CentOS7 中使用NTP进行时间同步
来源:互联网 发布:unity 引擎源码 编辑:程序博客网 时间:2024/05/22 13:28
1. NTP时钟同步方式说明
NTP在linux下有两种时钟同步方式,分别为直接同步和平滑同步:
直接同步
使用ntpdate命令进行同步,直接进行时间变更。如果服务器上存在一个12点运行的任务,当前服务器时间是13点,但标准时间时11点,使用此命令可能会造成任务重复执行。因此使用ntpdate同步可能会引发风险,因此该命令也多用于配置时钟同步服务时第一次同步时间时使用。
平滑同步
使用ntpd进行时钟同步,可以保证一个时间不经历两次,它每次同步时间的偏移量不会太陡,是慢慢来的,这正因为这样,ntpd平滑同步可能耗费的时间比较长。标准时钟同步服务
http://www.pool.ntp.org/zone/cn网站包含全球的标准时间同步服务,也包括对中国时间的同步,对应的URL为cn.pool.ntp.org
,在其中也描述了ntp配置文件中的建议写法:
server 1.cn.pool.ntp.org
server 3.asia.pool.ntp.org
server 2.asia.pool.ntp.org
2. 环境情况
准备四台电脑,分别为:
3. 检查服务是否安装
- 使用rpm检查ntp包是否安装
[root@localhost kevin]# rpm -q ntpntp-4.2.6p5-19.el7.centos.3.x86_64
- 如果已经安装则略过此步,否则使用yum进行安装,并设置系统开机自动启动并启动服务
[root@localhost kevin]# yum -y install ntp[root@localhost kevin]# systemctl enable ntpd[root@localhost kevin]# systemctl start ntpd
4. 设置ntp服务器: 192.168.11.212
配置前先使用命令:
ntpdate -u cn.pool.ntp.org
,同步服务器
- 修改/etc/ntp.conf文件,红色字体是修改的内容
# For more information about this file, see the man pages# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).driftfile /var/lib/ntp/drift# Permit time synchronization with our time source, but do not# permit the source to query or modify the service on this system.restrict default nomodify notrap nopeer noquery# Permit all access over the loopback interface. This could# be tightened as well, but to do so would effect some of# the administrative functions.restrict 127.0.0.1restrict ::1# Hosts on local network are less restricted.#restrict 192.168.1.0 mask 255.255.255.0 nomodify notraprestrict 172.16.248.0 mask 255.255.255.0 nomodify notrap# Use public servers from the pool.ntp.org project.# Please consider joining the pool (http://www.pool.ntp.org/join.html).#server 0.centos.pool.ntp.org iburstserver 2.cn.pool.ntp.orgserver 1.asia.pool.ntp.orgserver 2.asia.pool.ntp.org#broadcast 192.168.1.255 autokey # broadcast server#broadcastclient # broadcast client#broadcast 224.0.1.1 autokey # multicast server#multicastclient 224.0.1.1 # multicast client#manycastserver 239.255.254.254 # manycast server#manycastclient 239.255.254.254 autokey # manycast client# 允许上层时间服务器主动修改本机时间restrict 2.cn.pool.ntp.org nomodify notrap noqueryrestrict 1.asia.pool.ntp.org nomodify notrap noqueryrestrict 2.asia.pool.ntp.org nomodify notrap noqueryserver 127.0.0.1 # local clockfudge 127.0.0.1 stratum 10# Enable public key cryptography.#cryptoincludefile /etc/ntp/crypto/pw# Key file containing the keys and key identifiers used when operating# with symmetric key cryptography. keys /etc/ntp/keys# Specify the key identifiers which are trusted.#trustedkey 4 8 42# Specify the key identifier to use with the ntpdc utility.#requestkey 8# Specify the key identifier to use with the ntpq utility.#controlkey 8# Enable writing of statistics records.#statistics clockstats cryptostats loopstats peerstats# Disable the monitoring facility to prevent amplification attacks using ntpdc# monlist command when default restrict does not include the noquery flag. See# CVE-2013-5211 for more details.# Note: Monitoring will not be disabled with the limited restriction flag.disable monitor
修改完成后重启ntpd服务
systemctl restart ntpd
使用ntpq -p 查看网络中的NTP服务器,同时显示客户端和每个服务器的关系
使用ntpstat 命令查看时间同步状态,这个一般需要5-10分钟后才能成功连接和同步。所以,服务器启动后需要稍等下:
刚启动的时候,一般是:
# ntpstat unsynchronised time server re-starting polling server every 64 s
连接并同步后:
# ntpstat synchronised to NTP server (202.112.10.36) at stratum 3 time correct to within 275 ms polling server every 256 s
5. 设置ntp客户端: 172.16.248.129|130|131
安装ntp服务并设置为自动启动,和前面的设置方式相同。然后编辑/etc/ntp.conf文件,红色字体为变化的内容。
# For more information about this file, see the man pages# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).driftfile /var/lib/ntp/drift# Permit time synchronization with our time source, but do not# permit the source to query or modify the service on this system.restrict default nomodify notrap nopeer noquery# Permit all access over the loopback interface. This could# be tightened as well, but to do so would effect some of# the administrative functions.restrict 127.0.0.1restrict ::1# Hosts on local network are less restricted.#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap# Use public servers from the pool.ntp.org project.# Please consider joining the pool (http://www.pool.ntp.org/join.html).#server 0.centos.pool.ntp.org iburstserver 172.16.248.1restrict 172.16.248.1 nomodify notrap noqueryserver 127.0.0.1fudge 127.0.0.1 stratum 10#broadcast 192.168.1.255 autokey # broadcast server#broadcastclient # broadcast client#broadcast 224.0.1.1 autokey # multicast server#multicastclient 224.0.1.1 # multicast client#manycastserver 239.255.254.254 # manycast server#manycastclient 239.255.254.254 autokey # manycast client# Enable public key cryptography.#cryptoincludefile /etc/ntp/crypto/pw # Key file containing the keys and key identifiers used when operating# with symmetric key cryptography. keys /etc/ntp/keys # Specify the key identifiers which are trusted.#trustedkey 4 8 42# Specify the key identifier to use with the ntpdc utility.#requestkey 8# Specify the key identifier to use with the ntpq utility.#controlkey 8# Enable writing of statistics records.#statistics clockstats cryptostats loopstats peerstats# Disable the monitoring facility to prevent amplification attacks using ntpdc# monlist command when default restrict does not include the noquery flag. See# CVE-2013-5211 for more details.# Note: Monitoring will not be disabled with the limited restriction flag.disable monitor
重启ntpd服务
#systemctl restart ntpd
启动后,查看同步情况
# ntpq -p# ntpstat
因为是内网,一般ntpstat很快就可以同步上。
- CentOS7 中使用NTP进行时间同步
- CentOS7使用NTP进行时间同步
- CentOS7 多台电脑使用NTP进行时间同步
- centos7集群中NTP设置时间同步
- CentOS 7 中使用NTP进行时间同步
- CentOS 7 中使用NTP进行时间同步
- centos7局域网同步时间ntp
- centos7 配置时间同步服务器ntp
- 使用ntp进行时钟同步
- linux 中NTP时间同步
- 集群中Ntp时间同步
- 使用NTP同步系统时间
- 使用ntp服务同步时间
- 通过NTP协议进行时间同步
- 通过NTP协议进行时间同步
- 部署NTP服务器进行时间同步
- 通过NTP协议进行时间同步
- centos7.2上搭建ntp服务器,并实现时间同步
- 顺序表
- 求两数组中位数
- 1031 查验身份证
- median-of-two-sorted-arrays
- 【鸟哥的linux私房菜-学习笔记】linux的帐号与群组
- CentOS7 中使用NTP进行时间同步
- jade初学认识
- 1032 挖掘技术哪家强
- React-native单元测试框架-Jest
- IO流文件传输
- 1033 旧键盘打字
- 多重循环程序(嵌套循环)一
- 期望最大化(EM)算法与高斯混合模型(GMM)证明
- 小议iOS------block传值 回调传值