Openresty + MySQL + Redis 安装篇
来源:互联网 发布:oracle示例数据库 编辑:程序博客网 时间:2024/06/06 14:15
Openresty + MySQL + Redis 安装篇
安装环境
VMWare + CentOS 6.7 32 位
Linux AlexWoo-CentOS 2.6.32-573.el6.i686 #1 SMP Thu Jul 23 12:37:35 UTC 2015 i686 i686 i386 GNU/Linux
MySQL 5.7.9 安装
下载
wget http://dev.mysql.com/get/Downloads/MySQL-5.7/mysql-5.7.9-linux-glibc2.5-i686.tar.gz
安装
安装参考 http://dev.mysql.com/doc/refman/5.7/en/binary-installation.html
如果原有系统安装过 MySQL,需要将其完全删除,一般需要清除 /usr/local/mysql/,/var/lib/mysql/,/var/log/mysql.log,/etc/my.cnf,/etc/mysql/
开始安装:
# tar xzf mysql-5.7.9-linux-glibc2.5-i686.tar.gz# mv mysql-5.7.9-linux-glibc2.5-i686 /usr/local/mysql# groupadd -r mysql# useradd -r -g mysql mysql# mkdir mysql-files# chmod -R 770 /usr/local/mysql# cd /usr/local/mysql# chown -R mysql:mysql ./# bin/mysqld --initialize --user=mysql# bin/mysql_ssl_rsa_setup# chown -R root ./# chown -R mysql data# cp support-files/mysql.server /etc/init.d/mysql.server
完成 bin/mysqld –initialize –user=mysql 后,会有一条日志:
2015-10-24T17:25:38.101341Z 1 [Note] A temporary password is generated for root@localhost: _4#Ernwu9xf:
记住这个密码,5.7 版本完成安装后,默认是需要密码登录的,修改密码:
./mysqladmin -u root -h localhost password 'your new password' -p
手工启动 MySQL:
# /usr/local/mysql/bin/mysqld_safe --user=mysql &
手工停止 MySQL:
# /usr/local/mysql/bin/mysqladmin shutdown -p
启动 MySQL 服务:
# service mysql start
停止 MySQL 服务:
# service mysql stop
使用客户端接入:
mysql -h localhost -u root -p
Redis 2.8.23 安装
下载
wget https://github.com/antirez/redis/archive/2.8.23.tar.gz
安装
注意:不要把 redis 安装到公网能够访问的机器上
# tar xzf 2.8.23.tar.gz# cd redis-2.8.23/# make && make install# utils/install_server.sh
以上最后一步为将 redis 安装成系统服务,按照默认安装后,相关的配置和日志文件位置
Port : 6379Config file : /etc/redis/6379.confLog file : /var/log/redis_6379.logData dir : /var/lib/redis/6379Executable : /usr/local/bin/redis-serverCli Executable : /usr/local/bin/redis-cli
启动 redis 服务:
service redis_6379 start
停止 redis 服务:
service redis_6379 stop
客户端接入:
redis-cli
OpenResty 1.9.3.1 安装
下载
下载 pcre 安装包
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.36.tar.bz2
下载 zlib 安装包
wget http://zlib.net/zlib-1.2.8.tar.gz
下载 openssl 安装包
wget http://www.openssl.org/source/openssl-1.0.2d.tar.gz
下载 openresty 安装包
wget https://openresty.org/download/ngx_openresty-1.9.3.1.tar.gz
下载 drizzle 安装包(注:openresty 访问 MySQL 使用 drizzle 模块需要安装这个包)
wget http://openresty.org/download/drizzle7-2011.07.21.tar.gz
下载 lua-resty-http(这是一个基于 nginx socket 的 HTTP 客户端库)
wget https://github.com/pintsized/lua-resty-http/archive/v0.06.zip
安装
安装 pcre
# tar xjf pcre-8.36.tar.bz2# cd pcre-8.36# ./configure# make && make install
安装 zlib
# tar xzf zlib-1.2.8.tar.gz# cd zlib-1.2.8# ./configure# make && make install
安装 drizzle 客户端
# tar xzf drizzle7-2011.07.21.tar.gz# cd drizzle7-2011.07.21# ./configure --without-server# make libdrizzle-1.0# make install-libdrizzle-1.0# ln -s /usr/local/lib/libdrizzle.so.1 /usr/lib/libdrizzle.so.1
安装 openresty
# mkdir /usr/local/openresty# tar xzf openssl-1.0.2d.tar.gz# mv openssl-1.0.2d /usr/local/openresty/openssl# tar xzf ngx_openresty-1.9.3.1.tar.gz# cd ngx_openresty-1.9.3.1# ./configure \ --with-http_stub_status_module \ --with-http_gzip_static_module \ --with-http_ssl_module --with-openssl=/usr/local/openresty/openssl \ --with-http_drizzle_module# gmake && gmake install
安装 lua-resty-http
# unzip v0.06.zip# cp lua-resty-http-0.06/lib/resty/* /usr/local/openresty/lualib/resty/
为 www 账户创建 openresty 运行环境
# cp -r /usr/local/openresty/nginx/ /home/www# chown -R www:www /home/www/nginx# su - www$ echo 'export PATH=$PATH:$HOME/nginx/sbin' >> .bash_profile$ source .bash_profile$ echo 'alias nginx="nginx -p /home/www/nginx"' >> .bashrc$ source .bashrc
完成以上操作后,www 账户就可以启动 nginx 了,此时需注意 nginx 默认的监听端口是 80,这个端口是不能被普通用户绑定的,因此需要修改 ~/nginx/conf/nginx.conf 中的端口号,如 8080
iptables 配置
解禁 8080 端口
# iptables -I INPUT -p tcp --dport 8080 -j ACCEPT# service iptables save
将 80 端口映射到 8080 端口
# iptables -I INPUT -p tcp --dport 8080 -j ACCEPT# iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8080# service iptables save
注:这里映射需要将目标端口号(8080)的访问权限打开,而访问端口号(80)的访问权限不用打开。使用 service iptables save 将修改保存到 /etc/sysconfig/iptables 文件中
上面命令中
- 第一条为打开 8080 端口的访问权限
- 第二条为打开外部网络的 NAT 转发
- 第三条为打开 loopback 网卡的 NAT 转发
- 第四条为将上面配置更新到 /etc/sysconfig/iptables 里
使用 HTTPS
Nginx 的 HTTPS 需要使用 http_ssl_module 模块,前面在 Openresty 安装的时候已经加载了该模块
生成私钥和证书
$ cd /home/www/nginx/conf$ openssl genrsa -des3 -out myopenresty.key 1024$ openssl req -new -key myopenresty.key -out myopenresty.csr$ openssl rsa -in myopenresty.key -out myopenresty.key$ openssl x509 -req -days 365 -in myopenresty.csr -signkey myopenresty.key -out myopenresty.crt
- myopenresty.key 为服务器私钥
- myopenresty.crt 为服务器证书
配置Nginx
server { listen 8443 ssl; server_name localhost; ssl_certificate myopenresty.crt; ssl_certificate_key myopenresty.key; ssl_session_cache shared:SSL:1m; ssl_session_timeout 5m; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { root html; index index.html index.htm; }}
因为我们不是用 root 账户进行启动的,因此,监听端口需要改为8443,然后使用 iptables 进行端口映射
需要注意,新增加 8443 端口,不能使用 nginx -s reload 重新加载配置,而需要将 Nginx 停止后,再重新启动,才能进行监听
iptables 配置
将 443 端口映射到 8443 端口
# iptables -I INPUT -p tcp --dport 8443 -j ACCEPT# iptables -t nat -A PREROUTING -p tcp --dport 443 -j REDIRECT --to-ports 8443# service iptables save
环境验证
在 www 账户的 ~/nginx/conf/nginx.conf 的 http 的 server 下添加以下配置
location /test { default_type "text/plain"; content_by_lua ' ngx.say("Hello,world!") ';}
打开网页,访问 http://your.host/test,可以看到网页上输出 Hello,world! 字样,以此判断环境安装成功
- Openresty + MySQL + Redis 安装篇
- 安装openresty+redis+lua
- Nginx-openresty+mysql+redis使用篇(一)
- 编译安装openresty+mysql+php7
- 编译安装openresty+mysql+php7
- openresty-redis
- Openresty最佳案例 | 第6篇:OpenResty连接Mysql
- Openresty最佳案例 | 第3篇:Openresty的安装
- Openresty 安装
- 安装openresty
- 安装OpenResty
- 安装OpenResty
- openresty--安装
- openResty-----安装
- 关于OpenResty的redis
- OpenResty连接Redis
- Openresty最佳案例 | 第7篇: 模块开发、OpenResty连接Redis
- openresty 前端开发入门四之Redis篇
- 复数类完整实现 + 四则运算符重载
- 欢迎使用CSDN-markdown编辑器
- RTTI简介
- Lesson 29 SVD decomposition
- Struts2 防止重复提交
- Openresty + MySQL + Redis 安装篇
- Frobenius product
- 欢迎使用CSDN-markdown编辑器
- 一看就明白的爬虫入门讲解:基础理论篇
- 深入剖析 linux GCC 4.4 的 STL string
- Oracle 11g R2通过透明网关连接DB2 详细步骤
- SVD decomposition and polar decomposition
- Android-(广播接收器)BroadcastReceiver-2
- 数据库查询优化方案(处理上百万级记录如何提高处理查询速度)