("%lf%lf%lf%lf",&node[i].x,&node[i].y,&node[i].z,&node[i].r); for(int i=1;i<=n;i++) for(int j=1;j<=n;j++) { map_[i][j]=get_dis(i,j); } prim(); } return 0;}
1 0
- poj 2031(prim)
- poj 2031 最小生成树(prim)
- POJ 2031(prim+空间坐标)
- POJ 2031 prim
- POJ 2485(prim 算法)
- POJ 2253-Frogger (Prim)
- poj 1251 (Prim算法)
- POJ 3026 (BFS+Prim)
- POJ 3625(朴素prim)
- POJ 1278(细节prim)
- POJ - 1287----Networking(prim)
- POJ 1258(prim算法)
- poj 2031--Building a Space Station(prim)
- POJ-2031 最小生成树(prim算法)
- POJ 2031:Building a Space Station (Prim)
- 【prim】 poj 2031 Building a Space Station
- POJ 2031:Building a Space Station【Prim】
- poj 2031 Building a Space station(prim)
- 《第一行代码》读书笔记(一)----活动
- 微信开发第二篇了解微信运行机理,并简单介绍服务器被动交互一些功能
- python中类的定义
- ubuntu 下apt-get update 遇到Encountered a section with no Package: header
- C#泛型详解
- poj 2031(prim)
- Android离线打包
- C# Winform简单绘图 (在直角坐标系中画折线)
- select 实现分析 –2 【整理】
- Quartz的SimpleThreadPool
- ubuntu虚拟机配置
- 天声人語 20150828
- 代码规范
- 【SCOI2005】【BZOJ1087】互不侵犯King