NetHogs - Monitor Per Process Network Bandwidth Usage in Real Time

原文链接：http://www.tecmint.com/nethogs-monitor-per-process-network-bandwidth-usage-in-real-time/

Linux operating systems have tons of open source network monitoring tools on the web. Say, you can use iftop command to check bandwidth usage, netstat command to see reports on interface statistics or top command to watch running process on your system. But if you are really looking for something that can give you a real time statistics of your network bandwidth of per process usage, then NetHogsis the only utility you should look for.

What is NetHogs?

NetHogs is an open source command line program (similar to Linux top command) that is used for monitor real time network traffic bandwidth used by each process or application.

From NetHogs Project Page

NetHogs is a small ‘net top’ tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process. NetHogs does not rely on a special kernel module to be loaded. If there’s suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to identify programs that have gone wild and are suddenly taking up your bandwidth.

This article explains you on how to install and find out real time per process network bandwidth usage with nethogs utility under Unix/Linux operating systems.

Install NetHogs in RHEL, CentOS and Fedora

To install nethogs, you must turn on EPEL repository under your Linux systems and then run the following yum command to download and install nethogs package.

# yum install nethogs

Sample Output

[root@tecmint ~]# yum -y install nethogsLoaded plugins: fastestmirror, refresh-packagekitLoading mirror speeds from cached hostfile * base: mirrors.hns.net.in * epel: mirror.nus.edu.sg * extras: mirrors.hns.net.in * rpmfusion-free-updates: mirrors.ustc.edu.cn * rpmfusion-nonfree-updates: mirror.de.leaseweb.net * updates: mirrors.hns.net.inSetting up Install ProcessResolving Dependencies--> Running transaction check---> Package nethogs.i686 0:0.8.0-1.el6 will be installed--> Finished Dependency ResolutionDependencies Resolved=========================================================================================================== PackageArchVersionRepositorySize===========================================================================================================Installing: nethogsi6860.8.0-1.el6epel28 kTransaction Summary===========================================================================================================Install       1 Package(s)Total download size: 28 kInstalled size: 50 kDownloading Packages:nethogs-0.8.0-1.el6.i686.rpm|  28 kB     00:00Running rpm_check_debugRunning Transaction TestTransaction Test SucceededRunning Transaction  Installing : nethogs-0.8.0-1.el6.i686                                                          1/1  Verifying  : nethogs-0.8.0-1.el6.i686                                                          1/1Installed:  nethogs.i686 0:0.8.0-1.el6Complete!

Install NetHogs in Ubuntu, Linux Mint and Debian

To install nethogs, type the following apt-get command to install nethogs package.

$ sudo apt-get install nethogs

Sample Output

tecmint@tecmint:~$ sudo apt-get install nethogs[sudo] password for tecmint: Reading package lists... DoneBuilding dependency tree       Reading state information... DoneThe following NEW packages will be installed:  nethogs0 upgraded, 1 newly installed, 0 to remove and 318 not upgraded.Need to get 27.1 kB of archives.After this operation, 100 kB of additional disk space will be used.Get:1 http://in.archive.ubuntu.com/ubuntu/ quantal/universe nethogs i386 0.8.0-1 [27.1 kB]Fetched 27.1 kB in 1s (19.8 kB/s)  Selecting previously unselected package nethogs.(Reading database ... 216058 files and directories currently installed.)Unpacking nethogs (from .../nethogs_0.8.0-1_i386.deb) ...Processing triggers for man-db ...Setting up nethogs (0.8.0-1) ...

Using NetHogs Utility

To run the nethogs utility, type the following command under red-hat based systems.

# nethogs

To execute it, you will must have root permissions, so run with sudo command as shown.

$ sudo nethogs

Sample Previews:

NetHogs Preview on CentOS 6.3

NetHogs Preview on Ubuntu 12.10

As you see above the send and received lines show the amount of traffic being used by per process. The total sent and received usage of bandwidth calculated at the bottom. You can sort and change the order by using the interactive controls discussed below.

NetHogs Command Line Options

Following are the nethogs command line options. Using ‘-d‘ to add a refresh rate and ‘device name‘ to monitor specific given device or devices bandwidth (default is eth0). For example, to set 5 seconds as your refresh rate, then type the command as.

# nethogs -d 5

$ sudo nethogs -d 5

To monitor specific device (eth0) network bandwidth only, use the command as.

# nethogs eth0

$ sudo nethogs eth0

To monitor network bandwidth of both eth0 and eth1 interfaces, type the following command.

# nethogs eth0 eth1

$ sudo nethogs eth0 eth1

Other Options and Usage

-d : delay for refresh rate.-h : display available commands usage.-p : sniff in promiscious mode (not recommended).-t : tracemode.-V : prints Version info.

NetHogs Interactive Controls

Following are some useful interactive controls (Keyboard Shortcuts) of nethogs program.

-m : Change the units displayed for the bandwidth in units like KB/sec -> KB -> B-> MB.-r : Sort by magnitude of respectively traffic.-s : Sort by magnitude of sent traffic.-q : Hit quit to the shell prompt.

For a full list of nethogs utility command line options, please check out the nethogs man pages by using command as ‘man nethogs‘ or ‘sudo man nethogs‘ from the terminal. For more information visit theNethogs project home page.