文件I/O实践(1) --基础API
来源:互联网 发布:mac上怎么用office 编辑:程序博客网 时间:2024/05/17 02:26
什么是I/O
输入/输出是内存和外设之间拷贝数据的过程:
设备->内存: 输入操作
内存->设备: 输出操作
高级I/O: ANSI C提供的标准I/O库函数成为高级I/O, 也称为带缓冲的I/O;
低级I/O: Linux 提供的系统调用, 通常也称为不带缓冲的I/O;
文件描述符
对于Linux内核而言, 所有的文件或设备都对应一个文件描述符(Linux的设计哲学: 一切皆文件), 这样可以简化系统编程的复杂程度;
当打开/创建一个文件的时候, 内核向进程返回一个文件描述符(是一个非负整数). 后续对文件的操作只需通过该文件描述符即可进行, 内核记录有关这个打开文件的信息;
一个进程启动时, 默认已经打开了3个文件, 标准输入(0, STDIN_FILENO), 标准输出(1, STDOUT_FILENO), 标准错误输出(2, STDERR_FILENO), 这些常量定义在unistd.h头文件中;
其中, 文件描述符基本上是与文件描述指针(FILE*)一一对应的, 如文件描述符0,1,2 对应 stdin, stdout, stderr;
文件指针与文件描述符的转换
fileno: 将文件指针转换成文件描述符
int fileno(FILE *stream);
fdopen: 将文件描述符转换成文件指针
FILE *fdopen(int fd, const char *mode);
- //示例
- int main()
- {
- cout << "fileno(stdin) = " << fileno(stdin) << endl;
- cout << "fileno(stdout) = " << fileno(stdout) << endl;
- cout << "fileno(stderr) = " << fileno(stderr) << endl;
- return 0;
- }
文件I/O API
1.open
- #include <sys/types.h>
- #include <sys/stat.h>
- #include <fcntl.h>
- int open(const char *pathname, int flags);
- int open(const char *pathname, int flags, mode_t mode);
参数:
pathname: 文件名, 可以包含[绝对/相对]路径名;
flags: 文件打开模式;
mode: 用来指定对文件所有者, 文件用户组以及系统中的其他用户的访问权限;
注意: newMode = mode & ~umask
flags常用值
- //示例1
- int main()
- {
- int fd = open("test.txt", O_RDONLY);
- if (fd == -1)
- {
- cerr << "file open error, errno = " << errno <<
- "\nstrerror: " << strerror(errno) << endl;
- perror("perror");
- exit(EXIT_FAILURE);
- }
- cout << "file open success" << endl;
- }
- //示例2
- inline void err_exit(std::string message)
- {
- perror(message.c_str());
- exit(EXIT_FAILURE);
- }
- int main()
- {
- umask(0000);
- int fd = open("test.txt", O_RDWR|O_CREAT|O_EXCL, 0666);
- if (fd == -1)
- err_exit("file open error");
- else
- cout << "file descriptor = " << fd << endl;
- }
[附]
(1). umask API
//改变umask值
mode_t umask(mode_t mask);
(2). ulimit -a
查看系统中的各种限制;
其中-n: 查看一个进程所能够打开的最大文件数
(3). cat /proc/sys/fs/file-max
查看一个系统能够支持的最大打开文件数(该数与内存大小有关)
2.close
- #include <unistd.h>
- int close(int fd);
关闭文件描述符, 使得文件描述符得以重新利用
3.read
- ssize_t read(int fd, void *buf, size_t count);
返回值:
错误: -1
到达文件尾: 0
成功: 返回从文件复制到规定缓冲区的字节数
4.wirte
- ssize_t write(int fd, const void *buf, size_t count);
返回值:
错误: -1
什么都没做: 0
成功: 返回成功写入文件的字节数
注意:
write返回大于0时, 并不代表buf的内容已经写入到磁盘上的文件中了, 其仅仅代表buf中的数据已经copy到相应的内核缓冲区了. 要实现将缓冲区的内容真正”冲洗”到磁盘上的文件, 需要调用fsync函数;
int fsync(int fd);
其将内核缓冲区中尚未写入磁盘的内容同步到文件系统中;
其实在open调用的时候也可以指定同步选项:O_SYNC O_SYNC The file is opened for synchronous I/O. Any write(2)s on the resulting file descriptor will block the calling process until the data has been physically written to the underlying hardware.
write会等到将buf的内容真正的写入到磁盘才真正返回;
- //示例: 带有O_SYNC选项
- int main(int argc, char *argv[])
- {
- if (argc < 3)
- {
- cerr << "Usage : " << argv[0] << " src dest" << endl;
- exit(EXIT_FAILURE);
- }
- int infd = open(argv[1], O_RDONLY);
- if (infd == -1)
- err_exit("file O_RDONLY error");
- int outfd = open(argv[2], O_WRONLY|O_CREAT|O_TRUNC|O_SYNC, 0666);
- if (outfd == -1)
- err_exit("file O_WRONLY error");
- char buf[1024];
- int readBytes, writeBytes;
- while ((readBytes = read(infd, buf, sizeof(buf))) > 0)
- {
- writeBytes = write(outfd, buf, readBytes);
- cout << "readBytes = " << readBytes
- << ", writeBytes = " << writeBytes << endl;
- }
- }
文件的随机读写
5.lseek
对应于C库函数中的fseek, 通过指定相对于当前位置, 末尾位置或开始位置的字节数来重定位currp:
- off_t lseek(int fd, off_t offset, int whence);
返回值: 新的文件偏移值;
Whence取值:
SEEK_SET
The offset is set to offset bytes.
SEEK_CUR
The offset is set to its current location plus offset bytes.
SEEK_END
The offset is set to the size of the file plus offset bytes.
- //示例1
- int main(int argc, char *argv[])
- {
- int fd = open("test.txt", O_RDONLY);
- if (fd == -1)
- err_exit("open error");
- char buf[1024] = {0};
- int readBytes = read(fd, buf, 5);
- cout << "readBytes = " << readBytes << ", buf: " << buf << endl;
- int seekCount = lseek(fd, 0, SEEK_CUR);
- cout << "current offset = " << seekCount << endl;
- }
- //示例2: 产生空洞文件
- int main(int argc, char *argv[])
- {
- int fd = open("hole.txt", O_WRONLY|O_CREAT|O_TRUNC|O_EXCL, 0666);
- if (fd == -1)
- err_exit("open error");
- if (write(fd, "ABCDE", 5) == -1)
- err_exit("first write error");
- //创建一个1G的文件
- if (lseek(fd, 1024*1024*1024, SEEK_CUR) == -1)
- err_exit("lseek error");
- if (write(fd, "Hello", 5) == -1)
- err_exit("second write error");
- close(fd);
- }
[附]
-查看hole.txt文件
od -c hole.txt
cat -A hole.txt
-查看该文件大小
du -h hole.txt
du -b hole.txt
du -k hole.txt
du -m hole.txt
目录访问
6.opendir
- #include <sys/types.h>
- #include <dirent.h>
- DIR *opendir(const char *name);
返回值:
成功: 返回目录指针;
失败: 返回NULL;
7.readdir
- struct dirent *readdir(DIR *dirp);
返回值:
成功: 返回一个指向dirent结构的指针, 它包含指定目录的下一个连接的细节;
没有更多连接时, 返回0;
- struct dirent
- {
- ino_t d_ino; /* inode number */
- off_t d_off; /* not an offset; see NOTES */
- unsigned short d_reclen; /* length of this record */
- unsigned char d_type; /* type of file; not supported
- by all filesystem types */
- char d_name[256]; /* filename */
- };
8.closedir: 关闭目录
- int closedir(DIR *dirp);
- //示例: 简单的ls程序
- int main(int argc, char *argv[])
- {
- if (argc < 2)
- {
- cerr << "Usage : " << argv[0] << " <directory>" << endl;
- exit(EXIT_FAILURE);
- }
- DIR *dir = opendir(argv[1]);
- if (dir == NULL)
- err_exit("opendir error");
- struct dirent *ent;
- while ((ent = readdir(dir)) != NULL)
- {
- //过滤掉隐藏文件
- if (ent->d_name[0] == '.')
- continue;
- cout << ent->d_name << "\ti-node: " << ent->d_ino
- << ", length: " << ent->d_reclen << endl;
- }
- closedir(dir);
- }
9.mkdir
- int mkdir(const char *pathname, mode_t mode);
10.rmdir: 删除空目录
- int rmdir(const char *pathname);
11. Chmod, fchmod更改权限
- int chmod(const char *path, mode_t mode);
- int fchmod(int fd, mode_t mode);
12.chown,fchown更改文件所有者/所属组
- int chown(const char *path, uid_t owner, gid_t group);
- int fchown(int fd, uid_t owner, gid_t group);
- 文件I/O实践(1) --基础API
- 文件I/O实践(1) --基础API
- 文件I/O实践(1) --基础API
- 文件I/O实践(1) --基础API
- linux 文件I/O API
- java API 文件,I/O
- 文件I/O实践(2) --文件stat
- 文件I/O实践(2) --文件stat
- 文件I/O实践(2) --文件stat
- 文件I/O实践(2) --文件stat
- 基础加强-13-文件导航、I/O
- lua基础【五】I/O文件操作
- 文件I/O实践(3) --文件共享与fcntl
- 文件I/O实践(3) --文件共享与fcntl
- 文件I/O实践(3) --文件共享与fcntl
- 文件I/O实践(3) --文件共享与fcntl
- 文件I/O(1)
- APUE 1 文件I/O
- Bootstrat(一)
- Windows 设置护眼色的两种方法
- 列出display的值,并说明它们的作用
- 欢迎使用CSDN-markdown编辑器
- hdu 5429 Geometric Progression(高精度)
- 文件I/O实践(1) --基础API
- 适配iOS9https请求
- The Importance of Algorithms
- C++学习笔记17——函数重载
- 第六周-建立链栈算法库
- MyBatis配置一对一
- java.lang.SecurityException: Need BLUETOOTH ADMIN permission: Neither user 10047 nor current process
- HDU4460(最短路)
- ZOJ 3908 Number Game(乱搞)