bzoj2276【poi2011】Temperature

2276: [Poi2011]Temperature

Time Limit: 20 Sec  Memory Limit: 32 MB
Submit: 417  Solved: 174
[Submit][Status][Discuss]

Description

The Byteotian Institute of Meteorology (BIM) measures the air temperature daily. The measurement is done automatically, and its result immediately printed. Unfortunately, the ink in the printer has long dried out... The employees of BIM however realised the fact only recently, when the Byteotian Organisation for Meteorology (BOM) requested access to that data. 

An eager intern by the name of Byteasar saved the day, as he systematically noted down the temperatures reported by two domestic alcohol thermometers placed on the north and south outside wall of the BIM building. It was established decades ago by various BIM employees that the temperature reported by the thermometer on the south wall of the building is never lower than the actual temperature, while that reported by the thermometer on the north wall of the building is never higher than the actual temperature. Thus even though the exact temperatures for each day remain somewhat of a mystery, the range they were in is known at least. 

Fortunately for everyone involved (except Byteasar and you, perhaps), BOM does not require exact temperatures. They only want to know the longest period in which the temperature was not dropping (i.e. on each successive day it was no smaller than on the day before). In fact, the veteran head of BIM knows very well that BOM would like this period as long as possible. To whitewash the negligence he insists that Byteasar determines, based on his valuable notes, the longest period in which the temperature could have been not dropping. Now this is a task that Byteasar did not quite expect on his BIM internship, and he honestly has no idea how to tackle it. He asks you for help in writing a program that determines the longest such period. 

某国进行了连续n天的温度测量，测量存在误差，测量结果是第i天温度在[l_i,r_i]范围内。
求最长的连续的一段，满足该段内可能温度不降。

Input

In the first line of the standard input there is one integer n(1<=N<=1000000) that denotes the number of days for which Byteasar took notes on the temperature. The measurements from day are given in the line no.i+1 Each of those lines holds two integers, x and y (-10^9<=x<=y<=10^9). These denote, respectively, the minimum and maximum possible temperature on that particular day, as reported by the two thermometers. 

In some of the tests, worth 50 points in total, the temperatures never drop below -50 degrees (Celsius, in case you wonder!) and never exceeds 50 degrees (-50<=x<=y<=50)  

第一行n
下面n行，每行l_i，r_i
1<=n<=1000000

Output

In the first and only line of the standard output your program should print a single integer, namely the maximum number of days for which the temperature in Byteotia could have been not dropping. 

一行，表示该段的长度

Sample Input

6

6 10

1 5

4 8

2 5

6 8

3 5

Sample Output

4

HINT

Source

首先我们考虑某几天温度可能不降的条件，只需要每一天的最高温度大于这一天之前的所有最低温度的最大值。

所以用单调队列维护几天内最低温度的最大值，同时记录以每一天为终点可以达到的最多天数，最后对这些天数求最大值即可。

#include<iostream>#include<cstring>#include<cmath>#include<algorithm>#include<cstdio>#define F(i,j,n) for(int i=j;i<=n;i++)#define D(i,j,n) for(int i=j;i>=n;i--)#define LL long long#define MAXN 1000005using namespace std;int n,h,t,ans,l[MAXN],r[MAXN],f[MAXN],q[MAXN];int main(){scanf("%d",&n);F(i,1,n) scanf("%d%d",&l[i],&r[i]);f[0]=h=1;t=0;F(i,1,n){while (t>=h&&l[q[t]]<=l[i]) t--;q[++t]=i;f[i]=f[i-1];while (l[q[h]]>r[i]) f[i]=q[h++]+1;}F(i,1,n) ans=max(ans,i-f[i]+1);printf("%d\n",ans);}