a20_TF_Waiting for root device /dev/mmcblk1p2...

来源：互联网发布：mac 打开系统文件夹编辑：程序博客网时间：2024/05/23 12:02

ERROR!!!!!

sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
<6>ALSA device list:
ALSA device list:
<6> #0: sunxi-CODEC Audio Codec
#0: sunxi-CODEC Audio Codec
<6> #1: sunxi-sndspdif
#1: sunxi-sndspdif
<6>Waiting for root device /dev/mmcblk1p2...
Waiting for root device /dev/mmcblk1p2...

解！！！

[mmc0_para]
sdc_used            = 1
sdc_detmode         = 1
sdc_buswidth        = 4
sdc_clk             = port:PF02<2><1><2><default>
sdc_cmd             = port:PF03<2><1><2><default>
sdc_d0              = port:PF01<2><1><2><default>
sdc_d1              = port:PF00<2><1><2><default>
sdc_d2              = port:PF05<2><1><2><default>
sdc_d3              = port:PF04<2><1><2><default>
sdc_det             = port:PH09<0><1><default><default>   //此处问题！！！！！！！！！！！！！！！！！！！！！！！！

2,100M 网卡问题

;-------------------------------------------------------------------------------;Ethernet MAC configuration;-------------------------------------------------------------------------------[emac_para]emac_used           = 1emac_rxd3           = port:PA00<2><default><default><default>emac_rxd2           = port:PA01<2><default><default><default>emac_rxd1           = port:PA02<2><default><default><default>emac_rxd0           = port:PA03<2><default><default><default>emac_txd3           = port:PA04<2><default><default><default>emac_txd2           = port:PA05<2><default><default><default>emac_txd1           = port:PA06<2><default><default><default>emac_txd0           = port:PA07<2><default><default><default>emac_rxclk          = port:PA08<2><default><default><default>emac_rxerr          = port:PA09<2><default><default><default>emac_rxdV           = port:PA10<2><default><default><default>emac_mdc            = port:PA11<2><default><default><default>emac_mdio           = port:PA12<2><default><default><default>emac_txen           = port:PA13<2><default><default><default>emac_txclk          = port:PA14<2><default><default><default>emac_crs            = port:PA15<2><default><default><default>emac_col            = port:PA16<2><default><default><default>emac_reset          = port:PA17<1><default><default><default>

3, LEDS

[leds_para]
leds_used = 1
leds_num = 1
leds_pin_1 = port:PH26<1><default><default><0>
leds_name_1 = "led1"
leds_default_1 = 0
leds_trigger_1 = "heartbeat"

0 0